Heat transfer and operating conditions for freeze concentration in a liquid-solid fluidized bed heat exchanger

Chemical Engineering and Processing: Process Intensification

Volumn 45, Issue 8, 2006, Pages 698-710

  Habib, Boaz ^a   Farid, Mohammed ^a  

^a UNIVERSITY OF AUCKLAND   (New Zealand)

Author keywords

Fluidized bed heat exchanger; Freeze concentration; Heat transfer; NaCl solutions

Indexed keywords

CONCENTRATION (PROCESS); EQUIPMENT TESTING; FLUIDIZED BEDS; HEAT EXCHANGERS; HEAT TRANSFER; POROSITY;

FLUIDIZED BED HEAT EXCHANGER (FBHE); FREEZE CONCENTRATION; FREEZING POINT DEPRESSION (FPD); SCRAPED SURFACE HEAT EXCHANGER (SSHE);

SEPARATION;

CONCENTRATION (PROCESS); EQUIPMENT TESTING; FLUIDIZED BEDS; HEAT EXCHANGERS; HEAT TRANSFER; POROSITY; SEPARATION;

EID: 33747891422     PISSN: 02552701     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cep.2006.02.006     Document Type: Article

References (48)

1. Thijssen H.A.C., and Van der Malen B. Implications on quality of energy savings in the concentration of foods. Res. Conserv. 7 (1981) 287-299
2. Deshpande S.S., Sathe S.K., and Salunke D.K. Freeze concentration of fruit juices. Crit. Rev. Food Sci. Nutri. 20 (1984) 173-247
3. Rodriguez M., et al. A comparative study of reverse osmosis and freeze concentration for the removal of valeric acid from wastewaters. Desalination 127 (2000) 1-11
4. Roos A.C., et al. Development of a vacuum crystallizer for the freeze concentration of industrial waste water. Chem. Eng. Res. Des.: Trans IChemE 81 (2003) 881-892
5. Miyawaki O., et al. Tubular ice system for scale-up of progressive freeze concentration. J. Food Eng. 69 (2005) 107-113
6. Van Pelt W.H. Dutch process cuts cost of freeze concentration. Food Eng. 47 (1975) 77-79
7. R.J. Verschuur, et al. Innovations in freeze concentration technology, in: 15th Int. Symp. Ind. Crys., Sorrento, Italy, 2002.
8. Petrotos K.B., and Lazarides H.N. Osmotic concentration of liquid foods. J. Food. Eng. 49 (2001) 201-206
9. L. Kerkhof, Installation costs of a freeze concentration plant, personal communication, Niro Process Technology B.V., 2005.
10. Thijssen H.A.C. Current developments in the freeze concentration of liquid foods. In: Goldblith S.A., Rey L., and Rothmayr W.W. (Eds). Freeze Drying and Advanced Food Technology (1975), Academic Press Inc., London 481-501
11. Anon., Scraped surface heat exchangers. Waukesha Cherry Burrell Product Literature: Product literature, 2001.
12. D.G. Klaren, Fluidized bed heat exchanger costs as a function of surface area, personal communication, Klaren B.V., 2004.
13. Rautenbach R., and Katz T. Survey of long time behaviour and costs of industrial fluidized bed heat exchangers. Desalination 108 (1997) 335-344
14. Klaren D.G., and Bailie R.E. The non-fouling fluidized bed heat exchanger. Am. Soc. Mech. Eng., Heat Transfer Div. 108 (1989) 273-279
15. Klaren D.G. Self cleaning heat exchangers. Int. J. Hydrocarbon Eng. 4 (1999) 42-48
16. G.E. Engdahl, J.B. Maher, Fluidized bed crystallization apparatus and method, Chicago Bridge and Iron Company, US Patent 4291550 (1981).
17. US Navy, Freeze Crystallisation Desalting/Concentration System utilising Fluidised Bed Heat Exchanger in National Technical Information Service (NTIS) (1981).
18. J.W. Meewisse, C.A.F. Ferreira, Ice slurry production with a fluidised bed heat exchanger, in: Second IIR Workshop on Ice Slurries, Paris, France (2000).
19. J.W. Meewisse, C.A.F. Ferreira, Fluidized bed ice slurry generator: Operating range, in: Fifth IIR Workshop on Ice Slurries, Stockholm, Sweden (2002).
20. Meewisse J.W., and Ferreira C.A.F. Validation of the use of heat transfer models in liquid/solid fluidized beds for ice slurry generation. Int. J. Heat Mass Transfer 46 (2003) 3683-3695
21. P. Pronk, J.W. Meewisse, C.A.F. Ferreira, Heat transfer model for a fluidized bed ice slurry generator, in: Fourth Workshop on Ice Slurries of the IIF/IIR, Osaka, Japan (2001).
22. P. Pronk, et al., Ice slurry production with a circulating fluidized bed heat exchanger, in: Int. Congr. Refrig., Washington, DC (2003).
23. J.W. Meewisse, C.A.F. Ferreira, Experiments on fluidised bed ice slurry production, in: Third IIR Workshop on Ice Slurries, Lucerne, Switzerland (2001).
24. Taylor J.R. In: Commins E.D. (Ed). An Introduction to Error Analysis-The Study of Uncertainties in Physical Measurements (1982), University Science Books, California, USA
25. Aghajani M., Muller-Steinhagen H., and Jamialahmadi M. New design equations for liquid/solid fluidized bed heat exchangers. Int. J. Heat Mass Transfer 48 (2005) 317-329
26. Hartman M., et al. Predicting the free-fall velocities of spheres. Chem. Eng. Sci. 44 (1989) 1743-1745
27. Rowe P.N. A convenient empirical equation for estimation of the Richarson-Zaki exponent. Chem. Eng. Sci. 42 (1987) 2795-2796
28. Cole D.M. The microstructure of ice and its influence on mechanical properties. Eng. Frac. Mech. 68 (2001) 1797-1822
29. Poplin J.P., and Wang A.T. Mechanical properties of rafted annual sea ice. Cold Reg. Sci. Technol. 23 (1994) 41-67
30. Brown R.L., and Kawamura T. A preliminary comparison of the properties of pure ice and sea ice single crystals. Cold Reg. Sci. Technol. 19 (1991) 275-284
31. Incropera F.P., and Dewitt D.P. Internal flow, in Fundamentals of heat and mass transfer (1996), John Wiley & Sons Inc., USA pp. 454-456
32. Mills A.F. Convection fundamentals and correlations, in Heat Transfer vol. 336 (1992), Richard D. Irwin Inc., USA pp. 270-274
33. Jamialahmadi M., and Muller-Steinhagen H. Hydrodynamics and heat transfer of liquid fluidized bed systems. Chem. Eng. Commun. 179 (2000) 35-79
34. In: Lange N.A. (Ed). Freezing Point of Sodium Chloride Brines Handbook of Chemistry (1967), McGraw Hill Book Company, USA 1205
35. Verdoes D., et al. Improved procedures for separating crystals from the melt. Appl. Therm. Eng. 17 (1997) 879-888
36. Barduhn A.J. The status of freeze desalination. Chem. Eng. Prog. 71 (1975) 80-87
37. J.W. Meewisse, Fluidized bed ice slurry generator for enhanced secondary cooling systems-PhD thesis in Engineering Thermodynamics, Delft University of Technology (2004).
38. Harrod M. Scraped surface heat exchangers-a literature survey of flow patterns, mixing effects, residence time distribution, heat transfer and power requirements. J. Food Process. Eng. 9 (1986) 1-62
39. Harrod M. Temperature variations in the outlet from scraped surface heat exchangers. J. Food Process. Eng. 13 (1990) 23-38
40. Harrod M. Modelling of the media-side heat transfer in scraped surface heat exchangers. J. Food Process. Eng. 13 (1990) 1-21
41. de Goede R., and de Jong E.J. Heat transfer properties of a scraped-surface heat exchanger in the turbulent flow regime. Chem. Eng. Sci. 48 (1993) 1393-1404
42. Trommelen A.M., and Beek W.J. The mechanism of power consumption in a Votator+-type scraped-surface heat exchanger. Chem. Eng. Sci. 26 (1971) 1977-1986
43. Abichandani H., and Sarma S.C. Heat transfer and power requirements in horizontal thin film scraped surface heat exchangers. Chem. Eng. Sci. 43 (1988) 871-881
44. Lakhdar M.B., et al. Heat transfer with freezing in a scraped surface heat exchanger. Appl. Therm. Eng. 25 (2005) 45-60
45. Qin F., et al. Heat transfer and power consumption in a scraped-surface heat exchanger while freezing aqueous solutions. Sep. Purif. Technol. 48 (2006) 150-158
46. Stamatiou E., Meewisse J.W., and Kawaji M. Ice slurry generation involving moving parts. Int. J. Refrig. 28 (2005) 60-72
47. Haid M., Martin H., and Muller-Steinhagen H. Heat transfer to liquid-solid fluidized beds. Chem. Eng. Proc. 33 (1994) 211-225
48. J.S. Kollbach, Enwicklung eines Verdampfunsverfahrens mit Wirbelschichtwarmeaustauscher zum Eindampfen krustenbildender Abwasser, Ph.D. Thesis, RWTH Aachen, 1987.