Effect of mean stress on fretting fatigue of Ti-6Al-4V on Ti-6Al-4V

Fatigue and Fracture of Engineering Materials and Structures

Volumn 29, Issue 1, 2006, Pages 41-55

  Lovrich, N R ^a   Neu, Rick W ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Fretting fatigue; Knockdown factor; Mean stress; Stress singularity; Ti 6Al 4V

Indexed keywords

CRACK INITIATION; CRACKS; FATIGUE OF MATERIALS; FATIGUE TESTING; INTERFACES (MATERIALS); STRESSES; TRIBOLOGY;

CONTACT INTERFACE; FRETTING CRACKS; FRETTING FATIGUE; FRICTION COEFFICIENT; KNOCKDOWN FACTOR; MEAN STRESS; STRESS SINGULARITY;

TITANIUM ALLOYS;

EID: 33646013564     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2006.00959.x     Document Type: Article

References (39)

1. Donachie, M. J. (2000) Titanium: A Technical Guide, Second Edition, ASM International, Materials Park, Ohio, USA.
2. Anton, D. L. (1999) Simultaneous Fretting and Fatigue of α/β Ti-6Al-4V. In: Proceedings of the 4th National Turbine Engine High Cycle Fatigue Conference, Monterey, CA, Universal Technology Corp., Dayton, Ohio.
3. Farris, T. N., Harish, G., McVeigh, P. A. and Murthy, H. (2000) Prediction and Observation of Fretting Fatigue of Ti-6Al-4V Subjected to Blade/Disk Type Contacts. In: Proceedings of the 5th National Turbine Engine High Cycle Fatigue Conference, Chandler, AZ, Universal Technology Corp., Dayton, Ohio.
4. Hutson, A. L. and Nicholas, T. (2000) Fretting Fatigue Behavior of Ti-6Al-4V against Ti-6Al-4V under Flat-on-Flat Contact with Blending Radii. Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials, West Conshohocken, PA, pp. 308- 321.
5. Hutson, A. L., Nicholas, T., Olson, S. E. and Ashbaugh, N. E. (2001) Effect of sample thickness on local contact behavior in a flat-on-flat fretting fatigue apparatus. Int. J. Fatigue 23, S445-S453.
6. Wallace, J. M. and Neu, R. W. (2003) Fretting fatigue crack nucleation in Ti-6Al-4V. Fatigue Fract. Engng Mater. Struct. 26, 199-214.
7. Pape, J. A. and Neu, R. W. (1999) Influence of contact configuration in fretting fatigue testing. Wear 225-229, 1205- 1214.
8. Sato, K., Fujii, H. and Kodama, S. (1986) Effects of stress ratio and fretting fatigue cycles on the accumulation of fretting fatigue damage to carbon steel S45C. Bull. Japan Soc. Mech. Eng. 29, 2759-2764.
9. Hoeppner, D. W. and Goss, G. L. (1974) A fretting-fatigue damage threshold concept. Wear 27, 61-70.
10. Lutynski, C., Simansky, G. and McEvily, A. J. (1982) Fretting fatigue of Ti-6Al-4V steel. Materials Evaluation Under Fretting Conditions, ASTM STP 780, American Society for Testing and Materials, West Conshohocken, PA, pp. 150-164.
11. Nakazawa, K., Sumita, M. and Maruyama, N. (1992) Effect of contact pressure on fretting fatigue of high strength steel and titanium alloy. Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (Edited by M. Helmi Attia and R. B. Waterhouse). American Society for Testing Materials, Philadelphia, pp. 115-125.
12. Iyer, K. and Mall, S. (2000) Effects of cyclic frequency and contact pressure on fretting fatigue under two-level block loading. Fatigue Fract. Engng. Mater. Struct. 23, 335-346.
13. Gallagher, J. P. Ed. (2001) Improved high cycle fatigue (HCF) life prediction. Final Report. UDRI Report no. UDR-TR-1999-00079, U.S. Air Force Contract no. F33615-96-5269.
14. Swalla, D. R., Neu, R. W. and McDowell, D. L. (2004) Microstructural characterization of Ti-6Al-4V subjected to fretting. J. Tribol. 126, 809-816.
15. Ritchie, R. O., Boyce, B. L., Campbell, J. P., Roder, O., Thompson, A. W. and Milligan, W. W. (1999) Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy. Int. J. Fatigue 21, 653-662
16. Lovrich, N. R. (2004) Fretting fatigue of Ti-6Al-4V: Experimental characterization and simple design parameter. M.S. Thesis, Georgia Institute of Technology, Atlanta, GA.
17. Cattaneo, C. (1938) Sul contatto di due corpi elastici: Distribuzione locale degli sforzi. Rendiconti dell Accademia Nazionale dei Lincei 27, 342-348, 434-436, 474-478.
18. Mindlin, R. D. (1949) Compliance of elastic bodies in contact. J. Appl. Mech. 16, 259-268.
19. Hills, D. A. and Nowell, D. (1994) Mech. Fretting Fatigue, Kluwer Academic Publishers, Dordrecht, The Netherlands.
20. Fouvry, S., Kapsa, P., Sidoroff, F. and Vincent, L. (1998) Identification of the characteristic length scale for fatigue cracking in fretting contacts. Journal de Physique IV France 8, Pr8-159-Pr8-166.
21. Bellows, R., Smith, P., Shepard, M. and Eylon, D. (1999) Step test, stress ratio, and surface effects on the high cycle fatigue behavior of Ti-6Al-4V. In: Proceedings of the 4th National Turbine Engine High Cycle Fatigue Conference, Monterey, CA, Universal Technology Corp., Dayton, Ohio.
22. Jaffee, R. I. and Lütjering, G. (1987) Effect of microstructure and loading condition on fatigue of Ti-6Al-4V. In: Proceedings of the TMS-AIME Annual Symposia on Effect of Microstructure on Fracture Toughness and Fatigue Crack Growth Rate in Titanium Alloys, Denver, CO.
23. Swalla, D. R. and Neu, R. W. (2002) Unpublished data.
24. Walker, K. (1970) The Effect of Stress Ratio during Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum. Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462. American Society for Testing and Materials, West Conshohoken, PA, pp. 1-14.
25. Rice, R. C., Jackson, J. L., Bakuckas, J. and Thompson, S. (2003) Metallic Materials Properties Development and Standardization (MMPDS). Scientific Report No. DOT/FAA/AR-MMPDS-01, U.S. Department of Transportation, Federal Aviation Administration, January 2003.
26. Hattori, T., Sakata, S. and Watanabe, T. (1988) A stress singularity parameter approach for evaluating adhesive and fretting strength. Advances in Adhesively Bonded Joints, MD-Vol. 6 (Edited by S. Mall K. M. Liechti and J. R. Vinson). ASME, New York, NY. pp. 43-50.
27. Hattori, T. and Nakamura, M. (1994) Fretting fatigue evaluation using stress singularity parameters at contact edges. Fretting Fatigue, ESIS 18 (Edited by R. B. Waterhouse and T. C. Lindley). Mechanical Engineering Publications, London, pp. 453-460.
28. Hattori, T., Nakamura, M. and Watanabe, T. (2003) Simulation of fretting-fatigue life by using stress-singularity parameters and fracture mechanics. Tribol. Int. 36, 87-97.
29. Giannakopoulos, A. E., Lindley, T. C. and Suresh, S. (1998) Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction methodology for fretting fatigue. Acta Mater. 46, 2955-2968.
30. Ahmad, J. and Santhosh, U. (2003) Small scale yielding in fretting fatigue. In: Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference, Monterey, CA., Universal Technology Corp., Dayton, OH.
31. Mutoh, Y. and Xu, J.-Q. (2003) Fracture mechanics approach to fretting fatigue and problems to be solved. Tribol. Int. 36, 99-107.
32. Mutoh, Y., Xu, J.-Q. and Kondoh, K. (2003) Observations and analysis of fretting fatigue crack initiation and propagation. Fretting Fatigue: Advances in Basic Understanding and Applications, ASTM STP 1425 (Edited by Y. Mutoh, S. E. Kinyon and D. W. Hoeppner). ASTM International, West Conshohocken, PA, pp. 61-75.
33. Mugadu, A. and Hills, D. A. (2002) A generalised stress intensity approach to characterising the process zone in complete fretting contacts. Int. J. Solids Struct. 39, 1327-1335.
34. Mugadu, A. and Hills, D. A. (2003) The evolution of the process zone when a complete contact is subject to cyclically varying loads. Int. J. Solids Struct. 40, 4417-4435.
35. Mugadu, A., Hills, D. A. and Limmer, L. (2003) A Theoretical and experimental procedure for predicting the fretting fatigue strength of complete contacts. Fretting Fatigue: Advances in Basic Understanding and Applications, ASTM STP 1425 (Edited by Y. Mutoh, S. E. Kinyon and D. W. Hoeppner). ASTM International, West Conshohocken, PA, pp. 145-155.
36. Swalla, D. R. and Neu, R. W. (2003) Characterization of Fretting Fatigue Process Volume Using Finite Element Analysis. Fretting Fatigue: Advances in Basic Understanding and Applications, ASTM STP 1425 (Edited by Y. Mutoh, S. E. Kinyon and D. W. Hoeppner). ASTM International, West Conshohocken, PA, pp. 89-107.
37. Naboulsi, S. and Mall, S. (2003) Fretting fatigue crack initiation behavior using process volume approach and finite element analysis. Tribol. Int. 36, 121-131.
38. Johnson, K. L. (1985) Contact Mechanics. Cambridge University Press, New York.
39. Campbell, J. P. and Ritchie, R. O. (2000) Mixed-mode, high-cycle fatigue-crack growth thresholds in Ti-6Al-4V, Part I. A comparison of large- and short-crack behavior. Engng Fract. Mech. 67, 209-227.