Does Neck/Liner Impingement Increase Wear of Ultrahigh-Molecular-Weight Polyethylene Liners?

Journal of Arthroplasty

Volumn 21, Issue 6 SUPPL., 2006, Pages 65-71

  Usrey, Molly M ^a   Noble, Philip C ^a,b   Rudner, Lanny J ^b   Conditt, Michael A ^a   Birman, Michael V ^b   Santore, Richard F ^c   Mathis, Kenneth B ^d  

^a Institute of Orthopedic Research and Education   (United States)

^b BAYLOR COLLEGE OF MEDICINE   (United States)

^c UNIVERSITY OF SAN DIEGO   (United States)

^d HOUSTON METHODIST HOSPITAL   (United States)

Author keywords

backside wear; impingement; ultrahigh molecular weight polyethylene

Indexed keywords

POLYETHYLENE;

ACETABULUM; ADULT; AGED; ARTICLE; CONTROLLED STUDY; HUMAN; MAJOR CLINICAL STUDY; MATERIAL COATING; MATERIALS TESTING; MOLECULAR WEIGHT; MOTION; PROSTHESIS FAILURE; TOTAL HIP PROSTHESIS;

ACETABULUM; ADULT; AGED; AGED, 80 AND OVER; ARTHROPLASTY, REPLACEMENT, HIP; BIOMECHANICS; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; HUMANS; MICROSCOPY, ELECTRON, SCANNING; MIDDLE AGED; MOLECULAR WEIGHT; POLYETHYLENE; PROSTHESIS DESIGN; PROSTHESIS FAILURE;

EID: 33747888169     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2006.05.013     Document Type: Article

References (31)

1. Bankston A.B., Cates H., Ritter M.A., et al. Polyethylene wear in total hip arthroplasty. Clin Orthop Relat Res (1995) 7
2. Harris W.H. Osteolysis and particle disease in hip replacement. A review. Acta Orthop Scand 65 (1994) 113
3. Jasty M., Bragdon C., Jiranek W., et al. Etiology of osteolysis around porous-coated cementless total hip arthroplasties. Clin Orthop Relat Res (1994) 111
4. Jasty M., Goetz D.D., Bragdon C.R., et al. Wear of polyethylene acetabular components in total hip arthroplasty. An analysis of one hundred and twenty-eight components retrieved at autopsy or revision operations. J Bone Joint Surg Am 79 (1997) 349
5. Sochart D.H. Relationship of acetabular wear to osteolysis and loosening in total hip arthroplasty. Clin Orthop Relat Res (1999) 135
6. Lewis G. Properties of crosslinked ultra-high-molecular-weight polyethylene. Biomaterials 22 (2001) 371
7. McKellop H., Shen F.W., DiMaio W., et al. Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clin Orthop Relat Res (1999) 73
8. McKellop H., Shen F.W., Lu B., et al. Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements. J Orthop Res 17 (1999) 157
9. Yamaguchi M., Bauer T.W., and Hashimoto Y. Three-dimensional analysis of multiple wear vectors in retrieved acetabular cups. J Bone Joint Surg Am 79 (1997) 1539
10. Nevelos J., Ingham E., Doyle C., et al. Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns. J Arthroplasty 15 (2000) 793
11. Stewart T.D., Tipper J.L., Insley G., et al. Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation. J Biomed Mater Res B Appl Biomater 66 (2003) 567
12. Yamaguchi M., Hashimoto Y., Akisue T., et al. Polyethylene wear vector in vivo: a three-dimensional analysis using retrieved acetabular components and radiographs. J Orthop Res 17 (1999) 695
13. Mak M.M., Besong A.A., Jin Z.M., et al. Effect of microseparation on contact mechanics in ceramic-on-ceramic hip joint replacements. Proc Inst Mech Eng [H] 216 (2002) 403
14. Birman M.V., Noble P.C., Conditt M.A., et al. Cracking and impingement in ultra-high-molecular-weight polyethylene acetabular liners. J Arthroplasty 20 (2005) 87
15. Hood R.W., Wright T.M., and Burstein A.H. Retrieval analysis of total knee prostheses: a method and its application to 48 total condylar prostheses. J Biomed Mater Res 17 (1983) 829
16. Conditt M.A., Thompson M.T., Usrey M.M., et al. Backside wear of polyethylene tibial inserts: mechanism and magnitude of material loss. J Bone Joint Surg Am 87 (2005) 326
17. Cobb T.K., Morrey B.F., and Ilstrup D.M. Effect of the elevated-rim acetabular liner on loosening after total hip arthroplasty. J Bone Joint Surg Am 79 (1997) 1361
18. Shon W.Y., Baldini T., Peterson M.G., et al. Impingement in total hip arthroplasty a study of retrieved acetabular components. J Arthroplasty 20 (2005) 427
19. Urquhart A.G., D'Lima D.D., Venn-Watson E., et al. Polyethylene wear after total hip arthroplasty: the effect of a modular femoral head with an extended flange-reinforced neck. J Bone Joint Surg Am 80 (1998) 1641
20. Hall R.M., Siney P., Unsworth A., et al. Prevalence of impingement in explanted Charnley acetabular components. J Orthop Sci 3 (1998) 204
21. Chen P.Y., Wu C.T., Hou C.H., et al. Loosening of total hip arthroplasty with a prosthesis employing a skirted femoral head. J Formos Med Assoc 104 (2005) 370
22. Krushell R.J., Burke D.W., and Harris W.H. Range of motion in contemporary total hip arthroplasty. The impact of modular head-neck components. J Arthroplasty 6 (1991) 97
23. Yamaguchi M., Akisue T., Bauer T.W., et al. The spatial location of impingement in total hip arthroplasty. J Arthroplasty 15 (2000) 305
24. Griffith M.J., Seidenstein M.K., Williams D., et al. Socket wear in Charnley low friction arthroplasty of the hip. Clin Orthop Relat Res (1978) 37
25. Kim Y.H., and Kim V.E. Uncemented porous-coated anatomic total hip replacement. Results at six years in a consecutive series. J Bone Joint Surg Br 75 (1993) 6
26. Schmalzried T.P., and Huk O.L. Patient factors and wear in total hip arthroplasty. Clin Orthop Relat Res (2004) 94
27. Scott D.L., Campbell P.A., McClung C.D., et al. Factors contributing to rapid wear and osteolysis in hips with modular acetabular bearings made of hylamer. J Arthroplasty 15 (2000) 35
28. Williams II V.G., Whiteside L.A., White S.E., et al. Fixation of ultrahigh-molecular-weight polyethylene liners to metal-backed acetabular cups. J Arthroplasty 12 (1997) 25
29. Bartel D.L., Bicknell V.L., and Wright T.M. The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg Am 68 (1986) 1041
30. Bono J.V., Sanford L., and Toussaint J.T. Severe polyethylene wear in total hip arthroplasty. Observations from retrieved AML PLUS hip implants with an ACS polyethylene liner. J Arthroplasty 9 (1994) 119
31. Patil S., Bergula A., Chen P.C., et al. Polyethylene wear and acetabular component orientation. J Bone Joint Surg Am 85-A Suppl 4 (2003) 56