The influence of oxygen content on the α to ω phase transformation and shock hardening of titanium

Journal of Applied Physics

Volumn 100, Issue 1, 2006, Pages

  Cerreta, E ^a   Gray III, G T ^a   Lawson, A C ^a   Mason, T A ^a   Morris, C E ^a  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEBYE-WALLER TEMPERATURES; PHASE FORMATION; PHASE STABILITY; SHOCK HARDENING; SHOCK STRESS;

DISLOCATIONS (CRYSTALS); HARDENING; INTERFEROMETERS; NEUTRON DIFFRACTION; OXYGEN; PHASE TRANSITIONS; TRANSMISSION ELECTRON MICROSCOPY;

TITANIUM ALLOYS;

EID: 33746211153     PISSN: 00218979     EISSN: None     Source Type: Journal    
DOI: 10.1063/1.2209540     Document Type: Article

References (50)

1. M. P. Usikov and V. A. Zilbershtein, Phys. Status Solidi A 19, 53 (1973).
2. S. G. Song and G. T. Gray III, Philos. Mag. A 71, 275 (1995).
3. C. Greeff, D. Trinkle, and R. Albers, J. Appl. Phys. 90, 2221 (2001).
4. R. G. Hennig, D. R. Trinkle, J. Bauchet, S. G. Srinivasan, R. C. Albers, and J. W. Wilkins, Nat. Mater. 4, 129 (2005).
5. A. Rabinkin, M. Talianker, and O. Botstein, Acta Metall. 29, 691 (1981).
6. D. R. Trinkle, R. Hennig, S. G. Srinivasan, D. Hatch, M. Jones, H. Stokes, R. Albers, and J. Wilkins, Phys. Rev. Lett. 91, 025701 (2003).
7. G. T. Gray III, C. E. Morris, and A. C. Lawson, Titanium '92, San Diego, CA, 1992 (TMS, Warrendale, PA, 1993), p. 225-232.
8. S. K. Sikka, Y. K. Vohra, and R. Chidambaram, Prog. Mater. Sci. 27, 245 (1982).
9. Y. K. Vohra, S. K. Sikka, E. S. K. Menon, and R. Krishnan, Acta Metall. 28, 683 (1980).
10. J. C. Jamieson, Science 140, 72 (1963).
11. S. Balasubramanian and L. Anand, Acta Mater. 50, 133 (2002).
12. A. Akhtar and E. Teghtsoonian, Metall. Trans. A 6, 2201 (1975).
13. H. Conrad, Prog. Mater. Sci. 26, 123 (1981).
14. S. R. Kalidindi, A. A. Salem, and R. D. Doherty, Adv. Eng. Mater. 5, 229 (2003).
15. A. Akhtar, Metall. Trans. A 6, 1105 (1975).
16. M. H. Yoo and J. K. Lee, Philos. Mag. A 63, 987 (1991).
17. G. T. Gray, III, D. Hayes, and R. S. Hixson, Sixth International Conference on Mechanical and Physical Behaviour of Materials Under Dynamic Loading, Kraków, Poland, 25-29 September 2000
18. [J. Pulp Pap. Sci. 10, 755 (2000)].
19. G. T. Gray in, R. S. Hixson, and C. E. Morris, AIP Conf. Proc. 427 (1991).
20. G. T. Gray III and K. Vecchio, Metall. Mater. Trans. A 26A, 2555 (1995).
21. Q. Xue, G. T. Gray III, and S. R. Chen, AIP Conf. Proc. 633 (2005) (to be published).
22. E. Cerreta, G. T. Gray III, R. S. Hixson, P. A. Rigg, and D. W. Brown, Acta Mater. 53, 1751-58 (2005).
23. L. E. Murr, in Shock Waves and High Strain Rate Phenomena in Metals, edited by M. A. Meyers and L. E. Murr (Plenum, New York, 1981), pp. 607-673.
24. M. A. Meyers, U. Andrade, and A. Chokshi, Metall. Mater. Trans. A 26A, 2881 (1995).
25. S. Mahajan. Phys. Status Solidi A 2, 187 (1970).
26. K. Vecchio and G. T. Gray III. Metall. Mater. Trans. A 26A, 2545 (1995).
27. G. T. Gray III, Mater. Res. Soc. Symp. Proc. 499, 87 (1998).
28. U. F. Kocks, Dislocations and Properties of Real Materials, The Institute of Metals, London, 1985), p. 125.
29. S. R. Chen and G. T. Gray III, Metall. Mater. Trans. A 27A, 2994 (1996).
30. S. G. Song and G. T. Gray III, Metall. Mater. Trans. A 26A, 2665 (1995).
31. U. F. Kocks, in The Mechanics of Dislocations, edited by E. C. Aifantis and J. P. Hirth (American Society for Metals, Metals Park, OH, 1985), pp. 81-83.
32. G. T. Gray III, N. Bourne, and J. Millett, J. Appl. Phys. 94, 6430 (2003).
33. L. E. Murr, in Shock Waves and High Strain Rate Phenomena in Metals, edited by M. A. Meyers and L. E. Murr (Plenum, New York, 1981), pp. 753-777.
34. P. G. Partridge, Metall. Rev. 12, 169 (1967).
35. E. Cerreta, G. T. Gray III, B. Henrie, D. W. Brown, R. S. Hixson, and P. A. Rigg, AIP Conf. Proc. 706, 541 (2003).
36. G. T. Gray III. in High Pressure Shock Compression of Solids, edited by J. R. Asay and M. Shahinpoor (Springer-Verlag, New York, 1993), Chap. 6, 187-215.
37. W. Hemsing, Rev. Sci. Instrum. 50, 73-78 (1979).
38. M. A. Meyers, Dynamic Behavior of Materials (Wiley, New York, 1994).
39. J. Silcock, Acta Metall. 6, 481-93 (1958).
40. C. W. Greeff, P. A. Rigg, M. D. Knudson, R. S. Hixson, and G. T. Gray III, AIP Conf. Proc. 706, 209 (2003).
41. A. C. Lawson, J. Gladstone, B. Cort, R. Sheldon, and E. Foltyn, in Actinide Processing: Methods and Materials, edited by B. Mishra and W. Averill (IMS, Warrendale, PA, 1994), pp. 31-44.
42. A. C. Lawson et al, J. Less-Common Met. 167, 353 (1991).
43. A. Larson and R. Von Dreele, Report No. LA-UR 86-748, 1986 (unpublished).
44. J. Williams, A. Sommer, and P. Tung, Metall. Trans. 3, 2979 (1972).
45. N. Paton, J. Williams, and G. Rauscher, in Titanium Science and Technology, edited by R. Jaffe and H. Burte (Plenum, New York, 1973), pp. 1049-1069.
46. J. Williams, A. Thompson, C. Rhodes, and J. C. Chesnutt, in Titanium and Titanium Alloys, edited by J. Williams and A. Belov (Plenum, New York, 1982), pp. 467-496.
47. C. Magee, D. Hoffman, and R. Davies, Philos. Mag. 23, 1531 (1971).
48. A. Rohatgi, K. S. Vecchio, and G. T. Gray III, Acta Mater. 49, 427 (2001).
49. P. Follansbee and G. T. Gray III, Int. J. Plast. 7, 651 (1991).
50. P. Follansbee and G. T. Gray III, Mater. Sci. Eng., A 138, 23 (1991).