On the role of grain topology in dynamic grain growth - 2D microstructural modeling

Tectonophysics

Volumn 427, Issue 1-4, 2006, Pages 73-93

  Kellermann Slotemaker, A ^a   de Bresser, J H P ^a  

^a UTRECHT UNIVERSITY   (Netherlands)

Author keywords

Aspect ratio; Deformation; Grain growth; Topology

Indexed keywords

CALCITE; GRAIN BOUNDARY; GRAIN SIZE; MICROSTRUCTURE; MYLONITE; RECRYSTALLIZATION; TOPOLOGY; TWO-DIMENSIONAL MODELING;

EID: 33750886548     PISSN: 00401951     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tecto.2006.05.017     Document Type: Article

References (63)

1. Anderson M.P. Simulation of grain growth in two and three dimensions. In: Hansen N., Jensen D.J., Leffers T., and Ralph B. (Eds). Annealing Processes-Recovery, Recrystallization and Grain Growth. Proc. 7th int. Symp. on Metallurgy and Materials Science (1988) 15-34
2. Ashby M.F., and Verrall R.A. Diffusion-accommodated flow and superplasticity. Acta Metallurgica 21 2 (1973) 149-163
3. Atkinson H.V. Theories of normal grain growth in pure single phase systems. Acta Metallurgica 36 3 (1988) 469-491
4. Barnhoorn A., Bystricky M., Burlini L., and Kunze K. The role of recrystallisation on the deformation behaviour of calcite rocks: large strain torsion experiments on Carrara marble. Journal of Structural Geology 26 5 (2004) 885-903
5. Barr T.D., and Houseman G.A. Distribution of deformation around a fault in a non-linear ductile medium. Geophysical Research Letters 19 11 (1992) 1145-1148
6. Barr T.D., and Houseman G.A. Deformation fields around a fault embedded in a non-linear ductile medium. Geophysical Journal International 125 (1996) 473-490
7. Bate P. The effect of deformation on grain growth in Zener pinned systems. Acta Materialia 49 8 (2001) 1453-1461
8. Bergmann R.B., Shi F.G., Queisser H.J., and Krinke J. Formation of polycrystalline silicon with log-normal grain size distribution. Applied Surface Science 123-124 (1998) 376-380
9. Bons, P.D., 1993. Experimental deformation of polyphase rock analogues. Geological Ultraiectina 110 (Ph.D. Thesis, Utrecht University), Utrecht, 207 pp.
10. Bons P., and Urai J.L. Syndeformational grain growth: microstructures and kinetics. Journal of Structural Geology 14 8/9 (1992) 1101-1109
11. Bons P.D., Barr T.D., and ten Brink C.E. The development of δ-clasts in non-linear viscous materials: numerical approach. Tectonophysics 270 (1997) 29-41
12. Braun J., Chéry J., Poliakov A., Mainprice D., Vauchez A., Tomassi A., and Daignières M. A simple parameterization of strain localization in the ductile regime due to grain size reduction: a case study for olivine. Journal of Geophysical Research 104 B11 (1999) 25167-25181
13. Burke J.E., and Turnbull D. Recrystallization and grain growth in metals. Progress in Metal Physics 3 (1952) 220-292
14. Bystricky M., Kunze K., Burlini L., and Burg J.-P. High shear strain of olivine aggregates: rheological and seismic consequences. Science 290 (2000) 1564-1567
15. Clark M.A., and Alden T.H. Deformation enhanced grain growth in a superplastic Sn-1% Bi alloy. Acta Metallurgica 21 9 (1973) 1195-1206
16. Dijkstra, A.H., 2001. Deformation and melt in natural mantle rocks: the Hilti Massif (Oman) and the Othris Massif (Greece). Ph.D. Thesis, Utrecht University, Utrecht, 164 pp.
17. Evans B., Renner J., and Hirth G. A few remarks on the kinetics of static grain growth in rocks. International Journal of Earth Sciences 90 (2001) 88-103
18. Fayad W., Thompson C.V., and Frost H.J. Steady-state grain-size distributions resulting from grain growth in two dimensions. Scripta Materialia 40 10 (1999) 1199-1204
19. Ford J.M., Wheeler J., and Movchan A.B. Computer simulation of grain-boundary diffusion creep. Acta Materialia 50 15 (2002) 3941-3955
20. Haslam A.J., Moldovan D., Yamakov V., Wolf D., Phillpot S.R., and Gleiter H. Stress-enhanced grain growth in a nanocrystalline material by molecular-dynamics simulation. Acta Materialia 51 7 (2003) 2097-2112
21. Haslam A.J., Yamakov V., Moldovan D., Wolf D., Phillpot S.R., and Gleiter H. Effects of grain growth on grain-boundary diffusion creep by molecular-dynamics simulation. Acta Materialia 52 7 (2004) 1971-1987
22. Herwegh M., and Berger A. Deformation mechanisms in second-phase affected microstructures and their energy balance. Journal of Structural Geology 26 8 (2004) 1483-1498
23. Herwegh M., De Bresser J.H.P., and Ter Heege J.H. Combining natural microstructures with composite flow laws: an improved approach for the extrapolation of lab data to nature. Journal of Structural Geology 27 3 (2005) 503-521
24. Hillert M. On the theory of normal and abnormal grain growth. Acta Metallurgica 13 (1965) 227-238
25. Hirth G., and Kohlstedt D.L. Experimental constraints on the dynamics of the partially molten upper mantle: deformation in the diffusion creep regime. Journal of Geophysical Research 100 B2 (1995) 1981-2001
26. Holm E.A., Srolovitz D.J., and Cahn J.W. Microstructural evolution in two-dimensional two-phase polycrystals. Acta Metallurgica et Materialia 41 4 (1993) 1119-1136
27. Holm K., Embury J.D., and Purdy G.R. The structure and properties of microduplex Zr-Nb alloys. Acta Metallurgica 25 10 (1977) 1191-1200
28. Jessell M., Bons P., Evans L., Barr T., and Stuwe K. Elle: the numerical simulation of metamorphic and deformation microstructures. Computers & Geosciences 27 1 (2001) 17-30
29. Jessell M., Bons P.D., Evans B., and Piazolo S. Numerical experiments into the localization of deformation during recrystallization flow. Material Science Forum 467-470 (2004) 647-652
30. Jessell M., Siebert E., Bons P.D., and Evans L. A new type of numerical experiment on the spatial and temporal patterns of localization of deformation in a material with a coupling of grain-size and rheology. Earth and Planetary Science Letters 239 3-4 (2005) 309-326
31. Karato S.I., Paterson M.S., and FitzGerald J.D. Rheology of synthetic olivine aggregates: influence of grain size and water. Journal of Geophysical Research 91 B8 (1986) 8151-8176
32. Kellermann Slotemaker A., De Bresser J.H.P., Spiers C.J., and Drury M. Microstructural evolution of synthetic forsterite aggregates deformed to high strain. Material Science Forum 467-470 Part 1 (2004) 579-584
33. Kim B.-N., and Hiraga K. Simulation of diffusional creep accompanied by grain growth in two-dimensional polycrystalline solids. Acta Materialia 48 16 (2000) 4151-4159
34. Kim B.-N., Hiraga K., Sakka Y., and Ahn B.-W. A grain-boundary diffusion model of dynamic grain growth during superplastic deformation. Acta Materialia 47 12 (1999) 3433-3439
35. Krabbendam M., Urai J.L., and Van Vliet L.J. Grain size stabilisation by dispersed graphite in a high-grade quartz mylonite: an example from Naxos (Greece). Journal of Structural Geology 25 6 (2003) 855-866
36. Mas D.L., and Crowley P.D. The effect of second-phase particles on stable grain size in regionally metamorphosed polyphase calcite marbles. Journal of Metamorphic Geology 14 2 (1996) 155-162
37. 2O. Journal of Geophysical Research 104 B8 (1999) 17,823-17,845
38. Michibayashi K. Syntectonic development of a strain-independent steady-state grain size during mylonitization. Tectonophysics 222 (1993) 151-164
39. Montesi L.G.J., and Hirth G. Grain size evolution and the rheology of ductile shear zones: from laboratory experiments to postseismic creep. Earth and Planetary Science Letters 211 1-2 (2003) 97-110
40. Olgaard D.L. The role of second phase in localizing deformation. In: Knipe R.J., and Rutter E.H. (Eds). Deformation Mechanisms, Rheology and Tectonics. Geological Society Special Pubications (1990), Geological Society of London, London, United Kingdom 175-181
41. Piazolo, S., 2001. Shape fabric development during progressive deformation. Ph.D. Thesis, Johannes Gutenberg-Universität, Mainz, 251 pp.
42. Piazolo S., Bons P.D., Jessell M.W., Evans L., and Passchier C.W. Dominance of microstructural processes and their effect on microstructural development: insights from numerical modeling of dynamic recrystallization. In: De Meer S., Drury M.R., De Bresser J.H.P., and Pennock G.M. (Eds). Deformation Mechanisms, Rheology and Tectonics: Current Status and Future Perspectives. Special Publications vol. 200 (2002), Geological Society, London 149-170
43. Pieri M., Burlini L., Kunze K., Stretton I., and Olgaard D.L. Rheological and microstructural evolution of Carrara marble with high shear strain: results from high temperature torsion experiments. Journal of Structural Geology 23 (2001) 1393-1413
44. Rabinovich M.K., and Trifonov V.G. Dynamic grain growth during superplastic deformation. Acta Materialia 44 5 (1996) 2073-2078
45. Ranalli G. Grain size distribution and flow stress in tectonites. Journal of Structural Geology 6 4 (1984) 443-447
46. Rutter E.H. Experimental study of the influence of stress, temperature, and strain on the dynamic recrystallization of Carrara marble. Journal of Geophysical Research 100 B12 (1995) 24,651-24,664
47. Rutter E.H. Use of extension testing to investigate the influence of finite strain on the Theological behaviour of marble. Journal of Structural Geology 20 2-3 (1998) 243-254
48. Sato E., Kuribayashi K., and Horiuchi R. A mechanism of superplastic deformation and deformation induced grain growth based on grain switching. Materials Research Society Symposium Proceedings 196 (1990) 27-32
49. Seidensticker J.R., and Mayo M.J. Dynamic and static grain growth during the superplastic deformation of 3Y-TZP. Scripta Materialia 38 7 (1998) 1091-1100
50. Seidensticker J.R., and Mayo M.J. A topological rationale for the dependence of grain growth on strain during superplastic deformation. Acta Materialia 46 14 (1998) 4883-4893
51. Schmid S.M., Boland J.N., and Paterson M.S. Superplastic flow in fine grained limestone. Tectonophysics 43 3-4 (1977) 257-291
52. Schmid S.M., Panozzo R., and Bauer S. Simple shear experiments on calcite rocks: rheology and microfabric. Journal of Structural Geology 9 (1987) 747-778
53. Sherwood D.J., and Hamilton C.H. Production of cellular defects contributing to deformation-enhanced grain growth. Scripta Metallurgica et Materialia 27 12 (1992) 1771-1776
54. Sherwood D.J., and Hamilton C.H. The neighbourswitching mechanism of superplastic deformation: the constitutive relationship and deformation-enhanced grain growth. Philosophical Magazine 70 (1994) 109-143
55. Ter Heege J.H., De Bresser J.H.P., and Spiers C.J. Composite flow laws for crystalline materials with log-normally distributed grain size: theory and application to olivine. Journal of Structural Geology 26 9 (2004) 1693-1705
56. Ter Heege J.H., De Bresser J.H.P., and Spiers C.J. Dynamic recrystallization of wet synthetic polycrystalline halite: dependence of grain size distribution on flow stress, temperature and strain. Tectonophysics 396 1-2 (2005) 35-57
57. Urai J.L., and Jessell M. Recrystallization and grain growth in minerals: recent developments. In: Gottstein G., and Molodov D. (Eds). Recrystallization and Grain Growth. Proceedings of the First Joint International Conference (2001), Springer Verlag, RWTH Aachen, Germany 87-96
58. Von Neumann J. Discussion to 'Grain shapes and other metallurgical applications of topology' by C.S. Smith. In: Brick R.M. (Ed). Metal Interfaces (1952), ASM, Cleveland, Ohio 108-110
59. Walker A.N., Rutter E.H., and Brodie K.H. Experimental study of grain-size sensitive flow of synthetic, hot-pressed calcite rocks. In: Knipe R.J., and Rutter E.H. (Eds). Deformation mechanisms, rheology and tectonics. Geological Society Special Publications (1990), Geological Society of London, London, United Kingdom 259-284
60. Weaire D., and Kermode J.P. Computer simulation of a two-dimensional froth: I. Method and motivation. Philosophical Magazine. B 48 No.3 (1983) 245-259
61. Wilkinson D.S., and Caceres C.H. On the mechanism of strain-enhanced grain growth during superplastic deformation. Acta Metallurgica 32 9 (1984) 1335-1345
62. Yamasaki T. Localized rheological weakening by grain-size reduction during lithospheric extension. Tectonophysics 386 3-4 (2004) 117-145
63. Zhilyaev A.P., Kim B.-K., Szpunar J.A., Baro M.D., and Langdon T.G. The microstructural characteristics of ultrafine-grained nickel. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing 391 1-2 (2005) 377-389