Cycle optimization and combustion analysis in a low-NOX micro-gas turbine

Proceedings of the ASME Turbo Expo

Volumn 4, Issue , 2006, Pages 53-64

  Cameretti, Maria Cristina ^a   Reale, Fabrizio ^a   Tuccillo, Raffaele ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CFD SIMULATION; COMBUSTION ANALYSIS; CYCLE OPTIMIZATION; MICROGAS TURBINES;

COMBUSTION; COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; FLUE GASES; GAS TURBINE POWER PLANTS; NITROGEN OXIDES; THERMODYNAMICS;

GAS TURBINES;

EID: 33750864515     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2006-90240     Document Type: Conference Paper

References (36)

1. Cameretti, M.C., and Tuccillo, R, 2004, "Comparing Different Solutions for the Micro-GasTurbine Combustor", ASME paper GT 2004-GT-53286.
2. Bozza, F., and Tuccillo, R, 2004, "Transient Operation Analysis of a Cogenerating Micro-Gas Turbine, ASME paper ESDA-2004-58079.
3. Bozza, F., Cameretti, M.C., and Tuccillo, R, 2005, "Adapting the Micro-Gas Turbine Operation to Variable Thermal and Electrical Requirements", ASME Jrnl. Of Gas Turbines and Power, vol. 127, pp. 514-524.
4. Cameretti M.C., Tuccillo R., 2005,. "A CFD Based Off-Design Study Of Micro-Gas Turbines Combustors". Atti del GT2005, ASME-IGTI Turbo-Expo 2005. ASME paper GT-2005-68924.
5. Tuccillo R., Cameretti, M.C., 2005, "Combustion And Combustors for MGT Applications", VKI/LS on "Micro Gas Turbines", RTO-MP-AVT-131.
6. Tuccillo, R., 2005, "Performance and Transient Behaviour of MTG based Energy Systems", VKI/LS on "Micro Gas Turbines", RTO-MP-AVT-131.
7. Amsden A.A., 1997, "KIVA-III v: Block structured KIVA program Engine with vertical or canted valves", LA - Los Angeles 13313 - MS, Los Alamos.
8. Nicol, G.D., Malte, P.C., Hamer, A.J., Roby, R.J., and Steele, R.C., 1998,"A Five-Step Global Methane Oxidation - NO Formation Mechanism for Lean Premixed Gas Turbine Combustione," ASME paper 98-GT-185.
9. Miller, J.A., and Bowman C.T., 1989, in Prog. in Energy and Combustion Science 15:287.
10. th. Symposium on Combustion, The Combustion Institute, Pittsburgh.
11. Zel'dovich, Y.B., Sadovnikov, P.Y., Frank-Kamenetskik, D.A., 1947, "Oxidation of Nitrogen in Combustion," Academy of Science of SR, Institute of Chemical Physics, Moscow-Leningrad.
12. Talpallikar, M.V.,Smith, C.E., Lai, M.C., and Holdeman, J.D., 1992, "CFD Analysis of Jet Mixing in Low NOx Flametube Combustors," Journal of Engineering for Gas Turbines and Power, vol. 114, pp.416-424.
13. Spadaccini, L.J., and TeVelde, L.J., 1982, "Autoignition Characteristics of Aircraft Type Fuels", Comb. & Flame, 46:283-300.
14. Li, S.C. and Williams, F.A, 2000, "Reaction Mechanism for Methane Ignition", ASME paper no. 2000-GT-145
15. Roy, C.J., Moran, A.J., and Thomas, G.O., 2001, "Autoignition Characteristics of Gaseous Fuels at Representative Gas Turbine Conditions", ASME paper no. 2001-GT-0051
16. Eggels, R.L.G.M., 2001,"Modelling of NOx Formation of a Premixed DLE Gas Turbine Combustor", ASME paper no. 2001-GT-0069
17. Bozza, F., Cameretti, M.C., Tuccillo, R., 2002, "The Employment of Hydrogenated Fuels from Natural Gas Reforming: Gas Turbine and Combustion Analysis", ASME Jrnl. of Engineering for Gas Turbines and Power, Jan. 2004.
18. Croce, G., Mori G., and Parente, J, 2003, "Assessment of traditional and flamelets models for micro turbine combustion chamber optimisation", ASME paper GT-2003-38385
19. O.Ibrahim, P.Zimmermann, C. Hirsch, T. Sattelmayer, B. Gerhard, C. Steinbach, 2004, "A microturbine operating with variable heat output", ASME paper GT-2004-53011
20. Davison, C.R., Birk, A. M., 2004, " Steady State and Transient Modeling of a Micro-Turbine With Comparison to Operating Engine", ASME paper GT-2004-53378
21. Turrell, M. D., Stopfod, P. J., Syed, K. J., Buchanan, E., 2004, "CFD Simulation of the Flow Within and Downstream of a High-Swirl Lean Premixed Gas Turbine Combustor" ", ASME paper GT-2004- 53112
22. Duwig, C., Fuchs, L., 2004, "Study of a Gas Turbine Combustion Chamber: Influence of the Mixing on the Flame Dynamics", ASME paper GT-2004-53276
23. Koutsenko, I. G., Onegin, S. F., Sipatov, A. M., 2004, "Application of CFD-Based Analysis Technique for Design and Optimization of Gas Turbine Combustors", ASME paper GT-2004-53398
24. Parente J. Mori, G., Anisimov, V. and Croce, G., "Micro Gas Turbine Combustion Chamber Design and CFD Analysis", ASME paper GT2004-54247
25. Traverso, A., Calzolari, F., and Massardo, A.F., 2003, "Transient Analysis and Control System for Advanced Cycles Based on Micro Gas Turbine Technology", ASME paper GT-2003-38269
26. Mongia, C., Held, T., Hsiao, G., Pandalai, R., 'Challenges and Progress in Controlling Dynamics in Gas Turbine Combustors', Journal of Propulsion and Power Vol. 19 No. 5, 2003, pp. 822-829.
27. Peters, N., 2000, "Turbulent Combustion", Cambridge University Press.
28. Me Bride, B.J., and Gordon, S., 1994, "Computer Program for Calculation of Complex Equilibrium Composition and Applications", NASA RP 1311, parts I and II.
29. Gunnar Lagerström, M.Sc, Max Xie, 2002, "High Performance & Cost Effective Recuperator for Micro-Gas Turbines", ASME paper no.GT-2002-30402
30. Proeschel, R. A., 2002, "Proe 90™ Recuperator for Micro-Turbine Applications", ASME paper no.GT-2002-30406
31. Kenjiro Takase and Hideo Furukawa, Kimiaki Nakano, 2002, "A Preliminary Study of An Inter-Cooled and Recuperative Microgasturbine below 300 kW", ASME paper no. GT-2002-30403
32. Chae Hoon Sohn, Han Chang Cho,2005 "Numerical Analysis Of Combustion Instabilty And Its Suppression In Gas Turbine Combustor With Swirlers Modeled On Ev Premix Burners", ASME paper no. GT2005-68162
33. Levy, Y., Sherbaum, V., Erenburg, V., 2005 "Fundamentals Of Low-NOx Gas Turbine Adiabatic Combustor", ASME paper no. GT2005-68321
34. Camporeale S., Casalini, F., Saponaro, A., 2003, "Mild Combustion In A Novel Ccgt Cycle With Partial Flue Gas Recirculation", ASME paper no. GT2003-38743
35. Vazl, C.D., Borges, A.R.J., Van Buijtenen, J., Spliethoffl, H., 2004, "On the stability range of a cylindrical combustor For operation in the flox regime", ASME paper no. GT2004-53790
36. Kalb R.J., Sattelmayer, T., 2004, "Lean blowout limit and nox-production of a premixed sub-ppm nox Burner with periodic flue gas recirculation", ASME paper no. GT2004-53410