Computational prediction of a slightly heated turbulent rectangular jet discharged into a narrow channel crossflow using two different turbulence models

International Journal of Heat and Mass Transfer

Volumn 49, Issue 21-22, 2006, Pages 3914-3928

  Pathak, Manabendra ^a   Dewan, Anupam ^a   Dass, Anoop K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI   (India)

Author keywords

Crossflow; Heated jet; Reynolds stress transport model; Turbulent mixing; Vortices

Indexed keywords

CHANNEL FLOW; COMPUTATION THEORY; MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBULENT FLOW; VORTEX FLOW;

CROSSFLOW; HEATED JETS; REYNOLDS-STRESS TRANSPORT MODEL; TURBULENT MIXING;

JETS;

CHANNEL FLOW; COMPUTATION THEORY; JETS; MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBULENT FLOW; VORTEX FLOW;

EID: 33746256930     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2006.05.001     Document Type: Article

References (46)

1. R.J. Margason, Fifty years of jet in cross-flow research, AGARD-CP 534, 1993.
2. Holdeman J.D. Mixing of multiple jets with a confined subsonic crossflow. Energy Combust. Sci. 19 (1993) 31-70
3. Sherif S.A., and Pletcher R.H. The physical and thermal characteristics of the subsonic jet in a cross stream- a review. Mixed Convect. Environ. Flows 152 (1990) 83-94
4. Acharya S., Tyagi M., and Hoda A. Flow and heat transfer predictions for film cooling, heat transfer in gas turbine systems. Ann. NY Acad. Sci. 934 (2001) 110-125
5. Demuren A.O. Modeling turbulent jets in cross flow. In: Cheremisinoff N.P. (Ed). Encyclopedia of fluid mechanics vol. 2 (1986), Gulf Publishing Company, Houston, TX (Chapter 17)
6. Sherif S.A., and Pletcher R.H. Jet-wake thermal characteristics of heated turbulent jets in crossflow. J. Thermophys. 5 (1991) 181-191
7. Said N.M., Mhiri H., Palec G.L., and Bournot P. Experimental and numerical analysis of pollutant dispersion from a chimney. Atmos. Environ. 39 (2005) 1727-1738
8. Fric T.F., and Roshko A. Vortical structures in the wake of a transverse jet. J. Fluid Mech. 279 (1994) 1-47
9. Kelso R.M., Lim T.T., and Perry A.E. An experimental study of round jets in crossflow. J. Fluid Mech. 306 (1996) 111-144
10. Andreopoulos J., and Rodi W. Experimental investigation of jets in a cross-flow. J. Fluid Mech. 138 (1984) 93-127
11. Yuan L.L., Street R.L., and Ferziger J.H. Large eddy simulations of a round jet in crossflow. J. Fluid Mech. 379 (1999) 71-104
12. Sau A., Sheu T.W.H., Hwang R.R., and Yang W.C. Three-dimensional simulation of square jets in cross-flow. Phys. Rev. E 69 (2004) 066302-1-066302-20
13. T.T. Lim, R.M. Kelso, A.E. Perry, A study of a round jet in cross-flow at different velocity ratios, in: 11th Australian Fluid Mech. Conf., University of Tasmania, Hobart, Australia, 1992.
14. Peterson S.D., and Plesniak M.W. Short-hole jet in crossflow velocity field and its relationship to film cooling performance. Exp. Fluids 33 (2002) 889-898
15. Peterson S.D., and Plesniak M.W. Evolution of jets emanating from short holes into crossflow. J. Fluid Mech. 503 (2004) 57-91
16. Haven B.A., and Kurosaka M. Kidney and anti-kidney vortices in crossflow jets. J. Fluid Mech. 352 (1997) 27-64
17. D.M. Kuzo, An experimental study of the turbulent transverse jet, Ph.D. thesis, California Institute of Technology 1995.
18. Hale C.A., Plesniak M.W., and Ramadhyani S. Structural features and surface heat transfer associated with a row of short-hole jets in cross-flow. Int. J. Heat Fluid Flow 21 (2000) 542-553
19. Liscinsky D.S., True B., and Holdeman J.D. Crossflow mixing of noncircular jets. J. Propul. Power 12 (1996) 225-230
20. M.J. Findlay, P. He, M. Salcudean, I.S. Gartshore, A row of streamwise inclined jets in crossflow: measurement and calculations, ASME-96-GT-167, 1996.
21. Ajersch P., Ketler S., Zhou J.M., Gartshore I., and Salcudean M. Multiple jets in cross-flow: measurements and numerical simulations. ASME J. Turbomach. 119 (1997) 330-342
22. Hoda A., and Acharya S. Predictions of a film coolant jet in crossflow with different turbulence models. ASME J. Turbomach. 122 (2000) 558-569
23. Keimasi R., and Rahni T. Numerical simulation of jets in a crossflow using different turbulence models. AIAA J. 39 (2001) 2268-2277
24. Weston R.P., and Thames F.C. Properties of aspect-ratio-4.0 rectangular jets in subsonic crossflow. J. Aircraft 16 (1979) 701-707
25. Humber A.J., Grandmaison E.W., and Pollard A. Mixing between a sharp-edged rectangular jet and transverse cross flow. Int. J. Heat Mass Transfer 36 (1993) 4307-4316
26. I. Vincenti, G. Guj, R. Camussi, E. Giulietti, PIV study for the analysis of planar jets in crossflow at low Reynolds number, in: ATTI 11th Convegno Nazionale AIVELA, Ancona, December 2-3, 2003.
27. Plesniak M.W., and Cusano D.M. Scalar mixing in a confined rectangular jet in crossflow. J. Fluid Mech. 524 (2005) 1-45
28. Wark C.E., and Foss J.F. Thermal measurement for jets in disturbed and undisturbed crosswind conditions. AIAA J. 26 (1988) 901-902
29. Chen K.S., and Hwang J.Y. Experimental study on the mixing of one and dual-line heated jets with a cold cross-flow in a confined channel. AIAA J. 29 (1991) 353-360
30. Nishiyama H., Ota T., Hamada M., and Takahashi Y. Temperature fluctuations in a slightly heated slot jet issuing into a crossflow. Expt. Therm. Fluid Sci. 6 (1993) 252-262
31. Sarkar S., and Bose T.K. Comparison of different turbulence models for prediction of slot-film cooling: flow and temperature field. Numer. Heat Transfer, Part B 28 (1995) 217-238
32. Hwang R.R., and Chiang T.P. Numerical simulation vertical forced plume in a cross flow of stably stratified fluid. ASME J. Fluid Eng. 117 (1995) 696-705
33. Shi Y., Ray M.B., and Mujumdar A.S. Numerical study on the effect of cross-flow on turbulent flow and heat transfer characteristics under normal and oblique semi-confined impinging slots jets. Drying Technol. 21 (2003) 1923-1939
34. Said N.M., Mhiri H., Golli S.E., Palec G.L., and Bournot P. Three-dimensional numerical calculations of jet in an external cross flow: application to pollutant dispersion. ASME J. Heat Transfer 125 (2003) 510-522
35. Haniu H., and Ramaprian B.R. Studies on two-dimensional curved non-buoyant jets in crossflow. ASME J. Fluids Eng. 111 (1989) 78-86
36. B.R. Ramaprian, H. Haniu, Turbulence measurements in plane jets and plumes in cross-flow, Technical Report No. 266, IIHR, University of Iowa, Iowa, 1983.
37. Kalita K., Dewan A., and Dass A.K. Prediction of turbulent plane jet in crossflow. Numer. Heat Transfer, Part A 41 (2002) 1-12
38. Patankar S.V., Basu D.K., and Alpay S.A. Prediction of three-dimensional velocity field of a deflected turbulent jet. ASME J. Fluid Eng. 99 (1977) 758-762
39. Demuren A.O. Characteristics of three-dimensional turbulent jets in crossflow. Int. J. Eng. Sci. 31 (1993) 899-913
40. Ince N.Z., and Leschziner M.A. Calculation of single and multiple jets in crossflow with and without impingement using second-moment closure. Engineering Turbulence Modeling and Experiments (1990), Elsevier 155-164
41. N.Z. Ince, M.A. Leschziner, Computation of three-dimensional jets in cross-flow with and without impingement using Reynolds-stress transport closure, in: AGARD Sym. Computational and Experimental Assessment of Jets in Crossflow, Paper 23, 1993.
42. Jansson L.S., and Davidson L. Numerical study of effusion cooling in a double-row discrete-hole configuration using a low-Reynolds stress transport model. Engineering Turbulence Modeling and Experiments (1996), Elsevier 731-740
43. Speziale C.G., Sarkar S., and Gataski T.B. Modelling the pressure-strain correction of turbulence: an invariant dynamical systems approach. J. Fluid Mech. 227 (1991) 245-272
44. Lien F.S., and Leschziner M.A. Assessment of turbulent transport models including non-linear RNG eddy-viscosity formulation and second moment closure. Comput. Fluids 23 (1994) 983-1004
45. S. Sarkar, L. Balakrishnan, Application of a Reynolds-stress transport model to the compressible shear layer, ICASE Report 90-18, NASA CR 182002, 1990.
46. FLUENT 6.2, Users Guide, vol. 2, 2005, pp. 10.1-10.82.