A computational study of the flow around an isolated wheel in contact with the ground

Journal of Fluids Engineering, Transactions of the ASME

Volumn 128, Issue 3, 2006, Pages 520-530

  McManus, James ^a   Zhang, Xin ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; DRAG; NAVIER STOKES EQUATIONS; PRESSURE EFFECTS; REYNOLDS NUMBER; SENSITIVITY ANALYSIS;

GRID SENSITIVITY; ISOLATED WHEEL; PRESSURE LIFT; REYNOLDS-AVERAGED NAVIER-STOKES (URANS) METHOD;

FLUID MECHANICS;

EID: 33745154484     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2175158     Document Type: Article

References (35)

1. Agathangelou, B., and Gascoyne, M., 1998, "Aerodynamic Design Considerations of a Formula 1 Racing Car," SAE International Congress and Exposition, Detroit, Michigan, U.S.A., 23-26 February, SAE Paper No. 980399.
2. Nelson, P. M., and Phillips, S. M., 1997, "Quieter Road Surfaces," Transport Research Laboratory Annual Review 1997, Transport Research Laboratory, Crowthorne, U.K.
3. Hussein, H. J., and Martinuzzi, R. J., 1996, "Energy Balance for the Turbulent Flow Around a Surface Mounted Cube Placed in a Channel," Phys. Fluids, 8, pp. 764-780.
4. Ahmed, S. R., Ramm, G., and Faltin, G., 1984, "Some Salient Features of the Time-Averaged Ground Vehicle Wake," SAE Paper No. 840300.
5. Morelli, A., 1969, "Aerodynamic Effects on an Automobile Wheel," Technical Report Translation 47/69, MIRA. Translated from (in Italian)
6. Morelli, A., 1969, "Aerodynamic Effects on the Car Wheel," ATA Review, 22(6), pp. 281-288, June.
7. Morelli, A., 1970, "Aerodynamic Actions on an Automobile Wheel," Paper 5, In Scibor-Rylski, A. J., editor, Road Vehicle Aerodynamics Proceedings of the First Symposium on Road Vehicle Aerodynamics, City University, London, U.K.
8. Stapleford, W. R., and Carr, G. W., 1970, "Aerodynamic Characteristics of Exposed Rotating Whecls," Technical Report No. 1970/2, MIRA, Nuneaton, U.K.
9. Cogotti, A., 1983, "Aerodynamic Characteristics of Car Wheels," International Journal of Vehicle Design, Technological Advances In Vehicle Design Series, Special Publication SP3, Impact of Aerodynamics on Vehicle Design, pp. 173-196.
10. Waschle, A., Cyr, S., Kuthada, T., and Wiedemann, J., 2004, "Flow Around an Isolated Wheel - Experimental and Numerical Comparison of Two CFD Codes," SAE Motorsports Engineering Conference and Exhibition, Dearborn, Michigan, U.S.A., 30 November-3 December, SAE Paper No. 2004-01-0445.
11. Fackrell, J. E., and Harvey, J. K., 1973, "The Flowfield and Pressure Distribution of an Isolated Road Wheel," in Advances in Road Vehicle Aerodynamics, Stephens, H. S., ed., BHRA Fluid Engineering, pp. 155-165.
12. Fackrell, J. E., 1974, "The Aerodynamics of an Isolated Wheel Rotating in Contact With the Ground," Ph.D. thesis, University of London, London, U.K.
13. Fackrell, J. E., and Harvey, J. K., 1975, "The Aerodynamics of an Isolated Road Wheel," in Pershing, B., editor, Proceedings of the Second AIAA Symposium of Aerodynamics of Sports and Competition Automobiles, Los Angleles, California, U.S.A., 11 May, pp. 119-125.
14. Hinson, M., 1999, "Measurement of the Lift Produced by an Isolated, Rotating Formula One Wheel Using a New Pressure Measurement System," M.Sc. thesis, Cranfield University, U.K.
15. Whitbread, L., 2000, "Measurement of the Lift Distribution on a Rotating Wheel," M.Sc. thesis, Cranfleld University, U.K.
16. Skea, A. F., Bullen, P. R., and Qiao, J., 2000, "CFD Simulations and Experimental Measurements of the Flow Over a Rotating Wheel in a Wheel Arch," SAE 2000 World Congress, Detroit, Michigan, U.S.A., 6-9 March, SAE Paper No. 2000-01-0487.
17. Mears, A. P., Dominy, R. G., and Sims-Williams, D. B., 2002, "The Flow About an Isolated Rotating Wheel - Effects of Yaw on Lift, Drag and Flow Structure," 4th MIRA International Vehicle Aerodynamics Conference, Warwick, U.K., 16-17 October.
18. Mears, A. P., Dominy, R. G., and Sims-Williams, D. B., 2002, "The Air Flow About an Exposed Racing Wheel," SAE Motorsports Engineering Conference and Exhibition, Indianapolis, Indiana, U.S.A., 2-5 December, SAE Paper No. 2002-01-3290.
19. Mears, A. P., Crossland, S. C., and Dominy, R. G., 2004, "An Investigation Into the Flow-Field About an Exposed Racing Wheel," SAE Motorsports Engineering Conference and Exhibition, Dearborn, Michigan, U.S.A., 30 November-3 December, SAE Paper No. 2004-01-0446.
20. Mercker, E., Breuer, N., Berneburg, H., and Emmelmann, H. J., 1991, "On the Aerodynamic Interference Due to the Rolling Wheels of Passenger Cars," SAE Publication No. 910311.
21. Bearman, P. W., De Beer, D., Hamidy, E., and Harvey, J. K., 1988, "The Effect of a Moving Floor on Wind-Tunnel Simulation of Road Vehicles," SAE Paper No. 880245.
22. Axon, L., Garry, K., and Howell, J., 1998, "An Evaluation of CFD for Modelling the Flow Around Stationary and Rotating Wheels," SAE Paper No. 980032.
23. Axon, L., 1999, "The Aerodynamic Characteristics of Automobile Wheels - CFD Prediction and Wind Tunnel Experiment," Ph.D. thesis, Cranfield University, U.K.
24. Skea, A. F., Bullen, P. R., and Qiao, J., 1998, "The Use of CFD to Predict the Air Flow Around a Rotating Wheel," 2nd MIRA International Conference on Vehicle Aerodynamics, Coventry, U.K., 20-21 October.
25. Kellar, W. P., Pearse, S. R. G., and Savill, A. M., 1999, "Formula 1 Car Wheel Aerodynamics," Sports Engineering, 2, pp. 203-212.
26. Knowles, R., Saddington, A., and Knowles, K., 2002. "Simulation and Experiments on an Isolated Racecar Wheel Rotating in Ground Contact," 4th MIRA International Vehicle Aerodynamics Conference, Warwick, U.K., 16-17 October.
27. Basara, B., Beader, D., and Przulj, V., 2000, "Numerical Simulation of the Air Flow Around a Rotating Wheel," 3rd MIRA International Vehicle Aerodynamics Conference, Rugby, U.K., 18-19 October.
28. Fluent Incorporated, 2001, "FLUENT 6.0 User's Guide," Fluent Incorporated, Lebanon, New Hampshire, U.S.A.
29. Spalart, P. R., and Allmaras, S. R., 1992, "A One-Equation Turbulence Model for Aerodynamic Flows," 30th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, U.S.A., 6-9 January, AIAA Paper No. 92-0439.
30. Shin, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J., 1995, "A New k- Eddy Viscosity Model for High Reynolds Number Turbulent Flows," Comput. Fluids, 24(3), pp. 227-238.
31. Krajnovic, S., and Davidson, L., 2002, "Large-Eddy Simulation of the Flow Around a Bluff Body," AIAA J., 40(5), pp. 927-936.
32. Krajnovic, S., and Davidson, L., 2003, "Numerical Study of the Flow Around a Bus-Shaped Body," ASME J. Fluids Eng., 125(3), pp. 500-509.
33. Hedges, L. S., Travin, A. K., and Spalart, P. R., 2002, "Detached-Eddy Simulations Over a Simplified Landing Gear," ASME J. Fluids Eng., 124(2), pp. 413-423.
34. Han, T., 1989, "Computational Analysis of Three-Dimensional Turbulent Flow Around a Bluff Body in Ground Proximity." AIAA J., 27(9), pp. 1213-1219.
35. Martinuzzi, R., and Tropea, C., 1993, "The Flow Around Surface-Mounted Prismatic Obstacles Placed in a Fully Developed Channel Flow," ASME J. Fluids Eng., 115(1), pp. 85-91.