Comparing different solutions for the micro-gas turbine combustor

Proceedings of the ASME Turbo Expo 2004

Volumn 1, Issue , 2004, Pages 137-152

  Cameretti, Maria Cristina ^a   Tuccillo, Raffaele ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTORS; FUEL BURNERS; IGNITION; INTAKE SYSTEMS; MIXTURES; TEMPERATURE DISTRIBUTION; VARIATIONAL TECHNIQUES;

ANNULAR COMBUSTORS; INLET AIR CONDITIONS; MICRO-GAS TURBINE COMBUSTOR; SELF-IGNITION;

GAS TURBINES;

EID: 10244226782     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53286     Document Type: Conference Paper

References (35)

1. Rodgers, C, 2000, "25-5 kWe MicroturbineDesign Aspects", ASME paper no. 2000-GT-0626.
2. B.J.P. Buhre, J. Andries, 2000, "Biomass-based, Small-scale, Distributed Generation of Electricity and Heat Using Integrated Gas Turbine- Fuel Cell Systems" ASME paper no. 2000-GT-0022
3. Yoichiro Ohkubo, et al., 2001, "Development of Dry Low-NOx Combustor for 300 kW Class Gas Turbine Applied to Cogeneration System", ASME paper no. 2001-GT-0083
4. Gunnar Lagerström, M.Sc, Max Xie, 2002, "High Performance & Cost Effective Recuperator for Micro-Gas Turbines", ASME paper no.GT-2002-30402
5. Kenjiro Takase and Hideo Furukawa, Kimiaki Nakano, 2002, "A Preliminary Study of An Inter-Cooled and Recuperative Microgasturbine below 300 kW", ASME paper no. GT-2002-30403
6. Fantozzi, F., Di Maria, F., Desideri, U., 2002, "Integrated Micro-Turbine and Rotary-Kiln Pyrolysis System as a Waste to Energy Solution for a Small Town in Central Italy - Cost Positioning and Global Warming Assessment -", ASME paper no.GT-2002-30652
7. ™ Recuperator for Micro-Turbine Applications", ASME paper no.GT-2002-30406
8. Tolpadi, Anil K., Prakash, C., Hura, H., and., Mongia, H.C., 1998," Advanced Combustion Code: Overall Description Prediction of a Jet diffusion Flame and Combustor Flowfields," ASME paper 98-GT-229.
9. Micklow G.J., Roychoudhury S., Nguyen H.L., and Cline M.C., 1993, "Emissions Reduction by Varying the Swirler Airflow Split in Advanced Gas Turbine Combustors", ASME Jrnl of Engrg for Gas Turbines and Paw., vol.115, pp.563-569.
10. Diers, O., Koopman, J., Fischer, M., Hassa C., 2001, "Investigation of two advanced cooling mixing concepts for a rich quench lean combustor", ASME paper GT-2001-0085.
11. Anacleto, P., Heitor, M.V., Moreira, L.N., 1996, "The mean and turbulent flowfields in a model RQL gas-turbine combustor", Experiments in Fluids 22(1996) 153-164.
12. Price, G.R., Botros, K.K., and Goldin, G.M., 2000, "CFD Predictions and Field Measurements from LM1600 Gas Turbine during Part Load Operation, " ASME paper 2000-GT-350.
13. Amsden A.A., 1997, "KIVA-III v: Block structure KIVA program Engine with vertical or canted valves", LA - Los Angeles 13313 - MS, Los Alamos.
14. Nicol, G.D., Malte, P.C., Hamer, A.J, Roby, R.J., and Steele, R.C., 1998,"A Five-Step Global Methane Oxidation -NO Formation Mechanism for Lean Premixed Gas Turbine Combustione," ASME paper 98-GT-185.
15. Miller, J.A., and Bowman C.T., 1989, in Prog. in Energy and Combustion Science 15:287.
16. th. Symposium on Combustion, The Combustion Institute, Pittsburgh.
17. Zel'dovich, Y.B., Sadovnikov, P.Y., Frank-Kamenetskik, D.A., 1947, "Oxidation of Nitrogen in Combustion," Academy of Science of SR, Institute of Chemical Physics, Moscow-Leningrad.
18. Crocker, D.S., Nickolaus, D., and Smith, C.E., 1998, "CFD Modeling of a Gas Turbine Combustor from Compressor Exit to Turbine Inlet," ASME paper 98-GT-184.
19. McGuirk, J.J., and Spencer, A., 2000, "Coupled and Uncoupled CFD Prediction of the Characteristics of Jets From Combustor Air Admission Ports," ASME paper 2000-GT-0125.
20. Talpallikar, M.V., Smith, C.E., Lai, M.C., and Holdeman, J.D., 1992, "CFD Analysis of Jet Mixing in Low NOx Flametube Combustors," Journal of Engineering for Gas Turbines and Power, vol. 114, pp. 416-424.
21. Spadaccini, L.J., and TeVelde, L.J., 1982, "Autoignition Characteristics of Aircraft Type Fuels", Comb. & Flame, 46:283-300.
22. Li, S.C. and Williams, F.A, 2000, "Reaction Mechanism for Methane Ignition", ASME paper no. 2000-GT-145
23. Roy, C.J., Moran, A.J., and Thomas, G.O., 2001, "Autoignition Characteristics of Gaseous Fuels at Representative Gas Turbine Conditions", ASME paper no. 2001-GT-0051
24. Malecki, R.E., et al., 2001, "Application of an Advanced CFD-Based Analysis System to the PW6000 Combustor to Optimize Exit Temperature Distribution. Part A", ASME paper no. 2001-GT-0062
25. Snyder, T.S., et al., 2001, "Application of a Advanced CFD-Based Analysis System to the PW6000 Combustor to Optimize Exit Temperature Distribution. Part B", ASME paper no. 2001-GT-0063
26. Sivaramakrishna, G., et al., 2001, "CFD Modeling of the Aero Gas Turbine Combustor", ASME paper no. 2001-GT-0063
27. Eggels, R.L.G.M., 2001,"Modelling of NOx Formation of a Premixed DLE Gas Turbine Combustor", ASME paper no. 2001-GT-0069
28. Eggels, R.L.G.M., and Brown, C.T., 2001,"Comparison of Numerical and Experimental Results of a Premixed DLE Gas Turbine Combustor", ASME paper no. 2001-GT-0065
29. Bozza, F., Cameretti, M.C., Tuccillo, R., 2002, "Performance Prediction and Combustion Modelling of Low-CO2 Emission Gas Turbines", ASME paper no. 2001-GT-0066
30. Bozza, F., Cameretti, M.C., Marro, A., and Tuccillo, R., 2000, "Performance and emission analysis of a variable load operated gas turbine," in Advanced Energy Systems, vol. 40, pp. 400-415, ed. ASME.
31. Bozza, F., Cameretti, M.C., Tuccillo, R., 2002, "The Employment of Hydrogenated Fuels from Natural Gas Reforming: Gas Turbine and Combustion Analysis" ASME paper GT-2002-30414, scheduled for publication in ASME Jrnl. of Engineering for Gas Turbines and Power, Jan. 2004.
32. Bozza, F., Cameretti, M.C., and Tuccillo, R, 2003, "Adapting the Micro-Gas Turbine Operation to Variable Thermal and Electrical Requirements", ASME paper GT 2003-GT-38652, to be published in ASME Transactions.
33. th. ILASS Europe Conference, pp. TV.3.I - IV.3.VI, ed. Technical University of Darmstadt.
34. Croce, G., Mori G., and Parente, J, 2003, "Assessment of traditional and flamelets models for micro turbine combustion chamber optimisation", ASME paper GT-2003-38385
35. Liedtke, O., Schulz, A., and Wittig, S., 2002 "Design study of a lean premixed prevaporized counter flow combustion for a micro gas turbine", ASME paper GT-2002-30074