-
1
-
-
0000793139
-
Cramming electronics onto integrated circuits
-
Moore, G. E., 1965, "Cramming Electronics onto Integrated Circuits," Electronics, 38(8).
-
(1965)
Electronics
, vol.38
, Issue.8
-
-
Moore, G.E.1
-
4
-
-
0033694119
-
Design for manufacturability of SISE parallel plate forced convection heat sinks
-
Iyengar, M., and Bar-Cohen, A., 2000, "Design for manufacturability of SISE Parallel Plate Forced Convection Heat Sinks," Proceedings of the Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 141-148.
-
(2000)
Proceedings of the Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
, pp. 141-148
-
-
Iyengar, M.1
Bar-Cohen, A.2
-
5
-
-
0141829910
-
Fundemental performance limits of heat sinks
-
Copeland, D. W., 2003, "Fundemental Performance Limits of Heat Sinks," ASME J. Electron. Packag., 125, p. 225.
-
(2003)
ASME J. Electron. Packag.
, vol.125
, pp. 225
-
-
Copeland, D.W.1
-
8
-
-
33845564541
-
New attempt of forced air-cooling for high flux applications
-
Katoh, T., Xu, G., Vogel, M., and Novotny, S., 2004, "New Attempt of Forced Air-Cooling for High Flux Applications," Inter Society Conference on Thermal Phenomena.
-
(2004)
Inter Society Conference on Thermal Phenomena
-
-
Katoh, T.1
Xu, G.2
Vogel, M.3
Novotny, S.4
-
10
-
-
85199294197
-
Air cooling of electronics: A personal perspective 1981-2001
-
San Jose, CA
-
Onega, A., 2002, "Air Cooling of Electronics: A Personal Perspective 1981-2001," 2002 IEEE Semi-Therm Conference, San Jose, CA.
-
(2002)
2002 IEEE Semi-therm Conference
-
-
Onega, A.1
-
11
-
-
85199255758
-
High power microelectronics thermal management and packaging fundamentals
-
Las Vegas, NV
-
You, S. M., and Lee, S., 2004, "High Power Microelectronics Thermal Management and Packaging Fundamentals," ITHERM 2004, Las Vegas, NV.
-
(2004)
ITHERM 2004
-
-
You, S.M.1
Lee, S.2
-
12
-
-
0015050060
-
Heat transfer and friction in tubes with repeated-rib roughness
-
Webb, R. L., Eckert, E. R. G., and Goldstein, R. J., 1971, "Heat Transfer and Friction in Tubes With Repeated-Rib Roughness," Int. J. Heat Mass Transfer, 14, pp. 601-617.
-
(1971)
Int. J. Heat Mass Transfer
, vol.14
, pp. 601-617
-
-
Webb, R.L.1
Eckert, E.R.G.2
Goldstein, R.J.3
-
13
-
-
0014930544
-
Experimental heat transfer and pressure drop with two-dimensional turbulence promoter applied to two opposite walls of a square tube
-
Bergles and Webb, Eds. ASME, New York
-
Burggraf, F., 1970, "Experimental Heat Transfer and Pressure Drop With Two-Dimensional Turbulence Promoter Applied to Two Opposite Walls of a Square Tube," in Augmentation of Convective Heat and Mass Transfer, Bergles and Webb, Eds. ASME, New York, pp. 70-79.
-
(1970)
Augmentation of Convective Heat and Mass Transfer
, pp. 70-79
-
-
Burggraf, F.1
-
14
-
-
0017998361
-
An investigation of heat transfer and friction for rib-roughened surfaces
-
Man, J. C., Glicksman, L. R., and Rohsenow, W. M., 1978, "An Investigation of Heat Transfer and Friction for Rib-Roughened Surfaces," Int. J. Heat Mass Transfer, 21, pp. 1143-1156.
-
(1978)
Int. J. Heat Mass Transfer
, vol.21
, pp. 1143-1156
-
-
Man, J.C.1
Glicksman, L.R.2
Rohsenow, W.M.3
-
15
-
-
0022098335
-
Heat transfer enhancement in channels with turbulence promoters
-
Han, J. C., Park, J. S., and Lei, C. K., 1985, "Heat Transfer Enhancement in Channels With Turbulence Promoters," ASME J. Eng. Gas Turbines Power, 107, pp. 628-635.
-
(1985)
ASME J. Eng. Gas Turbines Power
, vol.107
, pp. 628-635
-
-
Han, J.C.1
Park, J.S.2
Lei, C.K.3
-
16
-
-
0029671705
-
Experimental heat transfer and friction in channels roughened with angled, V-shaped, and discrete ribs on two opposite walls
-
Taslim, M. E., Li, T., and Kercher, D. M., 1996, "Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls," ASME J. Turbomach., 118, pp. 20-28.
-
(1996)
ASME J. Turbomach.
, vol.118
, pp. 20-28
-
-
Taslim, M.E.1
Li, T.2
Kercher, D.M.3
-
17
-
-
0346335578
-
The effect of turbulator lean on heat transfer and friction in a square channel
-
GT2003-38137, Atlanta
-
Bunker, R. S., and Osgood, S. J., 2003, "The Effect of Turbulator Lean on Heat Transfer and Friction in a Square Channel," GT2003-38137, IGTI Turbo Expo, Atlanta.
-
(2003)
IGTI Turbo Expo
-
-
Bunker, R.S.1
Osgood, S.J.2
-
18
-
-
0013637506
-
The effect of periodic ribs on the local aerodynamic and heat transfer performance of a straight cooling channel
-
Rau, G., Cakan, M., Moeller, D., and Arts, T., 1998, "The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling Channel," ASME J. Turbomach., 120, pp. 368-375.
-
(1998)
ASME J. Turbomach.
, vol.120
, pp. 368-375
-
-
Rau, G.1
Cakan, M.2
Moeller, D.3
Arts, T.4
-
19
-
-
84973110433
-
PIV investigation of the flow characteristics in an internal coolant passage with two ducts connected by a sharp 180-deg bend
-
Paper No. 98-GT-544, Stockholm
-
Schabacker, J., Boelcs, A., and Johnson, B. V., 1998, "PIV Investigation of the Flow Characteristics in an Internal Coolant Passage With Two Ducts Connected by a Sharp 180-deg Bend," Paper No. 98-GT-544, IGTI Turbo Expo, Stockholm.
-
(1998)
IGTI Turbo Expo
-
-
Schabacker, J.1
Boelcs, A.2
Johnson, B.V.3
-
20
-
-
0037001019
-
Heat transfer in a complex trailing edge passage for a high pressure turbine blade, part 1: Experimental measurements
-
GT-2002-30212, Amsterdam
-
Bunker, R. S., Wetzel, T. G., and Rigby, D. L., 2002, "Heat Transfer in a Complex Trailing Edge Passage for a High Pressure Turbine Blade, Part 1: Experimental Measurements," GT-2002-30212, IGTI Turbo Expo, Amsterdam.
-
(2002)
IGTI Turbo Expo
-
-
Bunker, R.S.1
Wetzel, T.G.2
Rigby, D.L.3
-
21
-
-
0003766626
-
Experimental heat transfer and friction factors in turbulated cooling passages of different aspect ratios where turbulators are staggered
-
AIAA Pap., Boston
-
Taslim, M. E., and Spring, S. D., 1988, "Experimental Heat Transfer and Friction Factors in Turbulated Cooling Passages of Different Aspect Ratios Where Turbulators are Staggered," AIAA Pap., 24th Joint Propulsion Conference, Boston.
-
(1988)
24th Joint Propulsion Conference
-
-
Taslim, M.E.1
Spring, S.D.2
-
22
-
-
0346965360
-
Heat transfer and friction in channels with very high blockage 45-deg staggered turbulators
-
GT2003-38611, Atlanta
-
Bailey, J. C., and Bunker, R. S., 2003, "Heat Transfer and Friction in Channels With Very High Blockage 45-deg Staggered Turbulators," GT2003-38611, IGTI Turbo Expo, Atlanta.
-
(2003)
IGTI Turbo Expo
-
-
Bailey, J.C.1
Bunker, R.S.2
-
23
-
-
0020310970
-
Pressure loss and heat transfer through multiple rows of short pin fins
-
Munich, Germany
-
Metzger, D. E., Fan, Z. X., and Shepard, W. B., 1982, "Pressure Loss and Heat Transfer Through Multiple Rows of Short Pin Fins," Proceedings of the Seventh International Heat Transfer Conference, Munich, Germany Vol. 3.
-
(1982)
Proceedings of the Seventh International Heat Transfer Conference
, vol.3
-
-
Metzger, D.E.1
Fan, Z.X.2
Shepard, W.B.3
-
24
-
-
0020115458
-
Heat transfer coefficients for staggered arrays of short pin fins
-
VanFossen, G. J., 1982, "Heat Transfer Coefficients for Staggered Arrays of Short Pin Fins," ASME J. Eng. Power, 104, pp. 268-274.
-
(1982)
ASME J. Eng. Power
, vol.104
, pp. 268-274
-
-
VanFossen, G.J.1
-
25
-
-
0018985155
-
Experiments on in-line pin fin arrays and performance comparisons with staggered arrays
-
Sparrow, E. M., Ramsey, J. W., and Altemani, C. A. C., 1980, "Experiments on In-Line Pin Fin Arrays and Performance Comparisons With Staggered Arrays," ASME J. Heat Transfer, 102, pp. 44-50.
-
(1980)
ASME J. Heat Transfer
, vol.102
, pp. 44-50
-
-
Sparrow, E.M.1
Ramsey, J.W.2
Altemani, C.A.C.3
-
26
-
-
0020203278
-
Developing heat transfer in rectangular ducts with staggered arrays of short pin fins
-
Metzger, D. E., Berry, R. A., and Bronson, J. P., 1982, "Developing Heat Transfer in Rectangular Ducts With Staggered Arrays of Short Pin Fins," ASME J. Heat Transfer, 104, pp. 700-706.
-
(1982)
ASME J. Heat Transfer
, vol.104
, pp. 700-706
-
-
Metzger, D.E.1
Berry, R.A.2
Bronson, J.P.3
-
27
-
-
0032840252
-
Heat transfer contributions of pins and endwall in pin-fin arrays: Effects of thermal boundary condition modeling
-
Chyu, M. K., Hsing, Y. C., Shih, T. I. P., and Natarajan, V., 1999, "Heat Transfer Contributions of Pins and Endwall in Pin-Fin Arrays: Effects of Thermal Boundary Condition Modeling," ASME J. Turbomach., 121, pp. 257-263.
-
(1999)
ASME J. Turbomach.
, vol.121
, pp. 257-263
-
-
Chyu, M.K.1
Hsing, Y.C.2
Shih, T.I.P.3
Natarajan, V.4
-
28
-
-
0021199597
-
Effects of pin shape and array orientation on heat transfer and pressure loss in pin fin arrays
-
Metzger, D. E., Fan, C. S., and Haley, S. W., 1984, "Effects of Pin Shape and Array Orientation on Heat Transfer and Pressure Loss in Pin Fin Arrays," ASME J. Eng. Gas Turbines Power, 106, pp. 252-257.
-
(1984)
ASME J. Eng. Gas Turbines Power
, vol.106
, pp. 252-257
-
-
Metzger, D.E.1
Fan, C.S.2
Haley, S.W.3
-
29
-
-
11644323199
-
Convective heat transfer of cubic fin arrays in a narrow channel
-
Chyu, M. K., Hsing, Y. C., and Natarajan, V., 1998, "Convective Heat Transfer of Cubic Fin Arrays in a Narrow Channel," ASME J. Turbomach., 120, pp. 362-367.
-
(1998)
ASME J. Turbomach.
, vol.120
, pp. 362-367
-
-
Chyu, M.K.1
Hsing, Y.C.2
Natarajan, V.3
-
30
-
-
0032817003
-
Heat transfer and pressure drop in pin-fin trapezoidal ducts
-
Hwang, J. J., Lia, D. Y., and Tsia, Y. P., 1999, "Heat Transfer and Pressure Drop in Pin-Fin Trapezoidal Ducts," ASME J. Turbomach., 121, pp. 264-271.
-
(1999)
ASME J. Turbomach.
, vol.121
, pp. 264-271
-
-
Hwang, J.J.1
Lia, D.Y.2
Tsia, Y.P.3
-
31
-
-
0027622533
-
Heat transfer and friction loss performance in flow networks with multiple intersections
-
Zhang, N., Yang, W. I., and Lee, C. P., 1993, "Heat Transfer and Friction Loss Performance in Flow Networks With Multiple Intersections," Exp. Heat Transfer, 6, pp. 243-257.
-
(1993)
Exp. Heat Transfer
, vol.6
, pp. 243-257
-
-
Zhang, N.1
Yang, W.I.2
Lee, C.P.3
-
32
-
-
34548790443
-
In-wall network (Mesh) cooling augmentation for turbine airfoils
-
Paper No. GT2004-54260, Vienna, Austria
-
Bunker, R. S, Bailey, J. C., Lee, C. P., and Stevens, C. W., 2004, "In-Wall Network (Mesh) Cooling Augmentation for Turbine Airfoils," Paper No. GT2004-54260, IGTI Turbo Expo, Vienna, Austria.
-
(2004)
IGTI Turbo Expo
-
-
Bunker, R.S.1
Bailey, J.C.2
Lee, C.P.3
Stevens, C.W.4
-
33
-
-
0016949854
-
Golf ball aerodynamics
-
Bearman, P. W., and Harvey, J. K., 1976, "Golf Ball Aerodynamics," Aeronaut. Q., May, pp. 112-122.
-
(1976)
Aeronaut. Q.
, vol.MAY
, pp. 112-122
-
-
Bearman, P.W.1
Harvey, J.K.2
-
35
-
-
0027886258
-
Thermohydraulics of flow over isolated depressions (Pits, Grooves) in a smooth wall
-
Afanas'yev, V. N., Veselkin, Yu. V., Leont'ev, A. I., Skibin, A. P., and Chudnovskiy, Ya. P., 1993, "Thermohydraulics of Flow Over Isolated Depressions (Pits, Grooves) in a Smooth Wall," Heat Transfer-Sov. Res., 25(1), pp. 22-56.
-
(1993)
Heat Transfer-Sov. Res.
, vol.25
, Issue.1
, pp. 22-56
-
-
Afanas'yev, V.N.1
Veselkin, Yu.V.2
Leont'ev, A.I.3
Skibin, A.P.4
Chudnovskiy, Ya.P.5
-
36
-
-
0027745198
-
Convective heat transfer in turbulized flow past a hemispherical cavity
-
Kesarev, V. S., and Kozlov, A. P., 1993, "Convective Heat Transfer in Turbulized Flow Past a Hemispherical Cavity," Heat Transfer-Sov. Res., 25, pp. 156-160.
-
(1993)
Heat Transfer-sov. Res.
, vol.25
, pp. 156-160
-
-
Kesarev, V.S.1
Kozlov, A.P.2
-
37
-
-
0040899381
-
Heat transfer and friction on surfaces contoured by spherical depressions
-
Afanas'yev, V. N., and Chudnovskiy, Ya. P., 1992, "Heat Transfer and Friction on Surfaces Contoured by Spherical Depressions," Heat Transfer-Sov. Res., 24, pp. 24-104.
-
(1992)
Heat Transfer-sov. Res.
, vol.24
, pp. 24-104
-
-
Afanas'yev, V.N.1
Chudnovskiy, Ya.P.2
-
38
-
-
0027628075
-
Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate
-
Afanas'yev, V. N., Chudnovskiy, Ya. P., Chudnovskiy, Ya. P., Leont'ev, A. I., and Roganov, P. S., 1993, "Turbulent Flow Friction and Heat Transfer Characteristics for Spherical Cavities on a Flat Plate," Exp, Therm. Fluid Sci., 7, pp. 1-8.
-
(1993)
Exp, Therm. Fluid Sci.
, vol.7
, pp. 1-8
-
-
Afanas'yev, V.N.1
Chudnovskiy, Ya.P.2
Chudnovskiy, Ya.P.3
Leont'ev, A.I.4
Roganov, P.S.5
-
39
-
-
0347842718
-
Experimental study of the thermal and hydraulic characteristics of heat transfer surfaces formed by spherical cavities
-
Belen'kiy, M. Ya., Gotovskii, M. A., Lekakh, B. M., Fokin, B. S., and Khabenskii, V. B., 1992, "Experimental Study of the Thermal and Hydraulic Characteristics of Heat Transfer Surfaces Formed by Spherical Cavities," Teplofiz. Vys. Temp., 29(6), pp. 1142-1147.
-
(1992)
Teplofiz. Vys. Temp.
, vol.29
, Issue.6
, pp. 1142-1147
-
-
Belen'kiy, M.Y.1
Gotovskii, M.A.2
Lekakh, B.M.3
Fokin, B.S.4
Khabenskii, V.B.5
-
40
-
-
0027711211
-
Heat transfer augmentation using surfaces formed by a system of spherical cavities
-
Belen'kiy, M. Ya., Gotovskii, M. A., Lekakh, B. M., Fokin, B. S., and Dolgushin, K. S., 1993, "Heat Transfer Augmentation Using Surfaces Formed by a System of Spherical Cavities," Heat Transfer-Sov. Res., 25, pp. 196-202.
-
(1993)
Heat Transfer-sov. Res.
, vol.25
, pp. 196-202
-
-
Belen'kiy, M.Y.1
Gotovskii, M.A.2
Lekakh, B.M.3
Fokin, B.S.4
Dolgushin, K.S.5
-
41
-
-
84973636429
-
Concavity enhanced heat transfer in an internal cooling passage
-
Paper No. 97-GT-437, Orlando
-
Chyu, M. K., Yu, Y., Ding, H., Downs, J. P., and Soechting, F. O., 1997, "Concavity Enhanced Heat Transfer in an Internal Cooling Passage," IGTI Turbo Expo, Paper No. 97-GT-437, Orlando.
-
(1997)
IGTI Turbo Expo
-
-
Chyu, M.K.1
Yu, Y.2
Ding, H.3
Downs, J.P.4
Soechting, F.O.5
-
42
-
-
84928471458
-
Channel height effect on heat transfer and friction in a dimpled passage
-
Paper No. 99-GT-163, Indianapolis
-
Moon, H. K., O'Connell, T., and Glezer, B., 1999, "Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage," IGTI Turbo Expo, Paper No. 99-GT-163, Indianapolis.
-
(1999)
IGTI Turbo Expo
-
-
Moon, H.K.1
O'Connell, T.2
Glezer, B.3
-
43
-
-
84955056394
-
Local heat transfer and flow structure on and above a dimpled surface in a channel
-
Paper No. 2000-GT-230, Munich
-
Mahmood, G. I., Hill, M. L., Nelson, D. L., Ligrani, P. M., Moon, H. K., and Glezer, B., 2000, "Local Heat Transfer and Flow Structure on and Above a Dimpled Surface in a Channel," IGTI Turbo Expo, Paper No. 2000-GT-230, Munich.
-
(2000)
IGTI Turbo Expo
-
-
Mahmood, G.I.1
Hill, M.L.2
Nelson, D.L.3
Ligrani, P.M.4
Moon, H.K.5
Glezer, B.6
-
45
-
-
1642456589
-
Heat transfer and friction factors for flows inside circular tubes with concavity surfaces
-
Bunker, R. S., and Donnellan, K., 2003, "Heat Transfer and Friction Factors for Flows Inside Circular Tubes With Concavity Surfaces," ASME J. Turbomach., 125, pp. 665-672.
-
(2003)
ASME J. Turbomach.
, vol.125
, pp. 665-672
-
-
Bunker, R.S.1
Donnellan, K.2
-
46
-
-
16244398622
-
Heat transfer and pressure loss for flows inside converging and diverging channels with surface concavity shape effects
-
Crete Island, Greece, Sep. 29 - Oct. 3, Begell House Inc., New York
-
Bunker, R., Gotovskii, M., Belen'kiy, M., and Fokin, B., 2003, "Heat Transfer and Pressure Loss for Flows Inside Converging and Diverging Channels With Surface Concavity Shape Effects," Proceedings 4th International Conference on Compact Heat Exchangers and Enhancement Technology, Crete Island, Greece, Sep. 29 - Oct. 3, Begell House Inc., New York.
-
(2003)
Proceedings 4th International Conference on Compact Heat Exchangers and Enhancement Technology
-
-
Bunker, R.1
Gotovskii, M.2
Belen'kiy, M.3
Fokin, B.4
-
47
-
-
33645378936
-
The investigation of heat transfer in cooled blades of gas turbines
-
AIAA J.
-
Goreloff, V., Ooychengerg, M., and Malkoff, V., 1990, "The Investigation of Heat Transfer in Cooled Blades of Gas Turbines," 26th Joint Propulsion Conference, AIAA J.
-
(1990)
26th Joint Propulsion Conference
-
-
Goreloff, V.1
Ooychengerg, M.2
Malkoff, V.3
-
48
-
-
10244249241
-
Latticework (vortex) cooling effectiveness part 1: Stationary channel experiments
-
Paper No. GT2004-54157, Vienna, Austria
-
Bunker, R. S., 2004, "Latticework (Vortex) Cooling Effectiveness Part 1: Stationary Channel Experiments," Paper No. GT2004-54157, IGTI Turbo Expo, Vienna, Austria.
-
(2004)
IGTI Turbo Expo
-
-
Bunker, R.S.1
-
49
-
-
34548506954
-
Heat and mass transfer between impinging gas jets and solid surfaces
-
Academic Press, New York
-
Martin, H., 1977, "Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces," Advances in Heat Transfer, Academic Press, New York, 13, pp. 1-60.
-
(1977)
Advances in Heat Transfer
, vol.13
, pp. 1-60
-
-
Martin, H.1
-
50
-
-
0034953282
-
Jet impingement heat transfer in gas turbine systems
-
Han, B., and Goldstein, R. J., 2001, "Jet Impingement Heat Transfer in Gas Turbine Systems," Ann. N.Y. Acad. Sci., 934, pp. 147-161.
-
(2001)
Ann. N.Y. Acad. Sci.
, vol.934
, pp. 147-161
-
-
Han, B.1
Goldstein, R.J.2
-
51
-
-
0001939162
-
Heat transfer between a flat plate and jets of air impinging on it
-
International Developments in Heat Transfer, ASME, New York
-
Gardon, R., and Cobonpue, J., 1962, "Heat Transfer Between a Flat Plate and Jets of Air Impinging on it," International Developments in Heat Transfer, Proceedings of the 2nd International Heat Transfer Conference, ASME, New York, pp. 454-460.
-
(1962)
Proceedings of the 2nd International Heat Transfer Conference
, pp. 454-460
-
-
Gardon, R.1
Cobonpue, J.2
-
52
-
-
85024508592
-
Heat transfer characteristics of impinging two-dimensional air jets
-
Gardon, R., and Akfirat, J., 1966, "Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets," ASME J. Heat Transfer, 88, pp. 101-108.
-
(1966)
ASME J. Heat Transfer
, vol.88
, pp. 101-108
-
-
Gardon, R.1
Akfirat, J.2
-
53
-
-
0000208194
-
Heat transfer by convection from a hot gas jet to a plane surface
-
Perry, K. P., 1954, "Heat Transfer by Convection From a Hot Gas Jet to a Plane Surface," Proc. Inst. Mech. Eng., 168, pp. 775-784.
-
(1954)
Proc. Inst. Mech. Eng.
, vol.168
, pp. 775-784
-
-
Perry, K.P.1
-
54
-
-
0029159192
-
Heat transfer and flow characteristics of an oblique turbulent impinging jet within confined walls
-
Ichimiya, K., 1995, "Heat Transfer and Flow Characteristics of an Oblique Turbulent Impinging Jet Within Confined Walls," ASME J. Heat Transfer, 117, pp. 316-322.
-
(1995)
ASME J. Heat Transfer
, vol.117
, pp. 316-322
-
-
Ichimiya, K.1
-
55
-
-
85024540416
-
Impingement cooling of concave surfaces with lines of circular air jets
-
Metzger, D., Yamashita, T., and Jenkins, C., 1971, "Impingement Cooling of Concave Surfaces With Lines of Circular Air Jets," ASME J. Eng. Power, 91, pp. 149-158.
-
(1971)
ASME J. Eng. Power
, vol.91
, pp. 149-158
-
-
Metzger, D.1
Yamashita, T.2
Jenkins, C.3
-
56
-
-
85003365446
-
Evaluation of internal heat-transfer coefficients for impingement-cooled turbine airfoils
-
Chupp, R., Helms, H., McFadden, P., and Brown, T., 1969, "Evaluation of Internal Heat-Transfer Coefficients for Impingement-Cooled Turbine Airfoils," J. Aircr., 6(3), pp. 203-208.
-
(1969)
J. Aircr.
, vol.6
, Issue.3
, pp. 203-208
-
-
Chupp, R.1
Helms, H.2
McFadden, P.3
Brown, T.4
-
57
-
-
0025460721
-
Local heat transfer in internally cooled turbine airfoil leading edge regions: Part I - Impingement cooling without film coolant extraction
-
Bunker, R., and Metzger, D., 1990, "Local Heat Transfer in Internally Cooled Turbine Airfoil Leading Edge Regions: Part I - Impingement Cooling Without Film Coolant Extraction," ASME J. Turbomach., 112, pp. 451-458.
-
(1990)
ASME J. Turbomach.
, vol.112
, pp. 451-458
-
-
Bunker, R.1
Metzger, D.2
-
58
-
-
0015285588
-
Effects of crossflow on impingement heat transfer
-
Metzger, D., and Korstad, R., 1972, "Effects of Crossflow on Impingement Heat Transfer," ASME J. Eng. Power, 94, pp. 35-41.
-
(1972)
ASME J. Eng. Power
, vol.94
, pp. 35-41
-
-
Metzger, D.1
Korstad, R.2
-
59
-
-
13644256086
-
Experimental and numerical study of heat transfer in a gas turbine combustor liner
-
Bailey, J. C., Intile, J., Tolpadi, A., Fric, T., Nirmalan, N. V., and Bunker, R. S., 2002, "Experimental and Numerical Study of Heat Transfer in a Gas Turbine Combustor Liner," ASME J. Eng. Gas Turbines Power, 125, pp. 994-1002.
-
(2002)
ASME J. Eng. Gas Turbines Power
, vol.125
, pp. 994-1002
-
-
Bailey, J.C.1
Intile, J.2
Tolpadi, A.3
Fric, T.4
Nirmalan, N.V.5
Bunker, R.S.6
-
60
-
-
84970871114
-
Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air
-
Kercher, D., and Tabakoff, W., 1970, "Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air," ASME J. Eng. Power, 92, pp. 73-82.
-
(1970)
ASME J. Eng. Power
, vol.92
, pp. 73-82
-
-
Kercher, D.1
Tabakoff, W.2
-
61
-
-
0019563206
-
Streamwise flow and heat transfer distributions for jet array impingement with crossflow
-
Florschuetz, L., Truman, C., and Metzger, D., 1981, "Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow," ASME J. Heat Transfer, 103, pp. 337-342.
-
(1981)
ASME J. Heat Transfer
, vol.103
, pp. 337-342
-
-
Florschuetz, L.1
Truman, C.2
Metzger, D.3
-
62
-
-
0018983693
-
Periodic streamwise variations of heat transfer coefficients for inline and staggered arrays of circular jets with crossflow of spent air
-
Florschuetz, L., Berry, R., and Metzger, D., 1980, "Periodic Streamwise Variations of Heat Transfer Coefficients for Inline and Staggered Arrays of Circular Jets With Crossflow of Spent Air," ASME J. Heat Transfer, 102, pp. 132-137.
-
(1980)
ASME J. Heat Transfer
, vol.102
, pp. 132-137
-
-
Florschuetz, L.1
Berry, R.2
Metzger, D.3
-
63
-
-
0021374864
-
Heat transfer characteristics for jet array impingement with initial crossflow
-
Florschuetz, L., Metzger, D., and Su, C., 1984, "Heat Transfer Characteristics for Jet Array Impingement With Initial Crossflow," ASME J. Heat Transfer, 106, pp. 34-41.
-
(1984)
ASME J. Heat Transfer
, vol.106
, pp. 34-41
-
-
Florschuetz, L.1
Metzger, D.2
Su, C.3
-
64
-
-
0023437617
-
Full coverage impingement heat transfer: Influence of the number of holes
-
Andrews, G. E., Durance, J., Hussain, G. I., and Ojobor, S. N., 1987, "Full Coverage Impingement Heat Transfer: Influence of the Number of Holes," ASME J. Turbomach., 109, pp. 557-563.
-
(1987)
ASME J. Turbomach.
, vol.109
, pp. 557-563
-
-
Andrews, G.E.1
Durance, J.2
Hussain, G.I.3
Ojobor, S.N.4
-
65
-
-
0036994213
-
Local heat transfer and flow distributions for impinging jet arrays of both sparse and dense extent
-
GT-2002-30473, Amsterdam
-
Bailey, J. C., and Bunker, R. S., 2002, "Local Heat Transfer and Flow Distributions for Impinging Jet Arrays of Both Sparse and Dense Extent," GT-2002-30473, IGTI Turbo Expo, Amsterdam.
-
(2002)
IGTI Turbo Expo
-
-
Bailey, J.C.1
Bunker, R.S.2
-
66
-
-
0034864192
-
An experimental evaluation of advanced leading edge impingement cooling concepts
-
Taslim, M. E., Setayeshgar, L., and Spring, S. D., 2001, "An Experimental Evaluation of Advanced Leading Edge Impingement Cooling Concepts," ASME J. Turbomach., 123, pp. 147-153.
-
(2001)
ASME J. Turbomach.
, vol.123
, pp. 147-153
-
-
Taslim, M.E.1
Setayeshgar, L.2
Spring, S.D.3
-
67
-
-
34548790443
-
In-wall network (mesh) cooling augmentation for turbine airfoils
-
Paper No. GT2004-54260, Vienna, Austria
-
Bunker, R. S., Bailey, J. C., Lee, C. P., and Stevens, C. W., 2004, "In-Wall Network (Mesh) Cooling Augmentation for Turbine Airfoils," Paper No. GT2004-54260, IGTI Turbo Expo, Vienna, Austria.
-
(2004)
IGTI Turbo Expo
-
-
Bunker, R.S.1
Bailey, J.C.2
Lee, C.P.3
Stevens, C.W.4
|