Shape memory alloys in seismic resistant design and retrofit: A critical review of their potential and limitations

Journal of Earthquake Engineering

Volumn 8, Issue 3, 2004, Pages 415-429

  Desroches, R ^a   Smith, B ^a  

^a Georgia Institute of Technology   (United States)

Author keywords

Nitinol; Retrofit; Seismic; Shape memory alloys

Indexed keywords

DAMPING; ELASTIC MODULI; MACHINING; SHAPE MEMORY EFFECT; STRUCTURAL DESIGN; THERMAL EFFECTS;

SEISMIC RESISTANT DESIGN; SUPERELASTIC EFFECTS; TEMPERATURE DEPENDENCE;

SEISMOLOGY;

EID: 8644286466     PISSN: 13632469     EISSN: None     Source Type: Journal    
DOI: 10.1142/S1363246904001298     Document Type: Review

References (56)

1. Adachi, Y. and Unjoh, S. [1999] "Development of shape memory alloy damper for intelligent bridge systems," Proceedings of SPIE, Smart Structures and Materials.
2. Aiken, I. and Kelly, J. [1990] "Earthquake simulator testing and analytical studies of two energy-absorbing systems for multistorey structures," University of California, Berkeley Report, UCB/EERC-90-03.
3. Bernardini, D., Brancaleoni, F., Papacharalabous, E. and Zisiadis, A. [1999] "Shake table tests for reinforced concrete frames with conventional and shape memory alloy seismic protection," MANSIDE Project, II169-176.
4. Brady, P., Sweeney, S. and Hayes, J. [1995] "Advancing seismic structural resistance," ASEE Annual Conference Proceedings.
5. Buehler, W. and Wiley, R. [1961] "The properties of TiNi and associated phases," Report, NOLTR 61-75 [AD 266607], US Naval Ordnance Laboratory.
6. Castellano, M., Indirli, M. and Martelli, A. [2001] "Progress of application, research and development and design guidelines for shape memory alloy devices for cultural heritage structures in Italy," Proceedings of SPIE, Smart Structures and Materials.
7. Chang, L. and Read T. [1951] Trans. AIME 191, p. 47.
8. Chute, D. and Hodgson, D. [1990] "Eyeglass frames and SMA - The challenge and the product," Engineering and Aspects of Shape Memory Alloys, pp. 420-425.
9. Clark, P., Aiken, I., Kelly, J., Higashino, M. and Krumme, R. [1995] "Experimental and analytical studies of shape memory alloy dampers for structural control," Proceedings of Passive Damping, San Diego, CA, USA.
10. Croci, G. [2001] "Strengthening of the Basilica of St Francis of Assissi after the September 1997 Earthquake," Structural Engineering International.
11. Davoodi, H., Noori, M., Hou, Z. and Dimentberg, M. [1997] "Application of shape memory alloys in vibration control," Proceedings of the 16th Canadian Congress Applied Mechanics CANCAM, Quebec.
12. DesRoches, R., McCormick, J. and Delemont, M. [2003]. "Cyclic properties of superelastic shape memory alloys," ASCE Journal of Structural Engineering, in press.
13. DesRoches, R. and Delemont, M. [2001] "Seismic retrofit of multi-span simply supported bridges using shape memory alloy," Engineering Structures 24, pp. 325-332.
14. Dolce, M. and Cardone, D. [2001] "Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension," International Journal of Mechanical Sciences 43, pp. 2657-2677.
15. Dolce, M. and Marnelto, R. [1999] "Seismic devices based on shape memory alloy," MANSIDE Project, II105-134.
16. Duerig, T., Pelton, A. and Stockel, D. [1999] "An overview of nitinol medical applications," Materials Science and Engineering A273-275, pp. 149-160.
17. Duerig, T., Pelton, A. and Stockel, D. [1997] "Superelastic nitinol for medical device," Medical Plastics and Biomaterial Magazine, March.
18. Eaton, J. [1999] "Feasibility study of using passive SMA absorbers to minimise secondary system structural response," Master Thesis, Worcester Polytechnic Institute, MA.
19. eSMART [2002] http://www.cs.ualberta.ca/database/MEMS/sma_ mems/index2.html.
20. Friend, C. and Morgan, N. [1999] "Fatigue/cyclic stability of shape-memory alloys," SMST-99: Proceedings of the First European Conference on Shape Memory and Superelasticity, pp. 115-128.
21. Higashino, M. [1996] "Experimental and analytical studies of structural control system using shape memory alloy," Second International Workshop on Structural Control, December 18-21, pp. 221-232.
22. Inaudi J. and Kelly, J. [1994] "Experiments on tuned mass dampers using visco-elastic, frictional, and shape memory alloy materials," First World Conference on Structural Control, August 3-5, pp. 127-136
23. Indirli, M., Castellano, M., Clemente, P. and Martelli, A. [2001] "Demo-application of shape memory alloy devices: The rehabilitation of the S. Giorgio Church bell-tower," Proceedings of SPIE, Smart Structures and Materials.
24. Jackson, C., Wagner, H. and Wasilewski, R. [1972] "55-Nitinol - The alloy with a memory: Its physical metallurgy, properties, and applications," National Aeronautics and Space Administration, Report NASA-SP 5110.
25. Kaounides, L. [1995] "Advanced materials - Corporate strategies for competitive advantages in the 1990s," FT Management Reports, Pearson Professional Ltd., London.
26. Kolomytsev, V., Kozlov, A., Seerneels, A., Moorleghm, W. and Aslanidis, D. [1998] "Effect of strain rate and sample size on features of non-linear deformation behaviour in TiNi-based ribbons and wires," XXYIII Symposium of UIA, May 13-15.
27. Kovel, Y. and Monastyrsky, G. [1995] "On the nature of the variation of martensitic transformations hysteresis and SME characteristics in Fe-Ni-based Alloys," Journal de Physique IV, Colloque C8 5, pp. 397-402.
28. Krumme, R., Hayes, J. and Sweeney, S. [1995] "Structural damping with shape memory alloys: One class of devices," Proceedings of SPIE [The International Society for Optical Engineering], Smart Structures and Materials Conference, San Diego, CA, Paper No. 2445-21.
29. Lin, H., Wu, S. and Yeh, M. [1993] "Damping characteristics of NiTi shape memory alloys," Metall. Mater. A 24, pp. 2189-2194.
30. Liu, Y. and Van Humbeeck, J. [1997] "On the damping behaviour of NiTi shape memory alloy," Journal de Physique, Coll. IV 7, C5-519.
31. Liu, Y., Zeliang, X. and Van Humbeeck, J. [1999] "Cyclic deformation of NiTi shape memory alloys," Materials Science & Engineering A273-275, pp. 673-678.
32. MANSIDE [1998], "Memory alloys for new structural vibrations isolating devices," MANSIDE Third Twelve Monthly Progress Report.
33. Miyazaki, S. [1990] "Thermal and stress cycling effects and fatigue properties of Ni-Ti alloys," Engineering Aspects of Shape Memory Alloys, pp. 394-413.
34. NDC, Nitinol Devices & Components [2001] 〈http://www.nitinol. com〉, November.
35. Ocel, J., Leon, R., DesRoches, R., Krumme, R., Hayes, J. and Sweeney, S. [2002] "High damping steel beam-column connections using shape memory alloys," Proceedings from the 7th US National Conference in Earthquake Engineering, Boston, Massachusetts.
36. Ohi, K. [2001]. "Pseudo-dynamic earthquake response tests and cyclic loading tests on steel frames including pseudo-elastic elements," NSF-JSPS, US-Japan Seminar on Advanced Stability and Seismicity Concept for Performance-based Design of Steel and Composite Structures, Kyoto, Japan.
37. O'Leary, J., Nicholson, J. and Gatturna, R. [1990] "The use of Ni-Ti in Homer Mammalock®," Engineering Aspects of Shape Memory Alloys, pp. 477-482.
38. Picornell, G., Sade, M. and Cesari, E. [1994] "Characteristics of the martensitic transformation and the induced two-way shape memory effect after training by compressive pseudoelastic cycling in Cu-Zn-Al single crystals," Metall. and Mater. Trans. 25A, pp. 687-695.
39. Piedboeuf, M., Gauvin, R. and Thomas, M. [1998], "Damping behaviour of shape memory alloys: Strain amplitude, frequency and temperature effects," Journal of Sounds and Vibrations 214, pp. 885-901.
40. Pixl [2002], Pixl Golf Company, http://www.pixlgolf.com.
41. Sachdeva, R. and Miyazaki, S. [1990] "Superelastic Ni-Ti alloys in orthodontics," Engineering Aspects of Shape Memory Alloys, pp. 452-469.
42. Scherngell, H. and Kneissl, A. [1999] "Influence of the microstructure on the stability of the intrinsic two-way shape memory effect," Materials Science and Engineering A273-275, pp. 400-403.
43. Schetky, L. [1999], "The industrials applications of shape memory alloys in North America," SMST-99: Proceedings of the First European Conference on Shape Memory and Superelastic Technologies, pp. 248-255.
44. Sehitoglu, H., Anderson, R., Karaman, I., Gall, K. and Chumlyakov, Y. [2001] "Cyclic deformation behaviour of single crystal NiTi," Materials Science and Engineering A314, pp. 67-74.
45. Serneels, A. [1999] "Shape memory alloy characterization and optimization," SMST-99: Proceedings of the First European Conference on Shape Memory and Superelasticity, pp. 6-23.
46. Strnadel, B., Ohashi, S., Ohtsuka, H., Ishihara, T. and Miyazaki, S. [1995] "Cyclic stress-strain characteristics of Ti-Ni and Ti-Ni-Cu shape memory alloys," Materials Science and Engineering A202, pp. 148-156.
47. Sweeney, S. and Hayes, J. [1995] "Shape memory alloy dampers for seismic rehabilitation of existing buildings," Wind and Seismic Effects, Proceedings of the 27th Joint Meeting.
48. Tobushi, H., Iwanaga H., Tanaka, K., Hori, T. and Sawada, T. [1992] "Stress-strain-temperature relationships of TiNi shape memory alloy suitable for thermomechanical cycling," JSME Int. J. 35(3), pp. 271-277.
49. Tobushi, H., Yamada, S., Hachisuka, T., Ikai, A. and Tanaka, K. [1996] "Thermo-mechanical properties due to martensitic and reversible-phase transformations of TiNi shape memory alloy subjected to cyclic loading's," Smart Material Structures 5, pp. 788-795.
50. Valente, C., Cardone, D., Lamunaca, B. and Penzo, F.[1999] "Shaking table tests of structures with conventional and SMA based protection devices," MANSIDE Project, II177-192.
51. Van Humbeeck, J. [1999] "Non-medical applications of shape memory alloys," Materials Science & Engineering A273-275, pp. 134-148.
52. Whittaker, A., Krumme, R., Sweeney, S. and Hayes, J. [1995] "Structural control of buildings response using shape memory alloys," US Army Corps of Engineers Research Laboratories Technical Report 22.
53. Wilde, K., Gardoni, P. and Fujino, Y. [2000] "Base isolation system with shape memory alloy device for elevated highway bridges," Engineering Structures 22, pp. 222-229.
54. Wolons, D., Gandhi, F. and Malovrh, B. [1998] "Experimental investigation of the pseudoelastic hysteresis damping characteristics of shape memory alloy wires," Journal of Intelligent Material Systems and Structures 9, pp. 116-126.
55. Xie, Z., Liu, Y. and Van Humbeeck, J. [1998] "Microstructure of NiTi shape memory alloy due to tension-compression cyclic behaviour," Acta Mater 46(6), pp. 1989-2000.
56. Zhao, C. [2001] "Shape memory stainless steels," Advanced Materials and Processes, pp. 33-35.