Modelling of sharp indentation experiments: Some fundamental issues

Philosophical Magazine

Volumn 86, Issue 33-35 SPEC. ISSUE, 2006, Pages 5155-5177

  Larsson, P L ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; ELASTIC MODULI; ELASTOPLASTICITY; MATHEMATICAL MODELS; NUMERICAL METHODS; PROBLEM SOLVING; RESIDUAL STRESSES;

FUNDAMENTAL ISSUES; INTERNATIONAL JOURNALS; MATERIAL (CONSTITUTIVE) MODELING; NANOINDENTATION DEVICES;

PROCESS CONTROL;

EID: 33748846125     PISSN: 14786435     EISSN: 14786443     Source Type: Journal    
DOI: 10.1080/14786430600589089     Document Type: Conference Paper

References (69)

1. J. B. Pethica, R. Hutchings and W. C. Oliver, Phil. Mag. A 48 593 (1983).
2. D. Tabor, Hardness of Metals (Oxford University Press, Oxford, 1951).
3. K. L. Johnson, J. Mech. Phys. Solids 18 115 (1970).
4. K. L. Johnson, Contact Mechanics (Cambridge University Press, Cambridge, 1985).
5. M. F. Doerner and W. D. Nix, J. Mater. Res. 1 601 (1986).
6. W. C. Oliver and G. M. Pharr, J. Mater. Res. 7 1564 (1992).
7. A. G. Atkins and D. Tabor, J. Mech. Phys. Solids 13 149 (1965).
8. N. A. Fleck and J. W. Hutchinson, J. Mech. Phys. Solids 41 1825 (1993).
9. H. Gao, Y. Huang, W. D. Nix, et al., J. Mech. Phys. Solids 47 1239 (1999).
10. Y. Huang, H. Gao, W. D. Nix, et al., J. Mech. Phys. Solids 48 99 (2000).
11. Y. Huang, S. Qu, K. C. Hwang, et al., Int. J. Plast. 20 753 (2004).
12. V. B. Shenoy, R. Miller, E. B. Tadmor, et al., J. Mech. Phys. Solids 47 611 (1999).
13. R. F. Cook and G. M. Pharr, J. Am. Ceram. Soc. 73 787 (1990).
14. J. Lopez, Polym. Test. 12 437 (1993).
15. E. Söderlund and D. J. Rowcliffe, in Analysis of Depth-Sensing Indentation, PhD thesis by E. Söderlund (Department of Materials Science and Engineering, KTH, Stockholm, Sweden, 1995).
16. B. R. Lawn, J. Am. Ceram. Soc. 81 1977 (1998).
17. W. C. Oliver and G. M. Pharr, J. Mater. Res. 19 3 (2004).
18. Y.-T. Cheng and C.-M. Cheng, Mater. Res. Eng. R 44 91 (2004).
19. P.-L. Larsson, Int. J. Mech. Sci. 43 895 (2001).
20. M. Dao, N. Chollacoop, K. J. Van Vliet, et al., Acta Mater. 49 3899 (2001).
21. A. E. Giannakopoulos, P.-L. Larsson and R. Vestergaard, Int. J. Solids Struct. 31 2679 (1994).
22. P.-L. Larsson, E. Söderlund, A. E. Giannakopoulos, et al., Int. J. Solids Struct. 33 221 (1996).
23. A. K. Bhattacharya and W. D. Nix, Int. J. Solids Struct. 24 881 (1988).
24. A. K. Bhattacharya and W. D. Nix, Int. J. Solids Struct. 24 1287 (1988).
25. T. A. Laursen and J. C. Simo, J. Mater. Res. 7 618 (1992).
26. S. Carlsson and P.-L. Larsson, Acta Mater. 49 2179 (2001).
27. S. Carlsson and P.-L. Larsson, Acta Mater. 49 2193 (2001).
28. M. Mata, Continuum analysis of sharp indentation experiments in metallic materials; theory and finite element simulations. PhD thesis, Universitat Politecnica de Catalunya (2004).
29. I. N. Sneddon, Int. J. Eng. Sci. 3 47 (1965).
30. T. C. T. Ting, J. Appl. Mech. 33 845 (1966).
31. A. F. Bower, N. A. Fleck, A. Needleman, et al., Proc. R. Soc. Lond. A 441 97 (1993).
32. B. Storåkers, S. Biwa and P.-L. Larsson, Int. J. Solids Struct. 34 3061 (1997).
33. A. E. Giannakopoulos and P.-L. Larsson, Mech. Mater. 25 1 (1997).
34. P.-L. Larsson and A. E. Giannakopoulos, Mater. Res. Eng. A 254 268 (1998).
35. R. Narasimhan, Mech. Mater. 36 633 (2004).
36. N. A. Fleck, H. Otoyo and A. Needleman, Int. J. Solids Struct. 29 1613 (1992).
37. R. A. Regueiro, D. J. Bammann, E. B. Marin, et al., J. Eng. Mater. Technol. 124 380 (2002).
38. J. Y. Shu and N. A. Fleck, Int. J. Solids Struct. 35 1363 (1998).
39. M. R. Begley and J. W. Hutchinson, J. Mech. Phys. Solids 46 2049 (1998).
40. Y. Huang, Z. Xue, H. Gao, et al., J. Mater. Res. 15 1786 (2000).
41. Z. Xue, Y. Huang, K. C. Hwang, et al., J. Eng. Mater. Technol. 124 371 (2002).
42. S. Qu, Y. Huang, W. D. Nix, et al., J. Mater. Res. 19 3423 (2004).
43. W. D. Nix and H. Gao, J. Mech. Phys. Solids 46 411 (1998).
44. J. G. Swadener, E. P. George and G. M. Pharr, J. Mech. Phys. Solids 50 681 (2002).
45. J. L. Loubet, J. M. Georges, O. Marchesini, et al., J. Tribol. 106 43 (1984).
46. I. N. Sneddon, Proc. Camb. Phil. Soc. 42 29 (1945).
47. A. Bolshakov and G. M. Pharr, J. Mater. Res. 13 1049 (1998).
48. H. Hertz, J. Reine angewandte Mathematik 92 156 (1882).
49. S. Biwa and B. Storåkers, J. Mech. Phys. Solids 43 1303 (1995).
50. M. Sakai, M. Sasaki and A. Matsuda, Acta Mater. 53 4455 (2005).
51. ABAQUS, Users Manual, Vers. 6.3, Hibbit, Karlsson and Sorensen (2002).
52. S. D. Mesarovic and N. A. Fleck, Proc. R. Soc. Lond. A 455 2707 (1999).
53. S. D. Mesarovic and N. A. Fleck, Int. J. Solids Struct. 37 7071 (2000).
54. Y. Y. Lim and M. M. Chaudhri, Phil. Mag. 83 3427 (2003).
55. Y. Y. Lim and M. M. Chaudhri, J. Appl. Phys. 98 073518-1 (2005).
56. A. Bolshakov, W. C. Oliver and G. M. Pharr, J. Mater. Res. 11 760 (1996).
57. P.-L. Larsson, J. Mater. Process. Technol. (2006) submitted for publication.
58. T. Y. Tsui, W. C. Oliver and G. M. Pharr, J. Mater. Res. 11 752 (1996).
59. W. R. Lafontaine, B. Yost and C.-Y. Li, J. Mater. Res. 5 776 (1990).
60. S. Suresh and A. E. Giannakopoulos, Acta Mater. 46 5755 (1998).
61. J. G. Swadener, B. Taljat and G. M. Pharr, J. Mater. Res. 16 2091 (2001).
62. D. Kwon, Personal communication (2005).
63. M. M. Chaudhri, J. Mater. Res. 16 336 (2001).
64. H. Ichimura and A. Rodrigo, Surf. Coat. Technol. 126 152 (2000).
65. K. Li, Y. Shapiro and J. C. M. Li, Acta Mater. 46 5569 (1998).
66. S. Jouannigot, J. Lamon and J. L. Loubet, Key Eng. Mater. 264/268 2271 (2004).
67. J. L. Bucaille, E. Felder and G. Hochstetter, Wear 249 422 (2001).
68. J. L. Bucaille, E. Felder and G. Hochstetter, J. Tribol. 126 372 (2004).
69. F. Wredenberg and P.-L. Larsson, in in Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics, edited by J. T. M. de Hosson, C. A. Brebbia, and S.-I. Nishida, Vol. VII (WIT Press, Southampton, 2005).