Rotating stall and stall-controlled performance of a single stage subsonic axial compressor

Journal of Thermal Science

Volumn 15, Issue 1, 2006, Pages 1-13

  Outa, Eisuke ^a  

^a WASEDA UNIVERSITY   (Japan)

Author keywords

Forward swept blade; Rotating stall; Stall cell structure; Stall control; Stall warning sensing; Tip leakage flow; Two and three dimensional unsteady CFD

Indexed keywords

AERODYNAMICS; COMPUTATIONAL FLUID DYNAMICS; DISTORTION (WAVES); LEAKAGE (FLUID); ROTATION; STALL INDICATORS; THREE DIMENSIONAL; TURBOMACHINE BLADES; VORTEX FLOW;

FORWARD SWEPT BLADE; ROTATING STALL; STALL CELL STRUCTURE; STALL CONTROL; STALL WARNING SENSING; TIP LEAKAGE FLOW; UNSTEADY CFD;

COMPRESSORS;

EID: 33745294238     PISSN: 10032169     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11630-006-0001-2     Document Type: Article

References (34)

1. Emmons, H W, Pearson, C E, Grant, H P. Compressor Surge and Stall Propagation. Trans. ASME, 1955, 177: 455-469
2. Greitzer, E M. Surge and Rotating Stall in Axial Flow Compressor, Part I and Part II. J. Engineering for Power, Trans. ASME, 1976, 98(2): 190-217
3. Takata, H, Nagano, S. Non-linear Analysis of Rotating Stall. J. of Engineering for Power, Trans. ASME, 1972, 94(4): 279-293
4. Day, I J, Cumpsty, N A. Measurement and Interpretation of Flow within Rotating Stall Cells in Axial Compressor. J. of Mechanical Engineering Science, 1978, 20(2): 101-114
5. Cumpsty, N A, Greitzer, E M. A Simple Model for Compressor Stall Cell Propagation. J. of Engineering for Power, Trans. ASME, 1982, 104(1): 170-176
6. Moore, F K. A Theory of Rotating Stall of Multistage Axial Compressor, Part I, II and III. J. of Engineering for Power, Trans. ASME, 1984, 106(2): 313-336
7. Moore, F K, Greitzer, E M. A Theory of Post-Stall Transients in Axial Compressor System, Part I and II. J. of Engineering for Gas Turbines and Power, Trans. ASME, 1986, 108(1): 68-76, 231-240
8. Day, I J. Active Suppression of Rotating Stall and Surge in Axial Compressor. J. of Turbomachinery, Trans. ASME, 1993, 115(1): 40-47
9. Epstein, A H, Ffowcs Williams, J E, Greitzer, E M. Active Suppression of Aerodynamic Instabilities in Turbomachines. J. of Propulsion and Power, 1989, 5(2): 204-211
10. Paduano, J D., Epstein, A H, Valavani, L, et al. Active Control of Rotating Stall in a Low Speed Axial Compressor. J. of Turbomachinery, Trans. ASME, 1993, 115(1): 48-56
11. Haynes, J M, Hendricks, G J, Epstein, A H. Active Stabilization of Rotating Stall in a Three Stage Axial Compressor. J. of Turbomachinery, Trans. ASME, 1994, 116(2): 226
12. Day, I J. Review of Stall, Surge and Active Control in Axial Compressors. In: Proc. of 11th ISABE, Tokyo, Japan, 1993, 1: 97-105
13. Gysling, D L, Greitzer, E M. Dynamic Control of Rotating Stall in Axial Flow Compressors using Aeromechanical Feedback. Hague, ASME Paper 94-GT-292, 1994
14. Suder, K H, Hathaway, M D, Thorp, S A, et al. Compressor Stability Enhancement Using Discrete Tip Injection. J. of Turbomachinery, Trans. ASME, 2001, 123: 14-23
15. Larguier, R. Experimental Analysis Method for Unsteady Flow in Turbomachines. J. Engineering for Power, 1981, 103(2): 415-423
16. Jackson, A D. Stall Cell Development in an Axial Compressor. J. of Turbomachinery, Trans. ASME, 1987, 109(4): 492-498
17. Poensgen, C A, Gallus, H E. Rotating Stall in a Single-Stage Axial Flow Compressor. J. of Turbomachinery, Trans. ASME, 1996, 118(2): 186-196
18. Nishizawa, T, Takata, H. Numerical Analysis of Rotating Stall by a Vortex Model. Trans. JSME, Series B, 1990, 56(523): 64-73. Also appears as: Numerical Analysis of Separated Flow through Stalled Cascade. In: Proc. 1991 Yokohama International Gas Turbine Congress, 1991, I: 49-57
19. Outa, E, Kato, D, Chiba, K. An N-S Simulation of Stall Cell Behavior in a 2-D Compressor Rotor-Stator System at Various Load. 39th International Gas Turbine and Aeroengine Congress, Hague, ASME Paper 94-GT-257, 1994
20. Kato, D, Outa, E, Chiba, K. On Sub-Cell Structure of Deep Rotating Stall in an Axial Compressor, Unsteady Aerodynamics and Aeroelasticity of Turbomachines. Ed. Fransson, T.H., In: Proc. of 8th ISUAAT, Stockholm, 1997. 511-524
21. Kato, D, Outa, E, Chiba, K. A Two-dimensional Compressible Navier-Stokes Simulation of Transient Bows in Compressor Rotor/Stator Cascades (3rd Report) (in Japanese). Trans. JSME, 1997, 63(614): 69-77
22. Outa, E, Kijima, M, Ohta, Y, et al. Hysteresis of Rotating Stall in a Compressor Stage under Uniform and Stationarily Distorted Inlet Flow Conditions, Unsteady aerodynamics, aeroacoustics and aeroelasticity of turbo machines. Eds. Ferrand, P. and Aubert, S., In: Proc. 9th ISUAAT, Lyon, 2000. 264-279
23. Hoying, D A, Tan, C S, Vo, H D, et al. Role of Blade Passage Flow Structures in Axial Compressor Rotating Stall Inception. J. of Turbomachinery, Trans. ASME, 1999, 121: 735-742
24. Hah, C, Schulze, R, Wagner, S, et al. Numerical and Experimental Study for Short Wavelength Stall Inception in a Low Speed Axial Compressor. In: Proc. of 14th ISABE, Florence, Italy, ISABE Paper No.99-7033, 1999
25. Inoue, M, Kuromaru, M, Tanino, T, et al. Comparative Studies on Short and Long Length-Scale Stall Cell Propagating in an Axial Compressor Rotor. J. of Turbomachinery, Trans. ASME, 2001, 123: 24-32
26. Inoue, M, Kuromaru, M, Yoshida, S., et al. Short and Long Length-Scale Disturbances Leading to Rotating Stall in an Axial Compressor Stage with Different Stator/Rotor Gaps. J. of Turbomachinery, Trans. ASME, 2002, 124: 376-384
27. Hoenen, H, Arnold, T. Development of a Surge Prediction System for Multi Stage Axial Compressors. In: Proc. of the International Gas Turbine Congress 2003 Tokyo, Paper No.IGTC2003Tokyo TS-040, 2003. 1-6
28. Tahara, N, Kurosaki, M, Ohta, Y, et al. Active Stall Control in Axial Flow Compressor Using Artificial Hub Stall. AIAA Paper 97-2656, 1997
29. Tahara, N, Kurosaki, M, Ohta, Y, et al. Early Stall Warning Technique for Axial Flow Compressors. In: Proceedings of ASME Turbo Expo 2004, Wien, Austria, Paper GT2004-53292, 2004
30. Takata, H, Tsukuda, Y. Stall Margin Improvement by Casing Treatment-Its Mechanism and Effectiveness. J. of Engineering for Power, Trans. ASME, 1977. 121-133
31. Hah, C, Wennerstrom, A J. Three-Dimensional Flowfields Inside a Transonic Compressor with Swept Blades. J. of Turbomachinery, Trans. ASME, 1991, 113: 241-251
32. Camp, T R, Day, I J. A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor. J. of Turbomachinery, Tran. ASME, 1998, 120: 393-401
33. Scott McNulty, Decker, J J, Beacher, B F, et al. The Impact of Forward Swept Rotors on Tip Clearance Flows in Subsonic Axial Compressors. J. of Turbomachinery, Trans. ASME, 2004, 126: 445-454
34. Spalart, P R, Allmaras, S R. A One-Equation Turbulence Model for Aerodynamics Flow. AIAA paper 92-0439, 1992