Critical data evaluation of the aluminium-nickel-titanium system

Intermetallics

Volumn 14, Issue 10-11, 2006, Pages 1304-1311

  Schuster, Julius C ^a  

^a UNIVERSITY OF VIENNA   (Austria)

Author keywords

A. Ternary alloy systems; B. Phase diagrams

Indexed keywords

DATA ACQUISITION; PHASE DIAGRAMS; TERNARY SYSTEMS;

CRITICAL DATA EVALUATION; TERNARY ALLOY SYSTEMS;

ALUMINUM ALLOYS;

EID: 33746706801     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2005.11.027     Document Type: Article

References (125)

1. Kitabjian P.H., and Nix W.D. Acta Mater 46 (1998) 701-710 [lattice parameter of NiAl vs composition]
2. Strutt P.R., and Polvani R.S. Scripta Met 7 (1973) 1221-1226 [creep strength of NiAl alloys]
3. Polvani R.S., Tzeng W.S., and Strutt P.R. Metall Trans A 7A (1976) 33-40 [creep strength of NiAl alloys]
4. Strutt P.R., Polvani G., and Ingram J.C. Metall Trans A 7A (1976) 23-31 [creep strength of NiAl aloys]
5. Zhang J., Su X., Strom E., Zhong Z., and Li C. Mater Sci Eng A329-A331 (2002) 499-503 [effect of Ni alloying on mech. prop of TiAl]
6. Goward G.W., and Boone D.H. Oxid Met 3 (1971) 475-495 [NiAl coatings]
7. Goward G.W. Surf Coat Technol 108-109 (1998) 73-79 [NiAl coatings]
8. Qin Z.X., Chen Z.Z., Tong Y.Z., Ding X.M., Hu X.D., Yu T.J., et al. Appl Phys A78 (2004) 729-731 [Ti/Al/Ni/Au - metallizations on n-GaN]
9. Asaoka T. Mater Sci Res Int 8 (2002) 231-236 [effect of Al in NiTi]
10. Lee K.J., and Nash P. J Phase Equilibria 12 (1991) 551-562 [assessment, isotherms at 800, 900, and 1150 °C, liquidus projection]
11. Budberg P.B. In: Petzow G., and Effenberg G. (Eds). Ternary alloys vol. 7 (1993), VCh, Weinheim, Germany 7-21 [assessment, isotherms at 800, 1025, and 1150 °C, liquidus projection]
12. 3Ti]
13. Bellen P., Kumar H., and Wollants P. Z Metallkd 87 (1996) 972-978 [assessment of Ni-Ti binary]
14. Schuster JC, Palm M. J Phase Equilibria Diff, in press [assessment on Ti-Al binary].
15. Schuster JC. Paper presented at COST535 meeting, Paris; March 2004 [assessment on Ni-Al binary].
16. Eleno L, Frisk K, Schneider A. Intermetallics, in this issue [assessment of Al-Ni-Fe ternary].
17. Nash P.G., Vejins V., and Liang W.W. Bull Alloy Phase Diagr 3 (1982) 367-374 [assessment, isotherms at 750, 800, and 1027 °C, liquidus projection]
18. 2TiAl alloys]
19. Oh-ishi K., Tian W.H., Sano T., and Nemoto M. Nippon Kinzoku Gakkaishi 60 (1996) 239-246 [Ni-rich corner, isotherm at 900 °C, vertical section NiAl-NiTi]
20. Simonsson R. Project report (KTH, Stockholm, Sweden - INPG, Grenoble, France); 1990 [vertical section NiAl-NiTi, liquidus projection for >50 at% Ni].
21. 2TiAl]
22. Taylor A., and Floyd R.W. J Inst Met 81 (1952/1953) 25-32 [isotherms of the Ni-rich section at 750, 850, 1000, and 1150 °C]
23. Huneau B., Rogl P., Zeng K., Schmid-Fetzer R., Bohn M., and Bauer J. Intermetallics 7 (1999) 1337-1345 [isotherm at 900 °C]
24. Maniar G.N., and Bridge J.E. Metallography 5 (1972) 91-93 [lattice parameter misfit]
25. Mishima Y., Ochiai S., and Suzuki T. Acta Metall 33 (1985) 1161-1169 [lattice parameter misfit]
26. 2TiAl at 1100 °C]
27. 2TiAl vs Ti content]
28. 2 equilibria at 900 °C]
29. Hashimoto K., Doi H., Tsujimoto T., and Suzuki T. Mater Trans JIM 32 (1991) 574-579 [site occupation in Ni doped TiAl]
30. Doi H., Hashimoto K., Kasahara K., and Tsujimoto T. J Jpn Inst Met 56 (1992) 232-237 [site occupation in Ni doped TiAl]
31. Hao Y.L., Xu D.S., Cui Y.Y., Yang R., and Li D. Acta Mater 47 (1999) 1129-1139 [site preference of Ni in TiAl]
32. Nakajima H., Kadowaki H., Ikeda T., Inui H., and Yamaguchi M. In: Naka M. (Ed). Proceedings of the international conference on designing of interfacial structures, DIS'02 (2002), JWRI, Osaka University, Osaka, Japan 417-424 [Ni diffusion in TiAl]
33. 2Ti]
34. 1]
35. 1]
36. Ding J.J., Rogl P., and Schmidt H. J Alloys Compd 317-318 (2001) 379-384 [except Al-rich section isotherm at 600 °C, some addl. data points for isotherm at 900 °C]
37. Grytsiv A., Ding J.J., Rogl P., Weill F., Chevalier B., Etourneau J., et al. Intermetallics 11 (2003) 351-359 [crys. structure]
38. Rogl P. Personal communication; November 2003.
39. Taylor A. Trans AIME J Met 8 (1956) 1356-1362 [isotherms at 750 °C, 1000 °C]
40. Sridharan S., Nowotny H., and Wayne S.F. Monatsh Chem 114 (1983) 127-135 [isotherm at 1100 °C]
41. Nash P., and Liang W.W. Met Trans 16A (1985) 319-322 [isotherm at 900 °C, liquidus projection]
42. 2TiAl equilibria at 900 °C, exp. and thermodyn. modeled]
43. 2TiAl composites, isotherm at 900 °C]
44. Zeng K., Schmid-Fetzer R., Huneau B., Rogl P., and Bauer J. Intermetallics 7 (1999) 1347-1359 [thermodyn. modeling, isotherms at 800, 900, 1200 °C, liquidus projection]
45. Jia C.C., Ishida K., and Nishizawa T. Metall Mater Trans 25A (1994) 473-485 [Ni-rich corner, isotherms at 1100 °C, 1300 °C]
46. 2TiAl region, isotherms at 800, 900, and 1000 °C, exp. and CVM calculations]
47. Jia C.C., Ishida K., and Nishizawa T. Rare Met (Beijing) 19 (2000) 110-117 [in Chinese] [exp. isotherms at 900, 1000, 1100, 1200, and 1300 °C, thermodyn. modeling]
48. Karunaratne M.S.A., Carter P., and Reed R.C. Acta Mater 49 (2001) 861-875 [diffusion couples, Ni-rich section, isotherms at 900, 1000, 1100, 1200 °C]
49. Miura S., Hong Y.M., Suzuki T., and Mishima Y. J Phase Equilibria 20 (1999) 193-198 [(Ni) solvus and liquidus]
50. 3Ti]
51. 3Ti]
52. Kainuma R., Urushiyama K., Ishikawa K., Jia C.C., Ohnuma I., and Ishida K. Mater Sci Eng A239-A240 (1997) 235-244 [vertical section NiAl-NiTi]
53. Ishikawa K., Kainuma R., Ohnuma I., Aoki K., and Ishida K. Acta Mater 50 (2002) 2233-2243 [ordering and phase separation in the section NiAl-NiTi]
54. Thompson E.R., and Lemkey F.D. Trans ASME 62 (1969) 140-154 [Ni-rich section, liquidus]
55. Haour G., Mollard F., Lux B., and Wright I.G. Z Metallkd 69 (1978) 149-154 [Ni-rich ternary eutectic]
56. Willemin P, Durand-Charre M, Ansara I. Report EUR 10567; 1986 (pt. 2):955-64.
57. Willemin P., and Durand-Charre M. J Mater Sci 25 (1990) 168-174 [Ni-rich section, isotherm at 1250 °C, liquidus surface]
58. Kamei K., Yakushiji M., and Keo T. Light Met Alloys 2 (1961-1963) 31-35 [Al-rich corner]
59. Omarov A.K., Seitzhanov S.V., and Idirisov A.I. Vestn Akad Nauk Kazakh SSR 12 (1985) 48-51 [Al-rich section, liquidus]
60. Omarov A.K., Seitzhanov S.V., and Idirisov A.I. Izv Akad Nauk Kazakh SSR, Ser Khim 1 (1985) 36-42 [Al-rich section, isotherms at 600, 800, 1000, and 1150 °C, liquidus]
61. Raman A., and Schubert K. Z Metallkd 56 (1965) 99-104 [isotherm at 800 °C, crys. structure]
62. Markiv V.Y., Burnashova V.V., and Ryabov V.R. Metallofizika 46 (1973) 103-110 [isotherm at 800 °C]
63. 6.5, isotherm at 1200 °C]
64. 6.5 at 1000 °C]
65. Xu H., and Jin Z. Trans Nonferrous Met Soc China 7 (1997) 24-29 [diffusion couples, isotherm at 927 °C]
66. 10-y) (0 ≤ y ≤ 10)]
67. Kainuma R., Fujita Y., Mitsui H., Ohnuma I., and Ishida K. Intermetallics 8 (2000) 855-867 [equilibria between α(Ti), β(Ti) and TiAl at 1000, 1200, and 1300 °C]
68. Kubaschewski O. Trans Faraday Soc 54 (1958) 814-820 [thermodyn. data, calorimetry]
69. 3Al]
70. Kapala J., Kath D., and Hilpert K. Metall Mater Trans 27A (1996) 2673-2677 [thermodyn. data, Knudsen]
71. Du Y., Chang Y.A., Huang B., Gong W., Jin Z., Xu H., et al. Mater Sci Eng A363 (2003) 140-151 [review, impurity diffusivity in Al]
72. Koppers M., Herzig C., Friesel M., and Mishin Y. Acta Mater 45 (1997) 4181-4191 [Al diffusion in αTi]
73. Lee C.G., Young K.T., and Lee Y.I. Metals Mater Processes 15 (2003) 343-356 [Al and Ni diffusion in βTi]
74. Araki H., Minamino Y., Yamane T., Shirai Y., and Miyamoto Y. Diffus Defects Data Pt A: Defect Diffus Forum 143-147 Pt. 1 (1997) 125-130 [Ni diffusion in βTi]
75. 3Al]
76. Przeorski T., Fiesel M., Hisker F., Divinski S.V., and Herzig C. Diffus Defects Data Pt A: Defect Diffus Forum 194-199 Pt. 1 (2001) 493-498 [Ni diffusion in TiAl]
77. 3Al]
78. 3Al]
79. 3Al]
80. 3Al]
81. 3Al]
82. 3Al]
83. Minamino Y., Koizumi Y., Tsuji N., and Yokoyama S. Koon Gakkaishi 28 (2002) 323-328 [in Japanese] [Ti diffusion in NiAl]
84. Kaufman L., and Nesor H. Met Trans 5 (1974) 1623-1629 [thermodynamic modeling]
85. Ansara I., Bernard C., Kaufman L., and Spencer P. Calphad 2 (1978) 1-15 [thermodynamic modeling, isotherm at 1600 K]
86. Dupin N. PhD thesis. France, Grenoble: Institut National Polytechnique de Grenoble; 1995 [thermodyn. description].
87. Kao C.R., Pike L.M., Chen S.L., and Chang Y.A. Intermetallics 2 (1994) 235-247 [thermodyn. modeling, site preference of Ti in NiAl]
88. Tso N.C., Sanchez J.M., and Tien J.K. In: Tien J.K., and Coulfield T. (Eds). Superalloys, supercomposites, and superceramics (1989), Academic Press, San Diego, CA, USA 525-542 [CVM calculations]
89. Sanchez J.M. NATO ASI Ser E Appl Sci 256 (1994) 139-148 [ab initio calculations]
90. 3Al]
91. Burton B., and Carter W.C. In: Yavari A.R. (Ed). Ordering disord. alloys [Proc. Eur. workshop ordering disord.] (1992), Elsevier, London, UK 223-228 [LMTO calculations]
92. Burton B.P., Osburn J.E., and Pasturel A. Phys Rev B45 (1992) 7677-7683 [ab initio calculations, heats of formation]
93. Watson R.E., and Weinert M. Phys Rev B58 (1998) 5981-5988 [ab initio calculations, heat of formation]
94. Lin W., and Freeman A.J. Phys Rev B45 (1992) 61-68 [ab initio calculations, lattice parameters of τ4]
95. Peters M.A., and Humphreys C.J. In: Nathal M.V. (Ed). Structural intermetallics (1997), TMS, Warrendale, PA., USA 605-612 [CVM calculations]
96. Tso N.C., and Sanchez J.M. Mater Res Soc Symp Proc 133 (1989) 63-68 [CVM calculations]
97. Bozzolo G., and Ferrante J. J Comput Aided Mater Design 2 (1995) 113 [ab initio calculations, site occupation in NiAl]
98. Bozzolo G., Noebe R.D., and Honecy F. Intermetallics 8 (2000) 7-18 [ab initio calculations, site preference in NiAl]
99. Bozzolo G., Noebe R.D., and Garces J.E. Scr Mater 42 (2000) 403-408 [ab initio calculations, site preference in NiAl]
100. Bozzolo G.H., Noebe R.D., and Amador C. Intermetallics 10 (2002) 149-159 [ab initio calculations]
101. Fu C.L., and Zhou J. Acta Mater 44 (1996) 1471-1478 [ab initio calculations of site preferences in NiAl]
102. Medvedeva N.I., Gornostyrev Y.N., Novikov D.L., Mryasov O.N., and Freeman A.J. Acta Mater 46 (1998) 3433-3442 [ab initio calculations of site preference in NiAl]
103. Song Y., Guo Z.X., Yang R., and Li D. Acta Mater 49 (2001) 1647-1654 [ab initio calculations of site preferences in NiAl]
104. Hao Y.L., Yang R., Song Y., Cui Y.Y., Li D., and Niinomim M. Mater Sci Eng A365 (2004) 85-89 [ab initio calculations, site occupation in NiAl]
105. th world conference on titanium (1989), Cannes, France: Soc. Fr. Metallurgie, Paris, France 943-948 [ab initio calculations of site preferences in Ti3A1]
106. Wolf W., Podloucky R., and Rogl P. Mater Res Soc Symp Proc 364 (1995) 1005-1010
107. Ding J.J., Schweiger H., Wolf W., Rogl P., Vogtenhuber D., and Podloucky R. In: Kim Y.W., Dimiduk D.M., and Loretto M.H. (Eds). Gamma titanium aluminides (1999), TMS, Warrendale, PA. USA 141-147
108. Nandy T.K., Banerjee D., and Gogia A.K. Scripta Met 24 (1990) 2019-2022 [modeling of site occupation in Ni doped TiAl]
109. In: Massalski T.B. (Ed). Binary alloy phase diagrams. 2nd ed. (1990), TMS, Warrendale, PA., USA
110. 3]
111. 3]
112. 4]
113. Bradley A.J., and Taylor A. Proc R Soc London A159 (1937) 56-72 [crys. structure of NiAl]
114. 3)
115. 3Al]
116. van Loo F.J.J., and Rieck G.D. Acta Metall 21 (1973) 73-84 [Ti-Al binary data]
117. Braun J., and Ellner M. Metall Mater Trans 23A (2001) 1037-1047 [Ti-Al binary data]
118. Schuster J.C., and Ipser H. Z Metallkd 81 (1990) 389-396 [Ti-Al binary data]
119. 5]
120. Mabuchi H., Asai T., and Nakayama Y. Scripta Met 23 (1989) 685-689 [Ti-Al binary data]
121. Duwez P., and Taylor J.L. Trans AIME J Met 194 4(1) (1952) 70-71 [crys. structure of TiAl]
122. Braun J., Ellner M., and Predel B. Z Metallkd 86 (1995) 870-876 [crys. structure of TiAl]
123. 3Al]
124. Kripyakevich P.I., Markiv V.Y., and Troyan A.O. Dop Akad Nauk Ukr RSR 7 (1964) 922-924 [crys. structure]
125. 2 at 1000 °C; Ti solubility in NiAl]