Developments in direct current plasma spraying

Surface and Coatings Technology

Volumn 201, Issue 5, 2006, Pages 1908-1921

  Fauchais, Pierre ^a   Montavon, Ghislain ^a   Vardelle, Michel ^a   Cedelle, Julie ^a  

^a UNIVERSITY OF LIMOGES   (France)

Author keywords

DC plasma torch; Plasma spraying; Process Control; Process diagnostic; Solution plasma spraying; Suspension plasma spraying

Indexed keywords

NANOSTRUCTURED MATERIALS; PLASMA TORCHES; PROCESS CONTROL;

DIRECT CURRENT (DC) PLASMA TORCHES; SOLUTION PLASMA SPRAYING; SUSPENSION PLASMA SPRAY; THERMAL SPRAY;

PLASMA SPRAYING;

NANOSTRUCTURED MATERIALS; PLASMA SPRAYING; PLASMA TORCHES; PROCESS CONTROL;

EID: 33748422848     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2006.04.033     Document Type: Article

References (145)

1. Fauchais P. J. Phys. D, Appl. Phys. 37 (2004) R86
2. Zirhut J., Haslbeck P., Landes K.D., Barbezat G., Müller M., and Schütz M. In: Coddet C. (Ed). Thermal Spray: Meeting the Challenges of the 21st Century (1998), Pub. ASM International, Materials Park, OH, USA 1375
3. Hühle H.M., and Barbezat G. Wissenschaften Kolloquiren (September 24-24 2003), Technishe Universität, Ilmenau, Germany e-proceedings, session 7.7
4. Moreau C., Gougeon P., Burgess A., and Ross D. In: Sampath S., and Berndt C.C. (Eds). Advances in Thermal Spray: Science and Technology (1995), Pub. ASM International, Materials Park, OH, USA 41
5. Matthäus G. Wissenschaften Kolloquiren (September 24-24 2003), Technishe Universität, Ilmenau, Germany e-proceedings, session 7.7
6. Nicoll A.R. In: Berndt C.C., and Sampath S. (Eds). Thermal Spray: Industrial Application (1994), Pub. ASM International, Materials Park, OH, USA 7
7. Barbezat G. Automot. Technol. 2 (2002) 47
8. Boulos M. J. High Temp. Mater. Process. 1 (1997) 17
9. Mailhot K., Gitzhofer F., and Boulos M. In: Berndt C.C. (Ed). Thermal Spray: A United Forum for Scientific and Technological Advances (1997), Pub. ASM International, Materials Park, OH, USA 1011
10. Leveillé V., Boulos M., and Gravelle D. In: Moreau C., and Marple B. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology vol. 2 (2003), Pub. ASM International, Materials Park, OH, USA 1011
11. Fauchais P., and Vardelle M. In: Moreau C., and Marple B. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology vol. 2 (2003), Pub. ASM International, Materials Park, OH, USA 1165
12. Refke A., Barbezat G., and Weirnli H. In: Lugscheider E.F. (Ed). International Thermal Spray Conference 2002 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
13. Wigren J., and Nylèn P. In: Moreau C., and Marple B. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology vol. 2 (2003), Pub. ASM International, Materials Park, OH, USA 1237
14. Fincke J.R., Haggard D.L., and Swank W.D. J. Therm. Spray Technol. 10 2 (2001) 255
15. Moreau C., Bisson J.F., Lima R.S., and Marple B.R. Pure Appl. Chem. 77 2 (2005) 443
16. Largo J., Hämäläinen E., and Krikka K. In: Moreau C., and Marple B. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology vol. 2 (2003), Pub. ASM International, Materials Park, OH, USA 1113
17. Renault T., Vardelle M., Fauchais P., Hoffman H., and Braillard F. In: Berndt C.C., Khor K.A., and Lugscheider E.F. (Eds). Thermal Spray 2001: New Surfaces for a New Millenium (2001), Pub. ASM International, Materials Park, OH, USA 743
18. Vardelle M., Renault T., and Fauchais P. J. High Temp. Mater. Process. 6 4 (2002) 469
19. Friedrich C.J., Gadrov R., Killinger A., and Li C. In: Moreau C., and Marple B. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology vol. 1 (2003), Pub. ASM International, Materials Park, OH, USA 779
20. Nadeau A. Non Destructive Evaluation of Coating Thickness in Sensors and Control 2004 (2004), Pub. ASM International, Materials Park, OH, USA e-proceedings
21. Rigot D., Delluc G., Pateyron B., Coudert J.F., Fauchais P., and Wigren J. J. High Temp. Mater. Process. 3 (2002) 1113
22. Vardelle M., Vardelle A., Fauchais P., Li K.-I., Dussoubs B., and Themelis N.J. J. Therm. Spray Technol. 10 2 (2001) 267
23. G. Renouard-Vallet, in French "Elaboration par projection plasma d'électrolytes de zircone yttriée dense et de faible épaisseur pour SOFC" (Elaboration by plasma spraying of electrolytes of Yttria Stabilized Zirconia dense and thin coatings for SOFC), PhD thesis, University of Limoges, February 2004.
24. Leblanc L., Gougeon P., and Moreau C. In: Berndt C.C. (Ed). Thermal Spray: A United Forum for Scientific and Technological Advances (1997), Pub. ASM International, Materials Park, OH, USA 567
25. Duan Z., Beall L., Schein J., Heberlein J., and Stachowitz M. J. Therm. Spray Technol. 9 2 (2000) 225
26. Moreau C. Advanced Particle Diagnostics for Controlling Plasma Spray Process in Sensors and Control 2004 (2004), Pub. ASM International, Materials Park, OH, USA e-proceedings
27. Das S., Suri V.K., Chandra U., and Sampath K. J. Therm. Spray Technol. 4 (1995) 153
28. Lynn M., Lynn S., Varacalle D.J., and Riggs W.L. In: Berndt C.C., and Bernecki T.F. (Eds). Thermal Spray: Research and Applications (1993), Pub. ASM International, Materials Park, OH, USA 315
29. Fukanuma H. In: Berndt C.C. (Ed). Thermal Spray: Practical Solutions for Engineering Problems (1996), Pub. ASM International, Materials Park, OH, USA 647
30. Einerson C.J., Clarck D.E., Detering B.A., and Taylor P.L. In: Berndt C.C., and Bernecki T.F. (Eds). Thermal Spray Coatings: Research, Design and Applications (1993), Pub. ASM International, Materials Park, OH, USA 205
31. Chen S.L., Sitonen P., and Kettunen P. In: Berndt C.C. (Ed). Thermal Spray: Advances in Coatings Technology (1992), Pub. ASM International, Materials Park, OH, USA 51
32. Fantassi S., Vardelle M., Fauchais P., and Moreau C. In: Berndt C.C. (Ed). Thermal Spray: Advances in Coatings Technology (1992), Pub. ASM International, Materials Park, OH, USA 755
33. Pasandideh-Fard M., Pershin V., Chandra S., and Mostaghimi J. J. Therm. Spray Technol. 11 (2002) 206
34. Sobolev V.V., and Guilemany J.M. Mater. Lett. 37 (1998) 132
35. Montavon G., Sampath S., Berndt C.C., Herman H., and Coddet C. In: Ohmori A. (Ed). Thermal Spraying: Current Status and Future Trends (1995), Pub. High Temperature Society of Japan, Osaka, Japan 333
36. Pasandideh-Fard M., and Mostaghimi J. Plasma Chem. Plasma Process. 16 (1996) 83S
37. Fauchais P., Vardelle M., Vardelle A., and Bianchi L. Ceram. Int. 22 (1996) 295
38. Fauchais P., Coudert J.F., and Pateyron B. Rev. Gén. Therm. 35 (1996) 543 (in french)
39. Huang P.C., Heberlein J., and Pfender E. Surf. Coat. Technol. 73 (1995) 142
40. Henne R.H., Bouyer E., Borck V., and Schiller G. In: Berndt C.C., Khor K.A., and Lugscheider E.F. (Eds). New Surfaces for a New Millennium (2001), Pub. ASM International, Materials Park, OH, USA 471
41. Sakaki K., Huruhashi N., Tamaki K., and Shimizu Y. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2002 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany 385
42. Leblanc L., Gougeon P., and Moreau C. In: Berndt C.C. (Ed). Thermal Spray: A United Forum for Scientific and Technological Advance (1997), ASM International, Materials Park, OH, USA 567
43. Westhoff R., Trapaga G., and Szekely J. Metall. Trans. 23B (1992) 683
44. Kundas S., and Iliyuschenko A. In: Berndt C.C., Khor K.A., and Lugscheider E. (Eds). New Surfaces for a New Millennium (2001), Pub. ASM International, Materials Park, OH, USA 925
45. Bossoutrot C., Braillard F., Renault T., Vardelle M., and Fauchais P. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2002 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany 56
46. Nylén P., Wigen J., Idetjärn J., and Pejryd L. In: Berndt C.C., Khor K.A., and Lugscheider E. (Eds). New Surfaces for a New Millennium (2001), Pub. ASM International, Materials Park, OH, USA 1213
47. Friis M., and Persson C. In: Berndt C.C., Khor K.A., and Lugscheider E. (Eds). New Surfaces for a New Millennium (2001), Pub. ASM International, Materials Park, OH, USA 1313
48. Fincke J.R., Swank W.D., Bewley R.L., Haggard D.C., Gevelber M., and Wroblewski D. Surf. Coat. Technol. 146-147 (2001) 537
49. Guessasma S., Montavon G., and Coddet C. Comput. Mater. Sci. 29 (2004) 315
50. Gevelber M., Cui C., Vattiat B., Friedman Z., Woroblenski D., and Basu S. In: Lugscheider E.F. (Ed). International Thermal Spray Conference 2005 (2005), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
51. Heberlein J. J. High Temp. Mater. Process. 6 3 (2002) 321
52. Heberlein J. Sensing and Control of Plasma Torch Instabilities in Sensors and Control 2004 (2004), Pub. ASM International, Materials Park, OH, USA e-proceedings
53. Boulos M., Fauchais P., and Pfender E. Thermal Plasmas (1994), Pub. Plenum Press, NY (USA) and London (UK)
54. C. Baudry, in French "Contribution à la modélisation transitoire et tridimensionnelle du comportement dynamique de l'arc dans une torch à plasma" (Contribution to the transient and 3D modeling of the dynamic behavior of the arc within a plasma spray torch), PhD thesis, University of Limoges, November 2003.
55. E. Legros, in French "Contribution of la modélisation tridimensionnelle du procédé de projection thermique et application à un dispositif bi-torches" (Contribution to 3D modeling of the spray process and application to a two-torch set-up), PhD thesis, University of Limoges, November 2003.
56. Fukumoto M., Shiba M., Haji H., and Yasui T. Pure Appl. Chem. 77 2 (2005) 424
57. Fauchais P., Fukumoto M., Vardelle A., and Vardelle M. J. Therm. Spray Technol. 13 (2004) 337
58. Vardelle A., Moreau C., and Fauchais P. MRS Bulletin (July 2002) 32
59. Escure C., Vardelle M., and Fauchais P. Plasma Chem. Plasma Proc. 23 2 (2003) 185
60. Cedelle J., Vardelle M., Pateyron B., and Fauchais P. J. High Temp. Mater. Process. 8 (2004) 353
61. Gougeon P., and Moreau C. J. Therm. Spray Technol. 10 1 (2001) 76
62. Fukumoto M., and Huang Y. J. Therm. Spray Technol. 8 3 (1999) 427
63. Amsler S.Q., Delplanque J.-P., Rein M., and Lavernia E.J. Int. Mater. Rev. 47 6 (2002) 265
64. Fukumoto M., and Nishigana N.E. Surf. Coat. Technol. 161 (2003) 110
65. J. Cedelle, in French "Etude de la formation de lamelles résultant de l'impact de gouttes millimétriques et micrométriques : application à la réalisation d'un dépôt par projection plasma" (Study of the formation of lamellae resulting from the impact of millimeter and micrometer sized droplets: application to coating manufacturing by plasma spraying), PhD thesis, University of Limoges, October 2005.
66. Fukumoto M., Ohgituni I., and Yasui T. Mater. Trans. 45 6 (2004) 1869
67. Fauchais P., Vardelle A., and Dussoubs B. J. Therm. Spray Technol. 10 1 (2001) 44
68. Pasandideh-Fard M., Bhola R., Chandra S., and Mostaghimi J. Int. J. Heat Mass Transfer 41 (1998) 2224
69. Bussmann M., Mostaghimi J., and Chandra S. Phys. Fluids 11 (1999) 1406
70. Pasandideh-Fard M., Chandra S., and Mostaghimi J. Int. J. Heat Mass Transfer 45 (2002) 2229
71. Raessi M., Mostaghimi J., and Bussmann M. In: Mostaghimi J., et al. (Ed). Proceddings of ISPC17 (2005), Pub. University of Toronto, Toronto, ON, CA
72. Renesh K., Ny H.W., and Yu S.C.M. J. Therm. Spray Technol. 12 (2003) 53
73. Ghafouri-Azar R., Mostaghimi J., Chandra S., and Charuschi M. J. Therm. Spray Technol. 12 (2003) 53
74. Mostaghimi J., Chandra S., Ghafouri-Azar R., and Dolatabadi M. Surf. Coat. Technol. 163 (2003) 1
75. Hahn H., Mondal P., and Padmanabhan K. Nanostruct. Mater. 9 (1997) 603
76. Dahotre N.B., and Nayak S. Surf. Coat. Technol. 194 1 (2005) 404
77. Fauchais P., Vardelle M., Coudert J.F., Vardelle A., Delbos C., and Fazilleau J. Pure Appl. Chem. 77 (2005) 475
78. Shaw L.L., Goberman D., Ren R., Gell M., Jiang S., Wang Y., Xiao T.D., and Strutt P.R. Surf. Coat. Technol. 130 (2003) 1
79. Berndt C.C., and Lavernia E.J. J. Therm. Spray Technol. 7 (1998) 411
80. Gell M. J. Nanostruct. Mater. 6 (1995) 997
81. Gell M. Mater. Sci. Eng., A 204 (1995) 246
82. Shaw L., Goberman D., Ren R., and Gell M. Surf. Coat. Technol. 130 (2000) 1
83. Gell M., Jordan E.H., Sohn Y.H., Goberman D., Shaw L., and Xiao T.D. Surf. Coat. Technol. 146-147 (2001) 48
84. Jordan E.H., Gell M., Sohu Y.H., Goberman D., Shaw L., Jiang S., Wang M., Xiao T.D., Wang Y., and Strutt P. Mater. Sci. Eng., A 301 (2003) 237
85. Luo H., Goberman D., Shaw L., and Gell M. Mater. Sci. Eng., A 346 (2003) 237
86. Wang Y., Jiang S., Wang M., Xiao T.D., and Strutt P.R. Wear 237 (2000) 176
87. Zhu Y., Huang M., Huang J., and Ding C. J. Therm. Spray Technol. 8 2 (1999) 219
88. Kear B.H., Kalman Z., Sadanghi R.K., Skandan G., Colaizzi J., and Mayo W.E. J. Therm. Spray Technol. 9 4 (2000) 483
89. Shaw L.L., Goberman D., Ren R., et al. Surf. Coat. Technol. 130 (2000) 1
90. Bausal P., Padture N.P., and Vasiliev A. Acta Mater. 51 (2003) 2959
91. th IFHTSE congress, Pub (2003), ASM International, Materials Park, OH, USA e-proceedings
92. Zhu Y.C., and Ding C.X. J. Chin. Ceram. Soc. 27 5 (1999) 520
93. Chwa S.O., Klein D., Coddet C., Bertrand G., Liao H., Toma F.L., and Ohmori A. In: von Hofe D. (Ed). Thermal Spray 2004: Advances in Technology and Applications (2004), Pub. ASM International, Materials Park, OH, USA 837
94. Lima R.S., and Marple B.R. Surf. Coat. Technol. (2006)
95. Zhu Y.C., Huang M., and Ding X. J. Therm. Spray Technol. 8 (1999) 219
96. Zeng Y., Lee S.W., Gao L., and Ding C.X. Eur. Ceram. Soc. 22 (2002) 347
97. Lima R.S., Kucuk A., and Berndt C.C. Surf. Coat. Technol. 135 (2001) 166
98. Lima R.S., Kucuk A., and Berndt C.C. Mater. Sci. Technol., A 327 (2002) 224
99. Lima R.S., Kucuk A., and Berndt C.C. Mater. Sci. Technol., A 313 (2001) 75
100. Zeng Y., Lu S.W., Gao L., and Ding C.X. Eur. Ceram. Soc. 22 (2002) 347
101. Chen H., and Ding C.X. Surf. Coat. Technol. 150 (2001) 31
102. Chen H., Zhang Y.F., and Ding C.X. Wear 253 (2002) 885
103. Liang B., Liao H., Ding C., and Coddet C. Thin Solid Films 484 (2005) 225
104. Li J.F., Liao H., Wang X.Y., Coddet C., Chen H., and Ding C.X. Thin Solid Films 460 (2004) 101
105. Chen H., Ding C., Zhang P., La P., and Lu S.W. Surf. Coat. Technol. 173 (2003) 144
106. Chen H., Zhou X., and Ding C. Eur. Ceram. Soc. 23 (2003) 1449
107. Chen H., Zeng Y., and Ding C. Eur. Ceram. Soc. 23 (2003) 491
108. Zhu Y., Yakimura K., Ding C., and Zang P. Thin Solid Films 388 (2001) 277
109. Jiansirisomboon S., MacKenzie K.J.D., Roberts S.G., and Grant P.S. Eur. Ceram. Soc. 23 (2003) 961
110. He J., and Schoenung J.M. Surf. Coat. Technol. 157 (2002) 72
111. Kear B.H., Sadanji R.K., Jain M., Yao R., Kalman Z., Skandan G., and Mayo W.E. J. Therm. Spray Technol. 9 3 (2000) 399
112. Qiao Y., Liu Y.R., and Fisher T.E. J. Therm. Spray Technol. 10 1 (2001) 118
113. Zeng Y., Ding C., and Lee S. In: Moreau C., and Marple B.R. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology (2003), Pub. ASM International, Materials Park, OH, USA 671
114. Chraska T., King A.H., and Berndt C.C. Mater. Sci. Eng., A 286 (2000) 169
115. Ilavsky J., and Stalick J.K. Surf. Coat. Technol. 127 (2000) 126
116. Racek O., Berndt C.C., Garu D., and Heberlein J. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
117. Yang H., Wang H.G., and Cao X.P. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
118. Ding C., Chen H., Liu X., and Zeng Y. In: Moreau C., and Marple B.R. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology (2003), Pub. ASM International, Materials Park, OH, USA 455
119. Perepezko J.H., and Wilde G. J. Non-Cryst. Solids 274 (2000) 271
120. Branagan J., Marshall M.C., and Meacham B.E. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
121. Kappes B.B., Meachan B.E., Tang Y.L., and Branagan D.J. Nanotechnology 14 11 (2003) 1228
122. Rohan P., Bonaricha S., Legoux J.-G., Moreau C., Denoirjean A., Vardelle A., and Le Niniven C. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
123. Wittmann K., Blein F., Coudert J.F., and Fauchais P. In: Berndt C.C., Khor K.A., and Lugscheider E. (Eds). New Surfaces for a New Millennium (2001), Pub. ASM International, Materials Park, OH, USA 375
124. J. Fazilleau, C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, B. Pateyron, "Understanding zirconia suspension plasma spraying through simple models. Part 1: suspension injection and behavior", Plasma Chem. Plasma Proc., (accepted for publication).
125. Blazdell P., and Kuroda S. Surf. Coat. Technol. 123 (2000) 239
126. Oberste-Berghouse J., Bonaricha S., Legoux J.-G., and Moreau C. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
127. Fauchais P., Rat V., Delbos C., Coudert J.F., Chartier T., and Bianchi L. IEEE Trans. Plasma Sci. 33 2 (2005) 920
128. Doring J.E., Vassen R., and Stöver D. In: Moreau C., and Marple B.R. (Eds). Thermal Spray 2003: Advancing the Science and Applying the Technology (2003), Pub. ASM International, Materials Park, OH, USA 641
129. C. Delbos, J. Fazilleau, V. Rat, J.F. Coudert, P. Fauchais, B. Pateyron, "Understanding zirconia suspension plasma spraying through simple models. Part 2: particle treatment and coating", Plasma Chem. Plasma Proc., (accepted for publication).
130. Siegert R., Döring J.-E., Marquis J.L., Vassen R., Sebold D., and Stöver D. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2005), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
131. Bonaricha S., Oberste-Berghaus J., Legoux J.-G., and Moreau C. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
132. Delbos C., Fazilleau J., Rat V., Coudert J.F., Fauchais P., and Bianchi L. In: von Hofe D. (Ed). Thermal Spray 2004: Advances in Technology and Applications (2004), Pub. ASM International, Materials Park, OH, USA 534
133. Oberste-Berghaus J., Bonaricha S., Legoux J.-G., and Moreau C. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
134. C. Monterrubio-Badillo, H. Ageorges, T. Chartier, J.F. Coudert, P. Fauchais, Preparation of LaMnO3 perovskite thin films by suspension plasma spraying for SOFC cathodes", Surf. Coat. Technol., (in press).
135. Siegert R., Doring J.-E., Marques J.-L., Vassen R., Sebold D., and Stöver D. In: Lugscheider E.F. (Ed). Proceedings of International Thermal Spray Conference 2005 (2002), Pub. DVS-Verlag GmbH, Düsseldorf, Germany e-proceedings
136. Karthikeyan J., Berndt C.C., Tikkanen J., Reddy S., and Herman H. Mater. Sci. Eng., A 238 (1997) 275
137. G.M. Chow, L.K. Kurihara, T.D. Xiao, P.R. Strutt, C.W. Strack, Z.A. Zatorski, US patent application20,020,031,658 (March 14, 2002).
138. Padture N.P., Schlichting X.W., Bhata T., Ozturk A., Cetegen B., Jordan E.H., Gell M., Xiao T.D., Strutt P.R., Garcia F., Miranzu P., and Ossendi M.I. Acta Mater. 49 (2001) 2251
139. Xie X.D., Ma X.O., Jordan E.H., Padture N.P., Xiao D.T., and Gell M. Mater. Sci. Eng., A 362 (2003) 204
140. Jordan E.H., Xie L., Ma X., Gell M., Padture N.P., Cetegen B.M., Ozturk A., Roth J., Xiao T.D., and Bryant P.E.L. J. Therm. Spray Technol. 13 (2004) 57
141. Gell M., Xie L., Ma X., Jordan E.H., and Padture N.P. Surf. Coat. Technol. 13 (2004) 57
142. Xie L., Jordan E.H., Padture N.P., and Gell M. Mater. Sci. Eng., A 381 (2004) 189
143. Ozturk A., and Cetegen B.M. Mater. Sci. Eng., A 384 (2004) 331
144. Ozturk A., and Cetegen B.M. Int. J. Heat Mass Tranfer 48 (2005) 4367
145. Ma X.Q., Xiao T.D., Roth J., Xie L.D., Jordan E.H., Padture N.P., and Gell M. In: von Hofe D. (Ed). Thick TBCs with Controlled Microstructure Using Solution Precursor Plasma Spray Process in Thermal Spray 2004: Advances in Technology and Applications (2004), Pub. ASM International, Materials Park, OH, USA 1103