Microstructure and cleanability of uncoated and fluoropolymer, zirconia and titania coated ceramic glazed surfaces

Journal of the European Ceramic Society

Volumn 27, Issue 1, 2007, Pages 101-108

  Kuisma, Risto ^a   Fröberg, Linda ^b   Kymäläinen, Hanna Riitta ^a   Pesonen Leinonen, Eija ^a   Piispanen, Minna ^b   Melamies, Pauliina ^a   Hautala, Mikko ^a   Sjöberg, Anna Maija ^a   Hupa, Leena ^b  

^a UNIVERSITY OF HELSINKI   (Finland)

^b ÅBO AKADEMI UNIVERSITY   (Finland)

Author keywords

Chemical properties; Cleanability; Coatings; Surfaces; Tiles

Indexed keywords

COLORIMETRY; CONTACT ANGLE; ELECTRON MICROSCOPY; FLUORINE CONTAINING POLYMERS; GLAZES; PROFILOMETRY; SURFACE PROPERTIES; SURFACE ROUGHNESS; TILE; TITANIUM DIOXIDE; ZIRCONIA;

CERAMIC GLAZED SURFACES; CLEANABILITY; TITANIA;

CERAMIC COATINGS;

CERAMIC COATINGS; COLORIMETRY; CONTACT ANGLE; ELECTRON MICROSCOPY; FLUORINE CONTAINING POLYMERS; GLAZES; PROFILOMETRY; SURFACE PROPERTIES; SURFACE ROUGHNESS; TILE; TITANIUM DIOXIDE; ZIRCONIA;

EID: 33750521212     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2006.02.035     Document Type: Article

References (27)

1. Lawrence J., Li L., and Spencer J.T. A two-stage ceramic tile grout sealing process using a high power diode laser. II. Mechanical, chemical and physical properties. Opt. Laser Technol. 30 3-4 (1998) 215-223
2. Romero M., Ma J., Rincón A., and Acosta A. Crystallisation of a zirconium-based glaze for ceramic tile coatings. J. Eur. Ceram. Soc. 23 (2003) 1629-1635
3. Torres F.J., and Alarcón J. Pyroxene-based glass-ceramics as glazes for floor tiles. J. Eur. Ceram. Soc. 25 (2005) 349-355
4. Hupa L., Bergman R., Fröberg L., Vane-Tempest S., Hupa M., Kronberg T., et al. Chemical resistance and cleanability of glazed surfaces. Surf. Sci. 584 1 (2005) 113-118
5. Cutler W.G., and Kissa E. Detergency, Theory and Technology (1987), Marcel Dekker, New York
6. ASTM D 5343-97, Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners, 1997.
7. EN ISO 10545-14, Ceramic tiles. Part 14. Determination of resistance to stains, 2000.
8. Taylor J.H., and Holah J.T. A comparative evaluation with respect to the bacterial cleanability of a range of wall and floor surface materials used in the food industry. J. Appl. Bacteriol. 81 3 (1996) 262-266
9. Kemppainen M., Lahtinen S.T., Suontamo T., Alen R., and Sjöberg A.-M. Cleanability of ceramic tile grout materials. Tenside Surfact. Deterg. 39 (2002) 8-11
10. Dondi M., Ercolani G., Guarini G., Melandri C., Raimondo M., Rocha e Almendra E., et al. The role of surface microstructure on the resistance to stains of porcelain stoneware tiles. J. Eur. Ceram. Soc. 25 (2005) 357-365
11. Tenorio Cavalcante P.M., Dondi M., Ercolani G., Guarini G., Melandri C., Raimondo M., et al. The influence of microstructure on the performance of white porcelain stoneware. Ceram. Int. 30 (2004) 953-963
12. Esposito L., Tucci A., Rastelli E., Palmonari C., and Selli S. Stain resistance of porcelain stoneware tiles. Am. Ceram. Soc. Bull. 81 10 (2002) 38-42
13. Fröberg, L., Kronberg, T., Hupa, L. and Hupa, M., Influence of firing parameters on phase composition of raw glazes, J. Eur. Ceram. Soc., submitted for publication.
14. Pesonen-Leinonen E., Redsven I., Neuvonen P., Hurme K.-R., Pääkkö M., Koponen H.-K., Pakkanen T.T., Uusi-Rauva A., Hautala M., and Sjöberg A.-M. Determination of soil adhesion to plastic surfaces using a radioactive tracer. Appl. Radiat. Isot. 64 2 (2006) 163-169
15. Verran J., Rowe D.L., and Boyd R.D. The use of the atomic force microscope to visualise and measure wear of food contact surfaces. Int. Biodeterior. Biodegrad. 46 2 (2000) 99-105
16. Flint S.H., Bremer P.J., and Brooks J.D. Biofilms in dairy manufacturing, plantsdescription, current concerns and methods of control. Biofouling 11 (1997) 81-97
17. Liu W., Chen Y., Ye C., and Zhang P. Preparation and characterization of doped solgel zirconia films. Ceram. Int. 28 (2002) 349-354
18. Barrow D.A., Petroff T.E., and Sayer M. Thick ceramic coatings using a sol gel based ceramic 0-3 composite. Surf. Coat. Technol. 76-77 (1995) 113-118
19. Krüssmann, H. and Garvens, H., Ermittlung der Reinigungsfähigkeit von elastischen Bodenbelägen über die Charakterisierung ihrer Oberflächeneigenschaften mit dem Ziel einer Erleichterung der Auswahl optimaler Reinigungs-und Pflegeverfahren. AiFForschungsvorhaben Nr. 10001, wfk-Forschungsinstitut für Reinigungs-technologie e.V., 1997.
20. Anton D. Surface-fluorinated coatings. Adv. Mater. 10 15 (1998) 1197-1205
21. Kung H.H., and Ko E.I. Preparation of oxide catalysts and catalyst supports- a review of recent advances. Chem. Eng. J. 64 (1996) 203-214
22. Bond G.C. Preparation and properties of vanadia/titania monolayer catalysts. Appl. Catal. A: Gen. 157 (1997) 91-103
23. Yue Y., Zhao X., Hua W., and Gao Z. Nanosized titania and zirconia as catalysts for hydrolysis of carbon disulfide. Appl. Catal. B: Environ. 46 (2003) 561-572
24. Zou H., and Lin Y.S. Structural and surface chemical properties of sol-gel dervived TiO2-ZrO2 oxides. Appl. Catal. A-Gen. 206 (2004) 35-42
25. Kemmitt T., Al-Salim N.I., Waterland M., Kennedy V.J., and Markwitz A. Photocatalytic titania coatings. Curr. Appl. Phys. 4 (2004) 189-192
26. Chawla M.K. How clean is clean? Measuring surface cleanliness and defining acceptable level of cleanliness. In: Kanegsberg B., and Kanegsberg E. (Eds). Handbook for critical cleaning (2001), CRC Press LLC
27. Della Volpe C., Penati A., Peruzzi R., Siboni S., Toniolo L., and Colombo C. The combined effect of roughness and heterogeneity on contact angles: the case of polymer coating for stone protection. J. Adhes. Sci. Technol. 14 2 (2000) 273-299