Earthquake performance of steel frames with nitinol braces

Journal of Earthquake Engineering

Volumn 10, Issue , 2006, Pages 45-66

  Auricchio, Ferdinando ^a,b   Fugazza, Davide ^a,b   Desroches, Reginald ^c  

^a UNIVERSITY OF PAVIA   (Italy)

^b ROSE School   (Italy)

^c Georgia Institute of Technology   (United States)

Author keywords

Bracing systems; Dynamic analyses; Seismic applications; Shape memory alloys; Steel frames

Indexed keywords

DYNAMICS; EARTHQUAKE RESISTANCE; EVALUATION; FINITE ELEMENT METHOD; SHAPE MEMORY EFFECT; STRUCTURES (BUILT OBJECTS);

BRACING SYSTEMS; DYNAMIC ANALYSES; SEISMIC APPLICATIONS; STEEL FRAMES;

STEEL STRUCTURES;

EID: 33646725314     PISSN: 13632469     EISSN: None     Source Type: Journal    
DOI: 10.1080/13632460609350628     Document Type: Article

References (31)

1. Adachi, Y. and Urijoh, S. [1999] “Development of shape memory alloy damper for intelligent bridge systems,” Proceedings of SPIE, Newport Beach, California, USA 3671, 31-42.
2. Andrawes, B., McCormick, J. and DesRoches, R. [2004] “Effect of cycling modeling parameters on the behavior of shape memory alloys for seismic applications,” Proceedings of SPIE, San Diego, California, USA.
3. Auricchio, F. and Sacco, E. [1997] “A one-dimensional model for superelastic shape- memory alloys with different elastic properties between austenite and martensite,” International Journal of Non-Linear Mechanics 32, 1101-1114.
4. Baratta, A. and Corbi, O. [2002] “On the dynamic behaviour of elastic-plastic structures equipped with pseudoelastic SMA reinforcements,” Computational Materials Science 25, 1-13.
5. Beraardini, D. and Brancaleoni, F, [1999] “Shape memory alloys modelling for seismic applications,” Proceedings of the Final Workshop, of MAN SIDE Project — Mem. ory Alloys for New Seismic Isolation and Energy Dissipation Devices, Roma, Italy, pp. 73-84.
6. Bruno, S. and Valente, C. [2002] “Comparative response analysis of conventional and innovative seismic protection strategies,” Earthquake Engineering and Structural Dynamics 31, 1067-1092.
7. Castellano, M. G. [2000] “Shaking table tests of masonry facade walls with and without SMADs,” Proceedings of the Final Workshop of ISTECH Project — Shape Memory Alloy Devices for Seismic Protection of Cultural Heritage Structures, Ispra, Italy, pp. 99-109.
8. Clark, P. W., Aiken, I. D., Kelly, J. M., Higashino, M. and Krumme R. C. [1995] “Experimental and analytical studies of shape memory alloy dampers for structural control,” Proceedings of SPIE, San Diego, California, USA 2445, 241-251.
9. Corbi, O. [2003] “Shape memory alloys and their application in structural oscillations attenuation,” Simulation Modelling Practice and Theory 11, 387-402.
10. Croci, G., Bond, A. and Viskovic, A. [2000] “Use of shape memory alloy devices in the Basilica of St. Francis of Assisi,” Proceedings of the Final Workshop of ISTECH Project — Shape Memory Alloy Devices for Seismic Protection of Cultural Heritage Structures, Ispra, Italy, pp. 110-133.
11. DesRoches, R. and Delemont, M. [2002] “Seismic retrofit of simply supported bridges using shape memory alloys,” Engineering Structures 24, 325-332.
12. DesRoches, R., McCormick, J. and Delemont, M. [2004] “Cyclic properties of superelastic shape memory alloy wires and bars," Journal of Structural Engineering 130, 38-46.
13. DesRoches, R. and Smith, B. [2004] “Shape memory alloys in seismic resistant design and retrofit: a critical review of their potential and limitations,” Journal of Earthquake Engineering 8, 415-429.
14. Dolce, M. and Cardone, D. [2001] “Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension,” International Journal of Mechanical Sciences 43, 2657-2677.
15. Dolce, M., Cardone, D. and Marnetto, R. [2000] “Implementation and testing of passive control devices based on shape memory alloys,” Earthquake Engineering and Structural Dynamics 29, 945-968.
16. Dolce, M., Cardone, D., Ponzo, F. C. and Valente, C. [2005] “Shaking table tests on reinforced concrete frames without and with passive control systems,” Earthquake Engineering and Structural Dynamics (in press).
17. Duerig, T., Melton, K., Stokel, D. and Wayman, C. [1990] Engineering Aspects of Shape Memory Alloys (Butterworth-Heinemann, London).
18. Fugazza, D. [2003] Shape-memory Alloy Devices in Earthquake Engineering: Mechanical Properties, Constitutive Modelling and Numerical Simulations, Master’s thesis, European School for Advanced Studies in Reduction of Seismic Risk (ROSE School), Pavia, Italy.
19. Fugazza, D. [2005] Experimental Investigation on the Cyclic Properties of Superelastic NiTi Shape-memory Alloy Wires and Bars, Individual study, European School for Advanced Studies in Reduction of Seismic Risk (ROSE School), Pavia, Italy.
20. Han, Y.-L., Li, Q. S., Li, A.-Q., Leung, A. Y. T. and Lin, P.-H. [2003] “Structural vibration control by shape memory alloy damper,” Earthquake Engineering and Structural Dynamics 32, 483-494.
21. Indirli, M. [2000] “The demo-intervention of the ISTECH Project: the Bell Tower of S. Giorgio in Trignano (Italy),” Proceedings of the Final Workshop of ISTECH Project — Shape Memory Alloy Devices for Seismic Protection of Cultural Heritage Structures, Ispra, Italy, pp. 134-146.
22. Indirli, M., Carpani, B., Martelli, A., Castellano, M. G., Infanti, S., Croci, G., Biritognolo, M., Bond, A., Viskovic, A. and Viani, S. [2000] “Experimental tests on masonry structures provided with shape memory alloy antiseismic devices,” 12th World Conference in Earthquake Engineering, Auckland, New Zealand, pp. 1-8.
23. Krumme, R., Hayes, J. and Sweeney, S. [1995] “Structural damping with shape-memory alloys: one class of devices,” Proceedings of SPIE, San Diego, California, USA 2445, 225-240.
24. Mazzolani, F. M. and Mandara, A. [2002] “Modern trends in the use of special metals for the improvement of historical and monumental structures,” Engineering Structures 24, 843-856.
25. Mazzoni, S., McKenna, F., Scott, M. H., Fenves, G. L. and Jeremic, B. [2003] Open System for Earthquake Engineering Simulation (OpenSees) — Command Language Manual.
26. Ocel, J., DesRoches, R., Leon, R. T., Hess, W. G., Krumme, R., Hayes, J. R. and Sweeney, S. [2004] “Steel beam-column connections using shape memory alloys,” Journal of Structural Engineering 130, 732-740.
27. Sabelli, R. [2001] “Research on improving the design and analysis of earthquake-resistant steel-braced frames” The 2000 NEHRP Professional Fellowship Report.
28. Sabelli, R., Mahin, S. and Chang, C, [2003] “Seismic demands on steel braced frame buildings with buckling-restrained braces,” Engineering Structures 25, 655-666.
29. Valente, C., Cardone, D., Lamonaca, B. G. and Ponzo, F. M. [1999] “Shaking table tests of structures with conventional and SMA based protection devices,” Proceedings of the Final Workshop of MANSIDE Project — Memory Alloys for New Seismic Isolation and Energy Dissipation Devices, Roma, Italy, pp. 177-194.
30. Wilde, K., Gardoni, P. and Fujino, Y. [2000] “Base isolation system with shape memory alloy device for elevated highway bridges,” Engineering Structures 22, 222-229.
31. Wilson, J. and Wesolowsky, M. [2005] “Shape memory alloys for seismic response modification: a state-of-the-art review,” Earthquake Spectra 21, 569-601.