Evolution of jets emanating from short holes into crossflow

Journal of Fluid Mechanics

Volumn 503, Issue , 2004, Pages 57-91

  Peterson, S D ^a   Plesniak, M W ^a  

^a PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BLOW MOLDING; BOUNDARY LAYERS; CHANNEL FLOW; JETS; SWIRLING FLOW; TRAJECTORIES; VORTEX FLOW;

DOWNSTREAM SPIRAL SEPARATION NODE (DSSN) VORTICES; PARTICLE IMAGE VELOCIMETRY (PIV);

FLUID MECHANICS;

CROSSFLOW; FLUID MECHANICS; JET; MODELING; ORIENTATION; PARTICLE IMAGE VELOCIMETER;

EID: 1842637701     PISSN: 00221120     EISSN: None     Source Type: Journal    
DOI: 10.1017/S0022112003007407     Document Type: Article

References (63)

1. ANDREOPOULOS, J. 1985 On the structure of jets in a crossflow. J. Fluid Mech. 157, 163-197.
2. ANDREOPOULOS, J. & RODI, W. 1984 Experimental investigation of jets in a crossflow. J. Fluid Mech. 138, 93-127.
3. BECKER, H. A. & MASSARO, T. A. 1968 Vortex evolution in a round jet. J. Fluid Mech. 31, 435-448.
4. BOYCE, W. E. & DIPRIMA, R. C. 1997 Elementary Differential Equations and Boundary Value Problems, 6th edn. John Wiley.
5. BRIZZI, L. E., FOUCAULT, E., BERNARD, A. & BOUSGARBIES, J. L. 1997 In the vicinity of a jet in a cross-flow. FEDSM97-3083, June 1997, CD-ROM.
6. BROADWELL, J. E. & BREIDENTHAL, R. E. 1984 Structure and mixing of a transverse jet in incompressible flow. J. Fluid Mech. 148, 405-412.
7. BRUNDAGE, A. L., PLESNIAK, M. W. & RAMADHYANI, S. 1999 Influence of coolant feed direction and hole length on film cooling jet velocity profiles. ASME 99-GT-35.
8. BURD, S. & SIMON, T. 1998 Measurements in film cooling flows: hole L / D and turbulence intensity effects. ASME J. Turbomach. 120, 791-798.
9. CATER, J. & SORIA, J. 2001 PIV measurements of turbulent jets. 4th Intl Symp. on Particle Image Velocimetry, Göttingen, Germany, p. 1019.
10. CHANG, H. C. 1942 Aufrollung Eines Zylindrishen Strahles Durch Querwind. Doctoral Dissertation, Univ. of Gottingen, 1942; English translation: The roll-up of a cylindrial jet in a crossflow, by K. S. Nagaraja & H. O. Schrade. USAF-ARL 73-0131, Sept. 1973.
11. COLLADAY, R. S. & RUSSELL, L. M. 1976 Streakline flow visualization of discrete hole film cooling with normal, slanted, and compound angle injection. NASA TN D-8248.
12. CRABB, D., DURAO, D. F. G. & WHITELAW, J. H. 1981 A round jet normal to a crossflow. J. Fluids Engng 103, 142-153.
13. CUSANO, D. M. & PLESNIAK, M. W. 1999 Asymmetry in a confined rectangular jet in crossflow. Proc. of Turbulence and Shear Flow Phenomena (ed. S. Banerjee & J. K. Eaton), Santa Barbara, CA, Paper No. 1-242.
14. DRING, R. P. 1982 Sizing criteria for laser anemometry particles. J. Fluids Engng 104, 15-17.
15. FOSS, J. 1980 Interaction region phenomena for the jet in a cross-flow problem. Rep. SFB 80/E/161, University of Karlsruhe.
16. FRIC, T. F. & ROSHKO, A. 1989 Structure in the near field of the transverse jet. Seventh Symp. on Turbulent Shear Flows. Stanford University, 21-23 August.
17. FRIC, T. F. & ROSHKO, A. 1994 Vortical structure in the wake of a transverse jet. J. Fluid Mech. 279, 1-47.
18. GORDIER, R. L. 1959 Studies of fluid jets discharging into moving liquid. St Anthony Falls Hydrodynamics Lab., University of Minnesota, Tech. Paper 28, ser. B.
19. HALE, C. A. 1999 An experimental and numerical study of the hydrodynamics and surface heat transfer associated with short film cooling holes fed by a narrow plenum. PhD thesis, Purdue University.
20. HALE, C. A., PLESNIAK, M. W. & RAMADHYANI, S. 2000a Film cooling effectiveness for short holes fed by a narrow plenum. ASME J. Turbomach. 122, 553-557.
21. HALE, C. A., PLESNIAK, M. W. & RAMADHYANI, S. 2000b Structural features and surface heat transfer associated with a row of short-hole jets in crossflow. Intl J. Heat Fluid Flow 21, 542-553.
22. HALE, C. A., PLESNIAK, M. W. & RAMADHYANI, S. 1999a Structural features and surface heat transfer associated with a row of short-hole jets in crossflow. Proc. of Turbulence and Shear Flow Phenomena (ed. S. Banerjee & J. K. Eaton), Santa Barbara, CA, pp.691-696.
23. HALE, C. A., RAMADHYANI, S. & PLESNIAK, M. W. 1999b Film cooling effectiveness predictions for short holes fed by a narrow plenum. ASME IGTI Turbo Expo 99, Indianapolis, IN, paper no. 99-GT-162.
24. HASSELBRINK, E. F. & MUNGAL, M. G. 2001a Transverse jets and jet flames. Part 1. Scaling laws for strong transverse jets. J. Fluid Mech. 443, 1-25.
25. HASSELBRINK, E. F. & MUNGAL, M. G. 2001b Transverse jets and jet flames. Part 2. Velocity and OH field imaging. J. Fluid Mech. 443, 27-68.
26. HOLDEMAN, J. D. 1993 Mixing of multiple jets with a confined subsonic crossflow. Energy Combust. Sci. 19, 31-70.
27. JOHNSTON, J. P. & KHAN, Z. 1997 The origins of the dominant vortex from a pitched and skewed jet. Paper 1201 (session keynote lecture), Intl Conf. on Fluids Engng, JSME, Tokyo, 13-16 July.
28. JOHNSTON, J. P., MOSIER, B. P. & KHAN, Z. U. 2001 Effects of inlet conditions on skewed and pitched jets in cross-flow. 2nd Intl Symp. on Turbulent Shear Flow Phenomena, Stockholm, 27-29 June.
29. KAMOTANI, Y. & GREBER, I. 1972 Experiments on a turbulent jet in a cross-flow. AIAA J. 10, 1425-1429.
30. KELSO, R. M., LIM, T. T. & PERRY, A. E. 1996 An experimental study of round jets in cross-flow. J. Fluid Mech. 306, 111-144.
31. KELSO, R. M. & SMITS, A. J. 1995 Horseshoe vortex systems resulting from the interaction between a laminar boundary layer and a transverse jet. Phys. Fluids 7, 153-158.
32. KHAN, Z. U. & JOHNSTON, J. P. 2000 On vortex generating jets. Intl J. Heat Fluid Flow 21, 505-511.
33. KOHLI, A. & THOLE, K. A. 1997 A CFD investigation on the effect of entrance flow conditions in discrete film cooling holes. ASME Proc. 32nd Natl Heat Transfer Conf. 12, 223-232.
34. KROTHAPALLI, A., LOURENCO, L. & BUCHLIN, J. M. 1990 Separated flow upstream of a jet in a crossflow. AIAA J. 28, 414-420.
35. KUZO, D. M. 1996 An experimental study of the turbulent transverse jet. PhD thesis, California Institute of Technology.
36. LEBROCO, P. V., LAUNDER, B. E. & PRIDDIN, C. H. 1973 Experiments on transpiration cooling. Proc. I MechE 187, 149-157.
37. LEMMON, C. A., KOHLI, A. & THOLE, K. A. 1999 Formation of counter-rotating vortices in film-cooling flows. ASME Paper 99-GT-161.
38. LEYLEK, J. H. & ZERKLE, R. D. 1994 Discrete-jet film cooling: a comparison of computations results with experiments. ASME J. Turbomach. 116, 358-368.
39. LOEHRKE, R. I. & NAGIB, H. M. 1976 Control of free-stream turbulence by means of honeycombs: a balance between suppression and generation. J. Fluids Engng 98, 342-353.
40. McGOVERN, K. T. & LEYLEK, J. H. 2000 A detailed analysis of film-cooling physics. Part II. Compound-angle injection with cylindrical holes. ASME J. Turbomach. 122, 113-121.
41. MARGASON, R.J. 1969 Analysis of the flow field of a jet in a subsonic crosswind. In Analytic Methods in Aircraft Aerodynamics. NASA SP 228, 683-702.
42. MARGASON, R. J. 1993 Fifty years of jet in cross-flow research. AGARD-CP 534, 1-41.
43. MOFFAT, R. 1988 Describing the uncertainties in experimental results. Exps. Therm. Fluid Sci. 1, 3-17.
44. MORTON, B. R. & IBBETSON, A. 1996 Jets deflected in a crossflow. Exps. Therm. Fluid Sci. 12, 112-133.
45. MOUSSA, Z. M., TRISCHKA, J. W. & ESKINAZI, S. 1977 The near field in the mixing of a round jet with a cross-stream. J. Fluid Mech. 80, 49-80.
46. PETERSON, S. D. 2001 Experimental investigation of multiple jets in crossflow. MSME thesis. Purdue University. School of Mechanical Engineering.
47. PETERSON, S. D. & PLESNIAK, M. W. 2002 Short-hole jet-in-crossflow velocity field and its relationship to film-cooling performance. Exps. Fluids 33, 889-898.
48. PIETRZYK, J. R., BOGARD, D. G. & CRAWFORD, M. E. 1989 Hydrodynamic measurements of jets in crossflow for gas turbine film cooling applications. ASME J. Turbomach. 111, 1139-1145.
49. PLESNIAK, M. W. & CUSANO, D. M. 2003 Scalar mixing in a confined rectangular jet in crossflow. J. Fluid Mech. (submitted).
50. RAFFEL, M., WILLERT, C. & KOMPENHANS, J. 1998 Particle Image Velocimetry: A Practical Guide. Springer.
51. ROBINSON, S. K. 1991 Coherent motions in a turbulent boundary layer. Annu. Rev. Fluid Mech. 23, 601-639.
52. RUDMAN, M. 1996 Simulation of the near field of a jet in a cross flow. Exps. Therm. Fluid Sci. 12, 134-141.
53. SAMIMY, M. & LELE, S. K. 1991 Motion of particles with inertia in a compressible free shear flow. Phys. Fluids A 3, 1915-1923.
54. SHERIF, S. A. & PLETCHER, R. H. 1990 The physical and thermal characteristics of the subsonic jet in a cross stream - a review. Mixed Convection Environ. Flows 152, 83-94.
55. SMITH, S. H. & MUNGAL, M. G. 1998 Mixing, structure and scaling of the jet in crossflow. J. Fluid Mech. 357, 83-122.
56. THOLE, K. A., GRITSCH, M., SCHULZ, A. & WITTIG, S. 1996 Flowfield measurements for cooling holes with expanded exits. ASME Paper 96-GT-174.
57. THOLE, K. A., GRITSCH, M., SCHULZ, A. & WITTIG, S. 1997 Effect of a crossflow at the entrance to a film-cooling hole. J. Fluids Engng 119, 533-540.
58. UZOL, O. & CAMCI, C. 2001 The effect of sample size, turbulence intensity and the velocity field on the experimental accuracy of ensemble averaged PIV measurements. 4th Intl Symp. on Particle Image Velocimetry, Göttingen, Germany, P. 1096.
59. WALTERS, D. K. & LEYLEK, J. H. 2000 A detailed analysis of film-cooling physics. Part I. Streamwise injection with cylindrical holes. ASME J. Turbomach. 122, 102-112.
60. WITTIG, S., SCHULZ, A., GRITSCH, M. & THOLE, K. A. 1996 Transonic film-cooling investigations: effects of hole shapes and orientations. ASME Paper 96-GT-222.
61. WOLOCHUK, M. C., PLESNIAK, M. W. & BRAUN, J. E. 1994 Evaluation of vortex shedding flow meters for HVAC applications. Purdue University Rep. ME-TSPC/HERL-TR-94-1.
62. WOLOCHUK, M. C., PLESNIAK, M. W. & BRAUN, J. E. 1996 The effects of turbulence and unsteadiness on vortex shedding from sharp-edged bluff bodies. J. Fluids Engng 118, 18-25.
63. YUAN, L. L., STREET, R. L. & FERZIGER, J. H. 1999 Large-eddy simulations of a round jet in crossflow. J. Fluid Mech. 379, 71-104.