TearSim: A two-phase model addressing hot tearing formation during aluminum direct chill casting

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 10, 2006, Pages 3069-3083

  M'hamdi, Mohammed ^a   Mo, Asbjørn ^b   Fjær, Hallvard G ^c  

^a SINTEF   (Norway)

^b UNIVERSITY OF OSLO   (Norway)

^c INSTITUTE FOR ENERGY TECHNOLOGY   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

DENSIFICATION; EXTRUSION; FEEDING; INGOTS; MATHEMATICAL MODELS; SOLIDIFICATION; VISCOPLASTICITY;

DIRECT-CHILL CASTING; HOT TEARING FORMATION; VISCOPLASTIC DEFORMATION;

ALUMINUM CASTINGS;

EID: 33749590588     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0188-6     Document Type: Article

References (50)

1. J. Campbell: Castings, Butterworth-Heinemann, London, 1991, pp. 219-29.
2. M.L. Nedreberg: Ph.D. Thesis, University of Oslo, Oslo, February 1991.
3. G.K. Sigworth: AFS Trans., 1999, vol. 106, pp. 1053-69.
4. U. Feurer: Giesserei Forschung, 1976, vol. 28, p. 75.
5. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.
6. W.S. Pellini: Foundry, 1952, vol. 80, pp. 125-33.
7. Y.F. Guven and J.D. Hunt: Cast Metals, 1988, vol. 1, pp. 104-11.
8. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461-72.
9. A. Mo and I. Farup: in Modeling of Casting, Welding and Advanced Solidification Processes IX, P.R. Sahm, P.N. Hansen, and J.G. Conley, eds., Shaker Verlag, Aachen, Germany, 2000, pp. 56-62.
10. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349-61.
11. M. M'Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081-93.
12. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plast., 1997, vol. 13 (3), pp. 215-35.
13. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plast., 1999, vol. 15, pp. 981-1008.
14. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng., 2002, vol. A325, pp. 293-302.
15. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 183-90.
16. H.G. Fjær and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049-61.
17. H.G. Fjær, E.J. Holm, and M. M'Hamdi: Aluminium, 2002, vol. 78, pp. 843-47.
18. M. M'Hamdi, S. Benum, D. Mortensen, H.G. Fjær, and J.-M. Drezet: Metall. Mater. Trans., 2003, vol. 34A, pp. 1941-52.
19. M. M'Hamdi and A. Mo: in Light Metals, W. Schneider, ed., TMS-AIME, Warrendale, PA, 2002, pp. 709-16.
20. A. Mo, M. M'Hamdi, and H.G. Fjær: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., 2003, TMS, Warrendale, PA, pp. 199-206.
21. M. M'Hamdi, H.G. Fjær, A. Mo, S. Benum, and D. Mortensen: in Solidification of Aluminum Alloys, Q. Han, M.G. Chu, and D.A. Granger, eds., TMS, Warrendale, PA, 2004, pp. 191-99.
22. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, p. 85.
23. AA. Stangeland, A. Mo, Ø. Nielsen, D. Eskin, and M. M'Hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903-15.
24. D. Eskine and L. Katgerman: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH Verlag, New York, NY, 2000, pp. 54-60.
25. C.L. Martin, O. Ludwig, and M. Suéry: Proc. WCCM V, J. Eberhardsteiner, H.A. Mang, and F.G. Rammerstorfer, eds., Vienna, Austria, Vienna University of Technology, Vienna, 2002.
26. O. Ludwig, C.L. Martin, and M. Suéry: Mater. Forum 2004, vol. 28, pp. 357-62.
27. O. Ludwig, J.-M. Drezet, C.L. Martin, and M. Suéry: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1525-35.
28. J.C. Michel and P. Suquet: J. Mech. Phys. Solids, 1992, vol. 40, pp. 783-812.
29. J.M. Duva and P.D. Crow: Acta Metall., 1992, vol. 40, pp. 31-35.
30. O. Ludwig: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, Feb. 2004.
31. J. Ampuero, C. Charbon, A.F.A. Hoadley, and M. Rappaz: in Materials Processing in The Computer Age, V.R. Voller, M.S. Stachowicz, and B.G. Thomas, eds., TMS, Warrendale, PA, 1991, pp. 377-88.
32. J.-M. Drezet, O. Ludwig, M. M'Hamdi, H.G. Fjær, and C.L. Martin: in Light Metals, A.T. Tabereaux, ed., TMS, Warrendale, PA, 2004.
33. B. Magnin, L. Katgerman, and B. Hannart: in Modeling of Casting, Welding and Advanced Solidification Processes X, M. Cross and J. Campbell, eds., 1995 pp. 303-10.
34. H.G. Fjær, E.K. Jensen, and A. Mo: Proc. 5th Int. Aluminium Extrusion Technology Seminar, R.I. Werner, and V.R. Bird, eds., The Aluminum Association, Aluminum Extruders Council, U.S. 1992, pp. 113-20.
35. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 697-705.
36. M. Rappaz, J.-M. Drezet, P.-D. Grasso, and A. Jacot: in Modelling of Casting, Welding and Advanced Solidification Processes X, D. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 53-60.
37. V. Mathier, A. Jacot, and M. Rappaz: Modelling Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 1-12.
38. A.G. Evans and A. Rana: Acta Metall., 1980, vol. 28, pp. 129-41.
39. S. Benum, D. Mortensen, and H. Fjær: in Continuous Casting, K. Ehrke and W. Schneider, eds., Wiley-VCH Verlag, New York, NY, 2000, pp. 54-60.
40. W. Schneider and E.K. Jensen: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 931-36.
41. E.K. Jensen and W. Schneider: in Light Metals, C.M. Bickert, ed., TMS-AIME, Warrendale, PA, 1990, pp. 937-43.
42. J.A. Spittle and A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6-13.
43. B. Warrington and D.G. McCartney: Cast Met., 1989, vol. 2 (3), pp. 135-43.
44. D. Mortensen: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 119-33.
45. A.L. Dons, E.K. Jensen, Y. Langsrud, E. Trømborg, and S. Brusethaug: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2135-46.
46. C. Pequet, M. Gremaud, and M. Rappaz: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2095-2106.
47. M. M'Hamdi and A. Mo: Mater. Sci. Eng., A, 2005, vols. 413-14, pp. 105-08.
48. D.C.G. Lees: J. Inst. Met., 1946-47, vol. 73, pp. 537-40.
49. D.E.J. Talbot: Int. Metall. Rev., 1975, vol. 20, pp. 166-84.
50. R.S. Barnett, D.H. St John, and J.A. Taylor: in Solidification of Aluminum Alloys, Q. Han M.G. Chu, and D.A. Granger, eds., TMS, Warrendale, PA, 2004, pp. 201-09.