Extraction of caprolactam with toluene in a pulsed disc and doughnut column - Part I: Recommendation of a model for hydraulic characteristics

Solvent Extraction and Ion Exchange

Volumn 24, Issue 4, 2006, Pages 499-517

  van Delden, M L ^a   Kuipers, N J M ^a   de Haan, A B ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Caprolactam; Extraction; Hydraulic characteristics; Model; Pulsed disc and doughnut column

Indexed keywords

MASS TRANSFER; MONOMERS; NYLON POLYMERS; TOLUENE;

CAPROLACTAM; DOUGHNUT COLUMN; HYDRAULIC TRANSFER; PULSED DISC;

SOLVENT EXTRACTION;

MASS TRANSFER; MONOMERS; NYLON POLYMERS; SOLVENT EXTRACTION; TOLUENE;

EID: 33745525944     PISSN: 07366299     EISSN: 15322262     Source Type: Journal    
DOI: 10.1080/07366290600760623     Document Type: Article

References (46)

1. Simons, A. and Haasen, N. (1983) Extraction of Caprolactam. In Handbook of Solvent Extraction. (pp. 557-566). New York: Wiley.
2. Movsowitz, R. and Kleinberger, R. and Buchalter, E. and Grinbaum, B. (2000). Comparison of the Performance of Full Scale Pulsed Columns vs. Mixer-Settlers for Uranium Solvent Extraction. Proceedings of the 30th Annual Hydrometallurgical Conference, 2000. In [pp. 181-191].
3. Kleinberger, R. (2001). Zinc Sulfate Extraction by Bateman Pulsed Column Technology. Proceedings of the Copper, Cobalt, Nickel and Zinc Recovery conference 2001. In [pp. K1-K13].
4. Buchalter, E. and Kleinberger, R. and Grinbaum, B. (1998). Copper Solvent Extraction Using a Bateman Pulsed Column. Proceedings of the Extraction Metallurgy Africa conference 1998. In [pp. 185-199].
5. Jahya, A. and Stevens, G. and Pratt, H. (2000). Mass Transfer Studies for a Pulsed Disc and Doughnut Extraction Column. Proceedings of the International Congress on Mineral Processing and Extractive Metallurgy 2000. In [pp. 281-284].
6. Angelov, G. and Gourdon, C. and Liné, A. (1998) Simulation of Flow Hydrodynamics in a Pulsed Solvent Extraction Column under Turbulent Regimes Chem. Eng. J., 71, pp. 1-9.
7. Mate, A. and Masbernat, O. and Gourdon, C. (2000) Detachment of a Drop from an Internal Wall in a Pulsed Liquid-Liquid Column Chem. Eng. Sci., 55, pp. 2073-2088.
8. Mate, A. and Morchain, J. and Masbernat, O. and Gourdon, C. (1996) A Transient Method for the Study of Wetting in a Liquid-Liquid Contactor Chem. Eng. Sci., 51, pp. 5313-5323.
9. Aoun Nabli, M. and Guiraud, P. and Gourdon, C. (1998) CFD Contribution to a Design Procedure for Discs and Doughnuts Extraction Columns Trans. IChemE., 76, pp. 951-960.
10. Milot, J. and Duhamet, J. and Gourdon, C. and Casamatta, G. (1990) Simulation of a Pneumatically Pulsed Liquid-Liquid Extraction Column Chem. Eng. J., 45, pp. 111-122.
11. Angelov, G. and Gourdon, C. (2002) Turbulent Viscosity in Pulsed Stagewise Extraction Columns Bulgarian Chem. Comm., 34, pp. 124-134.
12. Angelov, G. and Gourdon, C. (2002) Study on the Turbulence in Pulsed Stagewise Extraction Columns: Turbulence Macroscale Hungarian J. Ind. Chem., 30, pp. 137-142.
13. Bardin-Monnier, N. and Guiraud, P. and Gourdon, C. (2003) Langrangian Simulations Contribution to the Knowledge of Discs and Doughnuts Pulsed Solvent Extraction Columns Hydrodynamics Chem. Eng. Proc., 42, pp. 503-516.
14. Bardin-Monnier, N. and Guiraud, P. and Gourdon, C. (2003) Residence Time Distribution of Droplets within Discs and Doughnuts Pulsed Extraction Columns via Langrangian Experiments and Simulations Chem. Eng. J., 94, pp. 241-254.
15. Aoun Nabli, M. and Guiraud, P. and Gourdon, C. (1997) Numerical Experimentation: A Tool to Calculate the Axial Dispersion Coefficient in Discs and Doughnuts Pulsed Extraction Columns Chem. Eng. Sci., 52, pp. 2353-2368.
16. Angelov, G. and Gourdon, C. (1999) Influence of Stage Configuration on Flow Parameters in a Stagewise Extraction Column Hungarian J. Ind. Chem., 27, pp. 281-286.
17. Jahya, A. and Stevens, G. and Pratt, H. (1999). Flood Point and Dispersed Phase Hold-up in a Pulsed Disc and Doughnut Liquid-Liquid Extraction Column, In. In Proceedings of the Chemeca'99 Conference [pp.].
18. Al Khani, S. and Gourdon, C. and Gasamatta, G. (1988) Simulation of Hydrodynamics and Mass Transfer of a Disks and Rings Pulsed Column Ind. Eng. Chem. Res., 27, pp. 329-333.
19. Godfrey, J. and Slater, M. (1994) Liquid-Liquid Extraction Equipment. New York: John Wiley & Sons, Inc.
20. Pratt, H. and Stevens, G. (1992) Selection, Design and Pilot Testing of Equipment. In Science and Practice of Liquid-Liquid Extraction. Oxford: Clarendon Press.
21. Logsdail, D. and Slater, M. (1983) Pulsed Perforated-Plate Columns. In Handbook of Solvent Extraction. (pp. 355-372). New York: Wiley.
22. Klicka, V. and Cermak, J. (1971) Zweiphasenströmung in der Pulsier-Extraktionskolonne Verfahrenstechnik, 5, pp. 320-327.
23. Berger, R. and Walter, K. (1985) Flooding in Pulsed Sieve Plate Extractors Chem. Eng. Sci., 40, pp. 2175-2184.
24. van Delden, M. and Kuipers, N. and de Haan, A. (2004) Liquid-liquid Equilibria and Physical Properties of the Quaternary System Water+Caprolactam+Ammonium Sulfate+Benzene and Toluene J. Chem. Eng. Data, 49, pp. 1760-1770.
25. Boyadzhiev, L. and Spassov, M. (1982) On the Size of Drops in Pulsed and Vibrating Plate Extraction Columns Chem. Eng. Sci., 37, pp. 337-340.
26. Baird, M. and Lane, S. (1973) Drop Size and Hold-up in a Reciprocating Plate Extraction Column Chem. Eng. Sci., 28, pp. 947-957.
27. Baird, M. and Shen, Z. (1984) Holdup and Flooding in Reciprocating Plate Extraction Columns Can. J. Chem. Eng., 62, pp. 218-227.
28. Kumar, A. and Hartland, S. (1996) Unified Correlations for the Prediction of Drop Size in Liquid-Liquid Extraction Columns Ind. Eng. Chem. Res., 35, pp. 2682-2695.
29. Kumar, A. and Hartland, S. (1986) Prediction of Drop Size in Pulsed Perforated-Plate Extraction Columns Chem. Eng. Comm., 44, pp. 163-182.
30. Kumar, A. and Hartland, S. (1988) Prediction of Dispersed Phase Hold-up in Pulsed Perforated-Plate Extraction Columns Chem. Eng. Process., 23, pp. 41-59.
31. Kumar, A. and Hartland, S. (1988) Prediction of Dispersed Phase Hold-up and Flooding Velocities in Karr Reciprocating-Plate Extraction Columns Ind. Eng. Chem. Res., 27, pp. 131-138.
32. Kumar, A. and Hartland, S. (1995) A Unified Correlation for the Prediction of Dispersed-Phase Hold-up in Liquid-Liquid Extraction Equipment Ind. Eng. Chem. Res., 34, pp. 3925-3940.
33. Hinze, J. (1955) Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes AIChE J., 1, pp. 289-295.
34. Arai, K. and Konno, M. and Matunaga, Y. and Saito, S. (1977) Effect of Dispersed-Phase Viscosity on the maximum Stable Drop Size for Breakup in Turbulent Flow J. Chem. Eng. Japan, 10, pp. 325-330.
35. Godfrey, J. and Slater, M. (1991) Slip Velocity Relationships for Liquid-Liquid Extraction Columns Trans. IChemE., 69, pp. 130-141.
36. Kumar, A. and Hartland, S. (1989) Independent Prediction of Slip Velocity and Hold-up in Liquid-Liquid Extraction Columns Can. J. Chem. Eng., 67, pp. 17-25.
37. Gayler, R. and Pratt, H. (1951) Hold-up and Pressure Drop in Packed Columns Trans. IChemE., 29, pp. 110-125.
38. Gayler, R. and Roberts, N. and Pratt, H. (1953) Liquid-Liquid Extraction Studies: Part IV A Further Study of Hold-up in Packed Columns. Trans. IChemE., 31, pp. 57-68.
39. Thornton, J. (1956) Spray Liquid Extraction Columns: Prediction of Limiting Hold-up and Flooding Rates Chem. Eng. Sci., 5, pp. 201-208.
40. Sakiadis, B. (1984) Fluid and Particle Mechanics. In Perry's Chemical Engineer's Handbook. Singapore: McGraw-Hill Book Co.
41. Edwards, R. and Beyer, G. (1956) Flooding Characteristics of a Pulse Extraction Column AIChE J., 2, pp. 148-152.
42. Selker, A. and Sleicher, C. (1965) Factors Affecting which Phase will Disperse when Immiscible Liquids are Stirred Together Can. J. Chem. Eng., 43, pp. 298-301.
43. Quinn, J. and Sigloh, D. (1963) Phase Inversion in the Mixing of Immiscible Liquids Can. J. Chem. Eng., 41, pp. 15-18.
44. Deshpande, K. and Kumar, S. (2003) A New Characteristic of Liquid-Liquid Systems- Inversion Holdup of Intensely Agitated Dispersions Chem. Eng. Sci., 58, pp. 3829-3835.
45. Yeo, L. and Matar, O. and Perez de Ortiz, E. and Hewitt, G. (2002) A Simple Predictive Tool for Modelling Phase Inversion in Liquid-Liquid Dispersions Chem. Eng. Sci., 57, pp. 1069-1072.
46. Kumar, S. (1996) On Phase Inversion Characteristics of Stirred Dispersions Chem. Eng. Sci., 51, pp. 831-834.