Elastic moduli and stiffness optimization in four-point bending of wood-based sandwich panel for use as structural insulated walls and floors

Journal of Wood Science

Volumn 52, Issue 4, 2006, Pages 302-310

  Kawasaki, Tamami ^a   Zhang, Min ^a   Wang, Qian ^b   Komatsu, Kohei ^a   Kawai, Shuichi ^a  

^a KYOTO UNIVERSITY   (Japan)

^b Hokushin Co Ltd   (Japan)

Author keywords

Bending property; Low density fiberboard; Optimum design analysis; Structural insulation wall floor; Wood based sandwich panel

Indexed keywords

ELASTIC MODULI; FLOORS; INSULATING MATERIALS; WALLS (STRUCTURAL PARTITIONS); WOODEN CONSTRUCTION;

BENDING PROPERTY; LOW-DENSITY FIBERBOARD; OPTIMUM DESIGN ANALYSIS; STRUCTURAL INSULATION WALL/FLOOR; WOOD-BASED SANDWICH PANEL;

SANDWICH STRUCTURES;

ELASTIC STRENGTH; FLOORS; INSULATION; WALLS; WOOD;

EID: 33746740031     PISSN: 14350211     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10086-005-0766-z     Document Type: Article

References (24)

1. Kawasaki T, Zhang M, Kawai S (1998) Manufacture and properties of ultra-low density fiberboard. J Wood Sci 44:354-360
2. Structural Board Association (2000) OSB performance by design - OSB in wood frame construction (Canadian edition). Structural Board Association, Ontario
3. Gibson LJ, Ashby MF (1997) The design of sandwich panels with foam cores. In: Clarke DR, Suresh S, Ward FRSIM (eds) Cellular solids. Cambridge University Press, Cambridge, pp 345-386
4. Wang Q, Sasaki H, Yang P, Kawai S (1992) Utilization of laminated-veneer-lumber from Sabah plantation thinnings as beam flanges. III. Production of composite beam and its properties. Mokuzai Gakkaishi 38:914-922
5. Zhang M, Kawasaki T, Yang P, Honda T, Kawai S (1996) Manufacture and properties of composite fiberboard III. Properties of three-layered bamboo-wood composite boards and stress analysis by the Finite Element Method. Mokuzai Gakkaishi 42:854-861
6. Kawasaki T, Zhang M, Kawai S (1999) Sandwich panel of veneer-overlaid low-density fiberboard. J Wood Sci 45:291-298
7. Kawasaki T, Kwang H, Komatsu K, Kawai S (2003) In-plane shear properties of the wood-based sandwich panels as a small shear wall, evaluated by the shear test method using tie-rods. J Wood Sci 49:199-209
8. Kawasaki T, Kawai S (2006) Thermal insulation properties of wood-based sandwich panel for use as structural insulated walls ans floors. J Wood Sci 52:75-83
9. Allen HG (1969) Analysis and design of structural sandwich panels. Pergamon, Oxford
10. Arima T, Okuma M (1970) Studies on compound used injected and foamed polyurethane resin as core. I (in Japanese). Mokuzai Kogyo 25:267-268
11. Okuma M, Arima T (1970) Studies on compound used injected and foamed polyurethane resin as core. II (in Japanese). Mokuzai Kogyo 25:418-420
12. Vinson JR (1999) The behavior of sandwich structures of isotropic and composite materials. Technomic, Pennsylvania
13. Carlson LA, Nordstrand T, Westerlind B (2001) On the elastic stiffness of corrugated core sandwich. J Sandw Struct Mater 3:253-267
14. Whitney JM (2001) A local model for bending of weak core sandwich plates. J Sandw Struct Mater 3:269-288
15. Swanson SR, Kim J (2002) Optimization of sandwich beams for concentrated loads. J Sandw Struct Mater 4:273-293
16. Gupta N, Woldesenbet E, Kishore, Sankaran S (2002) Response of syntactic foam core sandwich structured composites to three-point bending. J Sandw Struct Mater 4:249-272
17. JAS (2000) JAS for structural plywood, Ministry of Agriculture, Forestry and Fisheries, Tokyo
18. Sasaki H (1991) Development of continuous press with steam-injection heating from both sides. Report for the Grant-in-Aid for Scientific Research (No. 01860023) from the Ministry of Education, Science and Culture of Japan
19. JIS (1994) JIS A 1414 Methods of performance test of panels for building construction. Japanese Standard Association, Tokyo
20. JIS (2003) JIS A 5905 Fiberboards. Japanese Standard Association, Tokyo
21. JIS (2003) JIS A 5908 Particleboards. Japanese Standard Association, Tokyo
22. JAS (2003) JAS for structural panel. Ministry of Agriculture, Forestry, and Fisheries, Tokyo
23. Triantafillou TC, Gibson LJ (1987) Failure mode maps for foam core sandwich beams. Mat Sci Eng 95:37-53
24. Triantafillou TC, Gibson LJ (1987) Minimum weight design of foam core sandwich panels for a given strength. Mat Sci Eng 95:55-62