Design capabilities of powder injection molded materials

Journal of Advanced Materials

Volumn 37, Issue 3, 2005, Pages 51-59

  Johnson, John L ^a   German, Randall M ^b  

^a AMTellect Inc   (United States)

^b The Pennsylvania State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DESIGN FOR TESTABILITY; FABRICATION; MATERIALS TESTING; POWDER COATINGS;

GEOMETRIC ATTRIBUTES; POWDER INJECTION MOLDED MATERIALS;

INJECTION MOLDING;

EID: 33646440218     PISSN: 10709789     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (60)

1. R.M. German and A. Bose, "Injection Molding of Metals and Ceramics," Metal Powder Industries Federation, Princeton, NJ, 1997.
2. L.K. Tan and M. Jan, "Characterization of Powder Injection Molded Aluminum," Advances in Powder Metallurgy and Particulate Materials, R. Lawcock and M. Wright (eds.), Metal Powder Industries Federation, Princeton, NJ, 2003, pp. 8.282-8.288.
3. S.T. Lin and R.M. German, "Mechanical Properties of Fully Densified Injection Molded Carbonyl Iron Powder," Metallurgical Transactions, 1990, Vol. 21A, pp. 25312538.
4. T. Baba, Y. Yamanishi, T. Honda, and H. Miura, "Fatigue Failure Test for High Strength MIM Sintered Alloy Steels," Journal of the Japan Society of Powder and Powder Metallurgy, 1996, Vol. 43, pp. 863-867.
5. H. Zhang and R.M. German, "Sintering MIM FeNi Alloys," International Journal of Powder Metallurgy, 2002, Vol. 38, No. 1, pp. 5161.
6. M. Murakami, R. Kanazawa, A. Yanagitani, and Y. Tanaka, "Characteristics of Fe - 9.6% Si - 5.4% Al Powder Produced by Metal Injection Molding with Gas Atomized Powder," Journal of the Japan Society of Powder and Powder Metallurgy, 1991, Vol. 38, pp. 820-823.
7. Y. Masai, M. Ishida, S. Tanaka, and K. Nishiyabu, "Evaluation on Mechanical Properties and Functionallties of Anti-Bacteria and Resist-Corrosion for Cu-Added Stainless Steel (SUS304L) by MIM," Journal of the Japan Society of Powder and Powder Metallurgy, 2002, Vol. 49, pp. 834-840.
8. H. Mirua, S. Mitomi, S. Ando, and T. Honda, "Effects of Homogeneous and Heterogeneous Structures on the Properties of Sintered Alloy Steels by MIM," Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol. 42, pp. 378382.
9. K.S. Hwang and M.Y Hsiao, "Mechanical Properties of FeNi Injection Molded Parts Made from Composite Powders," Powder Injection Molding Symposium 1992, P.H. Booker, J. Gaspervich, and R.M. German (eds.), Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 53-66.
10. H. Jinushi, H. Kyogoku, K. Shinohara, and S. Okamoto, "Effect of Addition of Carbon on Sintering Behavior of FeNi Compacts Shaped by Injection Molding," Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol. 42, pp. 357362.
11. M.K. Bulger and A.R. Erickson, "Fatigue Properties of MIM Fe-7% Ni and 17-4 PH," Powder Injection Molding Symposium 1992, P. H. Booker, J. Gaspervich and R. M. German (eds.), Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 493-508.
12. S. Bannerjee, "Structure - Property Relationship of Metal Injection Molded 17-4 PH Orthodontic Parts," Powder Injection Molding Symposium 1992, P. H. Booker, J. Gaspervich and R.M. German (eds.), Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 181-192.
13. H. Zhang and R.M. German, "Powder Injection Molding of 17-4 PH Stainless Steel," Powder Injection Molding Symposium 1992, P.H. Booker, J. Gaspervich, and R.M. German (eds.), Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 219-227.
14. R.M. German and D. Kubish, "Evaluation of Injection Molded 17-4 PH Stainless Steel Using Water Atomized Powder," International Journal of Powder Metallurgy, 1993, Vol. 29, No. 1, pp. 47-62.
15. J.J. Valencia, T.J. Mccabe, and H. Dong, "Microstructure and Mechanical Properties of Powder Injection Molded 17-4 PH Stainless Steel for Aircraft Engine Components," Advances in Powder Metallurgy and Particulate Materials - 1995, Metal Powder Industries Federation, Princeton, NJ, 1995, pp. 6.205-6.214.
16. T. Baba, H. Miura, T. Honda, and Y. Tokuyama, "Properties of 17-4 PH Stainless Steels Produced by Metal Injection Molding Process," Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol. 42, pp. 1119-1123.
17. T. Babe, H. Miura, T. Honda, and Y. Tokuyama, "High Performance Properties of Injection Molded 17-4 PH Stainless Steel," Advances in Powder Metallurgy and Particulate Materials - 1995, Metal Powder Industries Federation, Princeton, NJ, 1995, pp. 6.271-6.278.
18. P.K. Minuth, P. Kunert, D. Meinhardt, G. Velti, L. Kramer, and T. Hartwid, "Mechanical Properties of MIM Parts Produced from Mixtures of Stainless Steel," 17-4 PH Competitive Advantages by Near-Net-Shape Manufacturing, H.D. Kunze (ed.), DGM Informations- gellschaft, Frankfurt, Frankfurt, Germany, 1997, pp. 303-308.
19. K.A. Green, "PIM 17-4 PH Actuator Arm for Aerospace Applications," Advances in Powder Metallurgy and Particulate Materials - 1998, Metal Powder Industries Federation, Princeton, NJ, 1998, pp. 5.119-5.130.
20. J.C. Lasalle, B. Sherman, and K. Bartone, "Microstructure and Mechanical Properties of Aqueous Based Binder Metal Injection Molded 17-4 PH Stainless Steel for Aircraft Engine Components," Advances in Powder Metallurgy and Particulate Materials - 1999, Metal Powder Industries Federation, Princeton, NJ, 1999, pp. 6.19-6.26.
21. W. Wu, R.M. German, D. Blaine, B. Marx, and C. Schlaefer, "Effects of Residual Carbon Content on Sintering Shrinkage, Microstructure and Mechanical Properties of Injection Molded 17-4 PH Stainless Steel," Journal of Materials Science, 2002, Vol. 37, pp. 3573-3583.
22. H. Wohlfromm, M. Blömacher, and D. Weinand, "Metal Injection Molding of Titanium and TiAl6V4," Powder Injection Molding Technologies, R.M. German, H. Wiesner, and R.G. Cornwall (eds.), State College, PA, Innovative Material Solutions, 1998, pp. 339-348.
23. K. Kato, "Effect of Sintering Temperature on Density and Tensile Properties of Titanium Compacts by Metal Injection Molding," Journal of the Japan Society of Powder and Powder Metallurgy, 1999, Vol. 46, pp. 865-869.
24. H. Wang, S.H.J. Lo, and J.R. Barry, "Development of High Density (99%+) Powder Injection Molded Titanium Alloys," P/M Science and Technology Briefs, 1999, Vol. 1, No. 5, pp. 16-18.
25. H. Miura, T. Masuda, T. Ogasawara, and Y. Kankawa, "High Performance Injection Molded Ti Compacts," Journal of the Japan Society of Powder and Powder Metallurgy, 2002, Vol. 49, pp. 825-828.
26. H. Nakamura, T. Shimura, and K. Nakabayashi, "Process for Production of Ti Sintered Compacts Using the Injection Molding Method," Journal of the Japan Society of Powder and Powder Metallurgy, 1999, Vol. 46, pp. 870876.
27. R. Tandon, "Net-shaping of Co-Cr-Mo (F-75) via Metal Injection Molding," Cobalt-Base Alloys for Biomedical Applications, ASTM STP 1365, J.A. Disegi, R.L. Kennedy, and R. Pilliar (eds.), West Conshohocken, PA, American Society for Testing and Materials, 1999, pp. 3-10.
28. H. Miura, S. Noda, S. Ando, and T. Honda, "Fabrication of Maraging Steels by Metal Injection Molding Process," Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol. 42, pp. 353-356.
29. K.F. Hens, J.A. Grohowski, R.M. German, J.J. Valencia, and T. McCabe, "Processing of Superalloys via Powder Injection Molding," Advances in Powder Metallurgy and Particulate Materials - 1994, Metal Powder Industries Federation, Princeton, NJ, 1994, Vol. 4, pp. 137-148.
30. H. Miura, H. Gondou, and T. Honda, "Effects of Powder Characteristics on the Metal Injection Molding Process of High Speed Steels," Journal of the Japan Society of Powder and Powder Metallurgy, 1994, Vol. 41, pp. 9-13.
31. A. Varez, J. Portuondon, B. Levenfeld, and J.M. Torralba, "Processing of P/M T15 High Speed Steels by Mould Casting Using Thermosetting Binders," Materials Chemistry and Physics, 2001, Vol. 67, pp. 4348.
32. T.S. Wei and R.M. German, "Injection Molded Tungsten Heavy Alloy," International Journal of Powder Metallurgy, 1988, Vol. 24, No. 4, pp. 327-335.
33. H. Eifert, F. Petzoldt, T. Hartwig, L. Kramer, and G. Veltl, "A Case Study for a Complex Shaped Part Made by Powder Injection Molding of a Tungsten Heavy Alloy," Tungsten Refractory Metals and Alloys 4, A. Bose and R.J. Dowding (eds.), Metal Powder Industries Federation, Princeton, NJ, 1998, pp. 357363.
34. T. Baba, T. Honda, and H. Miura, "Effects of Homogeneous and Heterogeneous Microstructures on the Fatigue Properties of 4600 Steels Produced by MIM Process," Journal of the Japan Society of Powder and Powder Metallurgy, 1997, Vol. 44, pp. 443-447.
35. J. Ebenhoch and W. Hesse, "Injection Molding of Hardmetals Using a Polyacetal Based Binder System," Advances in Powder Metallurgy and Particulate Materials - 1994, Metal Powder Industries Federation, Princeton, NJ, 1994, Vol. 4, pp. 261-271.
36. 4 Prechamber Combustion Insert," Interceramic, 1987, Vol. 36, No. 5, pp. 5053.
37. J.P. Clark, "Economics of Injection Molded Ceramic Auto Engine Parts," Proceedings Markets for Injection Molded Metal, Ceramic, and Hardmetal Parts, Gorham Advanced Materials Institute, Gorham, ME, March 1994.
38. B.C. Mutsuddy and R.G. Ford, Ceramic Injection Molding, Chapman and Hall, London, UK, 1995.
39. J.A. Mangels and W. Trela, "Ceramic Components by Injection Molding," Forming of Ceramics, J.A. Mangels and G.L. Messing (eds.), American Ceramic Society, Columbus, OH, 1984, pp. 220-233.
40. M.T. Martyn and P.J. James, "The Processing of Hardmetal Components by Powder Injection Molding," International Journal of Refractory Metals and Hard Materials, 1994, Vol. 12, pp. 61-69.
41. M.R. Pascucci and R.N. Katz, "Modern Day Application of Advanced Ceramics," Powder Mettallurgy International, 1993 Vol. 42, No. 2, pp. 71-78.
42. W.J. Sherwood, C.K. Witmarsh, J.M. Jacobs, and L.V. Iterrante, "Low Cost, Near Net Shape Ceramic Composites Using Resin Transfer Molding and Pyrolysis (RTMP)," Ceramic Engineering and Science Proceedings, Issue 4, American Ceramic Society, Westerville, OH, 1996, pp. 174-181.
43. T.J. Whalen, J.E. Noakes, and L.L. Turner, "Progress on Injection Molded, Reaction Bonded SiC," Ceramics for High Performance Applications II, J.J. Burke, E.N. Leone and R.N. Katz (eds.), Brook Hill Publishing Co., Chestnut Hill, MA, 1978, pp. 179-189.
44. H. Wohlfromm, M. Blömacher, D. Weinand, P.J. Uggowitzer, and M.O. Spediel, "Novel Stainless Steels for Metal Injection Molding," Proceedings of the 1998 PM World Congress, Granada, Spain, published on CD by the European Powder Metallurgy Association, 1998.
45. H. Wohlfromm, M. Blömacher, P.J. Uggowitzer, R. Magdowski, and M.O. Spediel, "Corrosion Resistance of MIM Stainless Steels," Advances in Powder Metallurgy and Particulate Materials - 1999, Metal Powder Industries Federation, Princeton, NJ, 1999, pp. 6.27-6.38.
46. R. Tandon, J.W. Simmons, B.S. Covino, and J.H. Russel, "Mechanical and Corrosion Properties of Nitrogen-Alloyed Stainless Steels Consolidated by MIM," International Journal of Powder Metallurgy, 1998, Vol. 34, No. 8, pp. 47-54.
47. M.K. Bulger and A.R. Erickson, "Corrosion Resistance of MIM Stainless Steels," Advances in Powder Metallurgy and Particulate Materials - 1994, Metal Powder Industries Federation, Princeton, NJ, 1994, Vol. 4, pp. 197-215.
48. S. Collins, "Corrosion Registance of MIM 316L", Advances in Powder Metallurgy and Particulate Materials - 2002," Metal Powder Industries Federation, Princeton, NJ, 2002, pp. 10.240-10.254.
49. J.L. Johnson and E.J. Westcot, "Metal Injection Molding of Commercially Pure Nickel for the Chemical Processing Industry," International Journal of Powder Metallurgy, 2003, Vol. 39, No. 8, pp.
50. H. Miura, "Fabrication of High Performance Sintered Materials Through PIM," Proceedings of the 2000 Powder Metallurgy World Congress, Part 1, K. Kosuge and H. Nagai (eds.), Japan Society of Powder and Powder Metallurgy, Kyoto, Japan, 2000, pp. 315-319.
51. C. Lall and L.W. Baum, "High Performance Soft Magnetic Components by Powder Metallurgy and Metal Injection Molding," Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, 1988, Vol. 18, pp. 363-389.
52. J. Lasalle, "Aqueous Binder Allows Economic Net Shape Processing of Larger MIM Parts," Metal Powder Report, 2000, Vol. 55, No. 6, pp. 2631.
53. J.J. Springer and R. Fallback, "Large Dimension Products with Special Design Criteria," Powder Injection Moulding, Proceedings of the First European Symposium on Powder Injection Moulding, European Powder Metallurgy Association, Shrewsbury, UK, 1997, pp. 192-198.
54. J.R.G. Evans, "Progress in Injection Moulding Large Sections," Second European Symposium on Powder Injection Moulding, European Powder Metallurgy Association, Shrewsbury, UK, 2000, pp. 77-83.
55. V. Piotter, T. Gietzelt, K. Plewa, R. Ruprecht, and J. Hausselt, "Tiny Parts Made by Micro Powder Injection Molding," Advances in Powder Metallurgy & Particulate Materials - 2001, Metal Powder Industries Federation, Princeton, NJ, 2001, pp. 4.199-4.207.
56. V. Piotter, T. Benzler, T. Hanemann, H. Wollmer, R. Ruprecht, and J. Haubelt, "Innovative Molding Technologies for the Fabrication of Components for Microsystems," Proceedings of SPIE - The International Society for Optical Engineering, Society of Photo-Optical Instrumentation Engineers, 1999, Vol. 3680, pp. 456-463.
57. T. Harwig and T.V. Duong, "Miniaturisation of MIM," Second European Symposium on Powder Injection Moulding, European Powder Metallurgy Association, Shrewsbury, UK, 2000, pp. 229-234.
58. Z.Y. Liu, N.H. Loh, S.B. Tor, K.A. Khor, Y. Murakoshi, and R. Maeda, "Production of Micro Components by Micro Powder Injection Molding," Journal of Materials Science Letters, 2001, Vol. 20, No. 4, pp. 307-309.
59. V. Piotter, T. Gietzelt, L. Merz, R. Ruprecht, and J. Hausselt, "PIM Enters Microsystems Technology," P/M Science & Technology, 2002, Vol. 4, pp. 18-23.
60. T. Benzler, V. Piotter, T. Hanemann, K. Mueller, P. Norajitra, and R. Ruprecht, "Innovations in Molding Technologies for Microfabrication," Proceedings of SPIE-The International Society for Optical Engineering, Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, 1999, Vol. 3874, pp. 53-60.