Advances of plasticity experiments on metal sheets and tubes and their applications to constitutive modeling

AIP Conference Proceedings

Volumn 778 A, Issue , 2005, Pages 20-39

  Kuwabara, Toshihiko ^a  

^a TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33749583066     PISSN: 0094243X     EISSN: 15517616     Source Type: Conference Proceeding    
DOI: 10.1063/1.2011190     Document Type: Conference Paper

References (100)

1. Banabic, D., "Anisotropy of Sheet Metal", in Formability of Metallic Materials: Plastic Anisotropy, Formability Testing, Forming Limits, edited by D. Banabic, Berlin: Springer-Verlag, 2000, pp. 119-172
2. Michno, M.J.Jr. and Findley, W.N., Int. J. Non-Linear Mech. 11, 59-82 (1976).
3. Hecker, S.S., "Experimental studies of yield phenomena in biaxially loaded metals", in Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, edited by J. A. Stricklin and K. H. Saczalski, New York: ASME, 1976, pp. 1-33.
4. Ikegami, K., "Experimental Plasticity on the Anisotropy of Metals", in Mechanical Behavior of Anisotropic Solids, Proc. Euromech Colloquim 115, edited by J.P. Boehler, Paris: CNRS, 1982, pp. 201-242.
5. Szczepiński, W. (ed.), Experimental Methods in Mechanics of Solids, Amsterdam: Elsevier, 1990.
6. Stout, M. G. and Kocks, U. F., "Effects of Texture on Plasticity", in Texture and Anisotropy, edited by U.F. Kocks, C.N. Tomé and H.-R. Wenk, Cambridge: Cambridge University Press, 1998, pp. 420-465.
7. McDowell, D. L., Int. J. Solids Struct. 37, 293-309 (2000).
8. Lee, D. and Backofen, W.A., Trans. TMS-AIME 236, 1077-1084 (1966).
9. Tozawa, Y., "Plastic Deformation Behavior under Conditions of Combined Stress", in Mechanics of Sheet Metal Forming, edited by D.P. Koistinen and N-.M. Wang, New York: Plenum Press, 1978, pp. 81-110.
10. Maeda, Y., Yanagawa, M., Barlat, F., Chung, K., Hayashida, Y., Hattori, S., Matsui, K., Brem, J.C., Lege, D.J., Murtha, S.J. and Ishikawa, T., Int. J. Plasticity 14, 301-318 (1998).
11. Lowden, M.A.W. and Hutchinson, W.B., Metall Trans 6A, 441-448 (1975).
12. Spitzig, W.A. and Richmond, O., Acta Metall. 32, 457-463 (1984).
13. Ferron, G. and Makinde, A. J., J. Testing Eval. 16, 253-256 (1988).
14. Makinde, A., Thibodeau, L. and Neale, K.W., Exp. Mech. 32, 138-144 (1992).
15. Boehler, J.P., Demmerle, S. and Koss, S., Exp. Mech. 34, 1-9 (1994).
16. Lin, S.B. and Ding, J.L., Int. J. Plasticity 11, 583-604 (1995).
17. Shiratori, E. and Ikegami, K., J. Mech. Phys Solids 16, 373-394 (1968).
18. Kreißig, R. and Schindler, J., Acta Mech. 65, 169-179 (1986).
19. Müller, W. and Pöhlandt, K., J. Mater. Processing Technol. 60, 643-648 (1996).
20. Hoferlin, E., Van Bael, A., Van Houtte, P., Steyaert, G. and De Maré, C., J Mater Processing Technol. 80/81, 545-550 (1998).
21. Borsutzki, M., Keßler, L. and Sonne, H-M., "Kennzeichnung des Verfestigungsverhaltens von Werkstoffen mit der Biaxialprüfung", in Werkstoffprüfung 2002, Proc. DVM-Conference, Bad Nauheim, 2002, pp. 186-192. (in German)
22. Kuwabara, T., Ikeda, S. and Kuroda, T., J. Mater. Processing Technol. 80/81, 517-523 (1998).
23. Kuwabara, T., Kuroda, M., Tvergaard, V. and Nomura, K., Acta Mater. 48, 2071-2079 (2000).
24. Kuwabara, T., Van Bael, A. and Iizuka, E., Acta Mater. 50, 3717-3729 (2002).
25. Ikeda, S. and Kuwabara, T., Tetsu-to-Hagané 90, 1016-1022 (2004). (in Japanese)
26. Kuwabara, T. and Van Bael, A., "Measurement and Analysis of Yield Locus of Sheet Aluminum Alloy 6XXX", in Proc. 4th Int. Conf. and Workshop on Numerical Simulation of 3D Sheet Forming Processes, edited by G.C. Gelin and P. Picart, Besançon, 1999, pp.85-90.
27. Kuwabara, T., Umemura, M., Yoshida, K., Kuroda, M. and Hirano, S., "Forming limits of 5000 series aluminum alloys with different magnesium contents", in Proc. 8th ESAFORM Conf., edited by D. Banabic, Bucureşti: The Publishing House of The Romanian Academy, 2005, pp. 399-402.
28. Kuwabara, T., Katami, C., Kikuchi, M., Shindo, T. and Ohwue, T., "Cup drawing of pure titanium sheet -finite element analysis and experimental validation-", in Proc. 7th Int. Conf. Numerical Methods in Industrial Forming Processes, edited by K. Mori, Lisse: Balkema, 2001, pp.781-787.
29. Hill R. and Hutchinson, J.W., J. Appl. Mech. 59, S1-S9 (1992).
30. Hill, R., Hecker, S.S. and Stout, M.G., Int. J. Solids Struct. 31, 2999-3021 (1994).
31. Barlat, F., Maeda, Y., Chung, K., Yanagawa, M., Brem, J.C., Hayashida, Y., Lege, D.J., Matsui, K., Murtha, S.J., Hattori, S., Becker, R.C. and Makosey, S., J. Mech. Phys. Solids 45, 1727-1763 (1997).
32. Hill, R., Proc. Roy. Soc. A193, 281-297 (1948).
33. Hosford, W.F., "On yield loci of anisotropic cubic metals", in Proceedings of the 7th North American Metalworking Research Conference, Dearborn, Michigan: Society of Manufacturing Engineers, 1979, pp. 191-196.
34. Logan, R.W. and Hosford, W.F., Int. J. Mech. Sci. 22, 419-430 (1980).
35. Van Houtte, P., The MTM-FHM software system, Ver.2., Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, 1995.
36. Ishigaki, H., "Deformation Analysis of Large Sized Panels in the Press Shop", in Mechanics of Sheet Metal Forming, edited by D.P. Koistinen and N-.M. Wang, New York: Plenum Press, 1978, pp. 315-339.
37. Wagoner, R.H. and Wang, N.-M., Int. J. Mech. Sci. 21, 255-264 (1979).
38. Wagoner, R.H., Metall. Trans. 12A, 877-882 (1981).
39. Kuwabara T. and Ikeda, S., Tetsu-to-Hagané 88, 334-339 (2002). (in Japanese)
40. Kuwabara, T., Ikeda, S. and Asano, Y., "Effect of anisotropic yield functions on the accuracy of springback simulation", in Proc. 8th Int. Conf. on Numerical Methods in Industrial Forming Processes, edited by S. Ghosh, New York: American Institute of Physics, 2004, pp. 887-892.
41. Pijlman, H.H., Brinkman, J., Huétink, J. and Vegter, H., "The Vegter yield criterion based on multi axial measurements", in Proc. 4th Int. Conf. and Workshop on Numerical Simulation of 3D Sheet Forming Processes, edited by G.C. Gelin and P. Picart, Besançon, 1999, pp. 109-114.
42. Baba, A. and Tozawa, Y., Bulletin of JSME 7, 834-843 (1964).
43. Moritoki, H., Trans. JSME 40, 354-371 (1974). (in Japanese)
44. Kuwabara, T., Seki, N. and Takahashi, S., "A Rigorous Numerical Analysis of Residual Curvature of Sheet Metals Subjected to Bending-Unbending under Tension", in Advanced Technology of Plasticity, Proc. 6th ICTP, edited by T. Gaiger, Berlin: Springer-Verlag, 1999, pp. 1071-1076.
45. Yoshida, F. and Uemori, T., Int. J. Mech. Sci. 45, 1687-1702 (2003).
46. Hutchinson, J.W., Proc. R. Soc. London A319, 247-272 (1970).
47. Støren, S., and Rice, J.R., J. Mech. Phys. Solids 23, 421-441 (1975).
48. Hutchinson, J.W. and Tvergaard V., Int. J. Solids Struct. 17, 451-470 (1981).
49. Needleman, A. and Tvergaard, V., "Analyses of Plastic Flow Localization in Metals", in ASME Applied Mechanics Reviews 45, S3-S18 (1992).
50. Hecker, SS., Acta Mech. 13, 69-86 (1972).
51. Kuroda, M. and Tvergaard, V., Acta Mater. 47, 3879-3890 (1999).
52. Kuwabara, T., Ishiki, M., Kuroda, M. and Takahashi, S., Journal de Physique IV 105, 347-354 (2003).
53. Kuroda, M. and Tvergaard, V., J. Mech. Phys. Solids 49, 1239-1263 (2001).
54. Dietrich, L. and Turski, K., Rozprawy Inzynierskie 26, 91-99 (1978). (in Polish)
55. Kuwabara, T., Morita, Y., Miyashita, Y. and Takahashi, S., "Elastic-plastic behavior of sheet metal subjected to in-plane reverse loading", in Proc. 5th Int. Symp. on Plasticity and Its Current Applications, edited by S. Tanimura and A.S. Khan, Luxembourg: Gordon and Breach Publishers, 1995, pp. 841-844.
56. Kuwabara, T., Kuroda, M., Hiwatashi, S. and Yoshida, H., "Strength-differential effect in dual-phase and interstitial-free steel sheets", in Proc. 9th Int. Symp. on Plasticity and Its Current Applications, edited by A.S. Khan, Neat Press, 2002, pp.325-327.
57. Spitzig, W.A., Sober, R.J. and Richmond, O., Acta Metall. 23, 885-893 (1975).
58. Spitzig, W.A., Sober, R.J. and Richmond, O., Met. Trans. 7A, 1703-1710 (1976).
59. Spitzig, W.A., Acta Metall. 27, 523-534 (1979).
60. Kuroda, M. and Kuwabara, T., Proc. Roy. Soc. Lond. A 458, 2243-2259 (2002).
61. Kuroda, M., Scripta Mater. 48, 605-610 (2003).
62. Asaro, R.J. and Needleman, A., Acta Metall. 33, 923-953 (1985).
63. Weinmann, K.J., Rosenberger, A.H. and Sanchez, L.R., Ann. CIRP 37, 289-293 (1988).
64. Yoshida, F., Urabe, M. and Toropov, V.V., Int. J. Mech. Sci. 40, 237-249 (1998).
65. Sanchez, L.R., Int. J. Mech. Sci. 42, 705-728 (2000).
66. G'sell, C., Boni, S. and Shrivastava, S., J. Mater. Sci. 18, 903-918 (1983).
67. Miyauchi, K., "Bauschinger Effect in Planar Shear Deformation of Sheet Metals", in Advanced Technology of Plasticity, Proc. 1st Int. Conf. Technology of Plasticity, Tokyo: The Japan Society for Technology of Plasticity, 1984, pp. 623-628.
68. Hu, Z., Rauch E.F. and Teodosiu, C., Int. J. Plasticity 8, 839-856 (1992).
69. Iwata, N., Matsui, M., Kato, T., Kaneko, K., Tsutamori, H., Suzuki, N. and Gotoh, M., "Numerical prediction of spring-back behavior of a stamped metal sheet by considering material nonlinearity during unloading", in Proc. 7th Int. Conf. Numerical Methods in Industrial Forming Processes, edited by K. Mori, Lisse: Balkema, 2001, pp. 693-698.
70. Yoshida, F., Uemori, T. and Fujiwara, K., Int. J. Plasticity 18, 633-659 (2002).
71. Kuwabara, T., Nagata, K., and Nakako, T., "Measurement and analysis of the Bauschinger effect of sheet metals subjected to in-plane stress reversals" in Proc. AMPT '01, edited by Torralba, J. M., Madrid, Univ. Carlos III de Madrid, 2001, pp. 407-414.
72. Ohno, N., Trans. ASME, J. Appl. Mech. 49, 721-726 (1982).
73. Ohno, N., Kachi, Y. and Murakami, S., Trans. JSME A 51, 2349-2356 (1985). (in Japanese)
74. Chaboche, J. L., Int. J. Plasticity 2, 149-188 (1986).
75. Yoshida, F. and Uemori, T., Int. J. Plasticity 18, 661-686 (2002).
76. Geng, L., Shen, Y. and Wagoner, R.H., Int. J. Plasticity 18, 743-767 (2002).
77. Lee, M-G., Kim, D., Kim, C., Wenner, M. L., Wagoner R. H. and Chung, K., Int. J. Plasticity 21, 883-914 (2005).
78. Kuwabara, T., Yoshida, K., Narihara, K. and Takahashi S., Int. J. Plasticity 21, 101-117 (2005).
79. Yoshida, K., Kuwabara, T., Narihara, K. and Takahashi S., J. JSTP 45, 123-128 (2004) (in Japanese);
80. Int. J. Forming Processes (to be published)
81. Barlat, F., Brem, J.C., Yoon, J.W., Chung, K., Dick, R.E., Lege, D.J., Pourboghrat, F., Choi, S.H., and Chu, E., Int. J. Plasticity 19, 1297-1319 (2003).
82. Keeler, S.P. and Backofen, W.A., Trans. ASM 56, 25-48 (1963).
83. Nakazima, K., Kikuma, T. and Hasuka, K., Yawata Technical Report 264, 8517-8530 (1968).
84. Mori, S., Manabe, K. and Nishimura, H., J. JSTP 29, 131-138 (1988). (in Japanese).
85. Graf, A. and Hosford, W.F., Met. Trans. 24A, 2503-2512 (1993).
86. Graf, A. and Hosford, W., Int. J. Mech. Sci. 36, 897-910 (1994).
87. Gotoh, M., Int. J. Solids Struct. 21, 1149-1163 (1985).
88. Kuroda, M. and Tvergaard, V., Int. J. Mech. Sci. 42, 867-887 (2000).
89. Gronostajski, I., J. Mech. Work. Technol. 10, 349-362 (1984).
90. Arrieux, R. and Boivin, M., Ann. CIRP 36, 195-198 (1987).
91. Darlington, R. A., Godwin, M. J. and Parker, J. D., Ironmaking and Steelmaking 27, 461-468 (2000).
92. Stoughton, T.B., Int. J. Mech. Sci. 42, 1-27 (2000).
93. Stoughton, T. B., Trans. ASME, J. Eng. Mater. Technol. 123, 417-422 (2001).
94. Wu, P.D., Graf, A., MacEwen, S.R., Lloyd, D.J., Jain, M. and Neale, K.W., Int. J. Solids Struct 42, 2225-2241 (2005).
95. Yoshida, K., Kuwabara, T. and Kuroda, M., "Forming Limit Stresses of Sheet Metal under Proportional and Combined Loadings", (in this proceedings)
96. Kim, K. H. and Yin, J. J., J. Mech. Phys. Solids 45, 841-851 (1997).
97. Kuwabara, T., Nakatani, T., Kuroda, M., Hiwatashi, S. and Yoshida, H., "Change of plastic anisotropy of an IF steel sheet under tension", in Proc. 2002 Jap. Spring Conf. Technology of Plasticity, Tokyo: Japan Society for Technology of Plasticity, 2002, pp. 77-78.(in Japanese)
98. Losilla, G., Boehler, J.-P. and Zheng, Q.-S., Acta Mech. 144, 169-18 (2000).
99. Dafalias, Y. F., J. Mech. Phys. Solids 48, 2231-2255 (2000).
100. Mellor P.B. and Parmar, A., "Plasticity Analysis of Sheet Metal Forming", in Mechanics of Sheet Metal Forming, edited by D.P. Koistinen and N-.M. Wang, New York: Plenum Press, 1978, pp. 53-74.