Rolling-contact fatigue of surface-densified gears

International Journal of Powder Metallurgy (Princeton, New Jersey)

Volumn 42, Issue 1, 2006, Pages 17-29

  Lawcock, Roger ^a  

^a Stackpole Limited   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

DURABILITY; MICROSTRUCTURE; POWDER METALLURGY; SHEAR STRESS; STRESS ANALYSIS;

BENDING-FATIGUE DURABILITY; ROLLING-CONTACT FATIGUE (RCF); SHEAR-STRENGTH PROFILES;

CRACKS;

EID: 33644984509     PISSN: 08887462     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (53)

1. P.K. Jones, K. Buckley-Golder, R. Lawcock and R. Shivanath, "Densification Strategies for High Endurance PM Components", Int. J. Powder Metall. 1997, vol. 33, no. 3, pp. 37-44.
2. P. K. Jones, K. Buckley-Golder and D. Sarafinchan. "Developing PM Gear Tooth and Bearing Surfaces for High Stress Applications", Int. J. Powder Metall, 1998, vol. 34, no. 1, pp. 26-33.
3. R. Lawcock, K. Buckley-Golder and D. Sarafinchan, "Testing of High Endurance PM Steels for Automotive Transmission Gearing Components", 1999, Soc. Automotive Engineers. Warrendale, PA, Paper No. 1999-01-0293.
4. C. Cole, UK Patent No. GB 2,250,227A, June 3, 1992.
5. P.K. Jones and K. Buckley-Golder, US Patent No. 5,540,883, July 30, 1996.
6. C. Cole, R. Shivanath and P.K. Jones, US Patent No. 5,884,527, March 23, 1999.
7. D. Sarafinchan, P.K. Jones, K. Buckley-Golder and H. David, "Powder Metal Bearings and Gears with Steel Like Performance", 2001, Soc. Automotive Engineers, Warrendale. PA, Paper No. 2001-01-0401.
8. Y. Takeya, T. Hayasaka and M. Suzuki, "Surface Rolling of Sintered Gears", Metal Powder Report. 1982, vol. 37, no. 9, pp. 467-470.
9. G. Rau, L. Sigl and M. Krehl, "Highly Loaded PM Gears Produced by Selective Surface Densification", 2003, Soc. Automotive Engineers, Warrendale, PA, Paper No. 2003-01-0334.
10. R. Slattery and F. Hanejko, "PM of High Density Helical Gears", Advances in Powder Metallurgy and Particulate Materials, compiled by R. Lawcock and M. Wright, Metal Powder Industries Federation, Princeton, NJ, 2003, Part 9. pp. 56-72.
11. S. Bengtsson, L. Fordén and M. Bergström, "High Performance Gears", Advances in Powder Metallurgy and Particulate Materials, compiled by R.A. Chernenkoff and W.B. James, Metal Powder Industries Federation, Princeton, NJ, 2004, Part 12, pp. 27-34.
12. W. Jandeska, G. Hoffman, R. Slattery, F. Hanejko, A. Rawlings and T. Murphy, "Rolling Contact Fatigue of Surface Densified Material: Microstructural Aspects", Advances in Powder Metallurgy and Particulate Materials ibid, reference no. 11, Part 10, pp. 35-52.
13. D.W. Dudley. Handbook of Practical Gear Design, 1994. CRC Press, Boca Raton, FL.
14. S.P. Timoshenko and J.N. Goodier, Theory of Elasticity, Third Edition, McGraw-Hill, New York, NY, 1970, pp. 409-420.
15. A.P. Boresi, R.J. Schmidt and O.M. Sidebottom, Advanced Mechanics of Materials, Fifth Edition, J. Wiley & Sons, New York, NY, 1993, pp. 692-731.
16. J.O. Smith and C.K. Liu. "Stresses Due to Tangential and Normal Loads on an Elastic Solid with Application to Contact Stress Problems", J. App. Mech., 1953, vol. 20, no. 2, pp. 157-166.
17. C.J.Yu and T. Prucher, "Measuring Youngs Modulus and Shear Modulus - A Comparison of Dynamic and Mechanical Techniques", Advances in Powder Metallurgy & Particulate Material - 1993. vol. 1, compiled by A. Lawley and A. Swanson, Metal Powder Industries Federation, Princeton, NJ, 1993. pp. 273-286.
18. Materials Standards For PM Structural Parts, Standard 35, Metal Powder Industries Federation, Princeton. NJ, 2003.
19. I. Jubault, J.L. Mansot, P. Vergne and D. Mazuyer, "In Situ Pressure Measurements Using Raman Microspectroscopy In Rolling Elastohdrodynamic Contact", J. of Tribology, 2001, vol. 124. no. 1, pp. 114-120.
20. Gear Design AE15 Manufacturing and Inspection Manual Soc. Automotive Engineers, Warrendale, PA, 1990, pp. 34-56.
21. Appearance of Gear Teeth - Terminology of Wear and Failure, American National Standard, ANSI/AGMA 1010-E95, American Gear Manufacturers Association, Alexandria, VA, 1995.
22. R. Pederson and S.L. Rice, "Case Crushing of Carburized and Hardened Gears", Trans SAE, 1961, vol. 69, pp. 370-380.
23. G. Parrish, The Influence of Microstructure on the Properties of Case-Carburized Components, American Society for Metals, Metals Park, OH, 1980, pp. 140-165.
24. R.F. Kern, "Selecting Steels for Carburized Gears". Metal Progress, 1972, vol. 102, no. 1, pp. 53-64.
25. Design Guide for Vehicle Spur and Helical Gears, American National Standard, ANSI/AGMA, 6002-B93, American Gear Manufacturers Association, Alexandria, VA, 1993.
26. V.K. Sharma, G.H. Walter and D.H. Breen, "An Analytical Approach for Establishing Case Depth Requirements in Carburized Gears", Publication #77-DET-152, 1977, American Society of Mechanical Engineers, New York, NY.
27. K. Funatani, "Residual Stress and Fatigue Strength of Carburized Steels and Gears", 2002, Soc. Automotive Engineers, Warrendale, PA, Paper No. 2002-01-1559.
28. G. Albertini, G. Bruno, F. Fiori, M. Marcantoni and F. Turquier, "Residual Stresses in Case Hardened Automotive Steel Gears". Mat. Sci. Forum, 2002, Vols. 404-407, pp. 191-196.
29. Metals Handbook, Properties and Selection of Metals, Eighth Edition, 1961, American Society for Metals, Metals Park, OH, vol. 1, pp. 108-110.
30. J.A. Bannantine, J.J. Comer and J.L. Handrock, Fundamentals of Metal Fatigue Analysis, 1990, Prentice Hall, Upper Saddle River, NJ, pp. 244-254.
31. J.J. Coy and C.H. Chao, "A Method of Selecting Grid Size to Account for Hertz Deformation in Finite Element Analysis of Spur Gears", J. Mech. Des., ASME Trans. 1982, vol. 104, no. 4, pp. 759-766.
32. R.W. Cornell, "Compliance and Stress Sensitivity of Spur Gear Teeth", J. Mech. Des. ASME, 1981, vol. 103, no. 2, pp. 447-459.
33. Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth, American National Standard, ANSI/AGMA, 2001-C95, American Gear Manufacturers Association, Alexandria, VA, 1994.
34. Rolling Contact Fatigue Testing of Bearing Steels, edited by J.J.C. Hoo, Special Technical Publication 771, American Society for Testing and Materials, Philadelphia, PA, 1982.
35. J.P. Sheehan and M. Howes, The Effect of Case Carbon Content and Heat Treatment on Pitting Fatigue of 8620 Steel", 1972, Soc. Automotive Engineers, Warrendale, PA, Paper No. 720268.
36. D.I. Fletcher and J.H. Beynon, "Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing", J. Testing & Eng., 2000, vol. 28, no. 4, pp. 267-275.
37. Mechanical Design Handbook, edited by. H. A. Rothbart, 1996, McGraw-Hill, New York, NY, pp. 19-35.
38. E.E. Bisson and W.J. Anderson, Advanced Bearing Technology NASA SP-38. National Aeronautics and Space Administration, Washington, DC, 1964.
39. K.L. Johnson and D. Tabor, "Rolling Friction", Proc. Inst. Mech. Eng., 1967/1968, vol. 182. part 3a, pp. 168-179.
40. K. Lipp and G. Hoffmann, "Design For Rolling Contact Fatigue", Advances in Powder Metallurgy and Particulate Materials, compiled by V. Arnhold, C-L Chu. W.F. Jandeska, Jr. and H.I. Sanderow, Metal Powder Industries Federation, Princeton, NJ. 2002, part 5, pp. 28-52.
41. Roark's Formulas for Stress and Strain, Sixth Edition, W.C. Young. 1975, McGraw-Hill. New Yok, NY, pp. 647-663.
42. Y. Itoh, Y. Takeda, N. Motooka and Y. Kureha, "Improvement of the Rolling Contact Fatigue Strength of Sintered Steel for Transmission Component", 1989. Soc. Automotive Engineers, Warrnedale, PA, Paper # 890412.
43. T. Prucher and H.I. Sanderow, "Surface Fatigue of PM Alloys", Advances in Powder Metallurgy and Particulate Materials, compiled by C. Lall and A.J. Neupaver, Metal Powder Industries Federation, Princeton, NJ, 1994. vol. 2, pp. 99-111.
44. C.M. Sonsino and K. Lipp, "Rolling Contact Fatigue Properties of Selected PM Materials for Gear Box Applications", 1999, Soc. Automotive Engineers, Warrendale, PA, Paper # 1999-01-0333.
45. K. Michealis, Forschungsstelle fur Zahnrader und Getriebebau (FZG), Munich, private communication, 2004.
46. R. Link and G. Kotthoff, "Suitability of High Density Powder Metal Gears for Gear Applications", Gear Technology, 2001, Jan/Feb, pp. 15-18.
47. C. Bugiel, Werkzeumagschinenlabor (WZL), Aachen, private communication, 2004.
48. H.I. Sanderow and D. McPherson, "The Rolling Contact Fatigue Properties of PM Steel Alloys", Advances in Powder Metallurgy and Particulate Materials, compiled by V. Arnhold. C-L Chu, W.F. Jandeska, Jr. and H.I. Sanderow, Metal Powder Industries Federation, Princeton, NJ, 2002, part 5, pp. 53-74.
49. G.M. Hamilton and L.E. Goodman. "The Stress Field Created by a Circular Sliding Contact", J. App. Mech., 1966, vol. 33. no. 2, pp. 371-376.
50. G. Hoffmann, C.M. Sonsino and K. Michaelis, "Rolling Contact Fatigue - Component Design and Testing for PM Applications", 1999. Soc. Automotive Engineers, Warrendale, PA, Paper No. 1999-01-0332.
51. S. Ito, N. Tsushima and H. Muro, "Accelerated Rolling Contact Fatigue Testing by a Cylinder to Ball Rig", Rolling Contact Fatigue - Component Design and Testing for PM Applications ibid, reference no. 34, pp. 125-135.
52. T.M. Clark, G.R. Miller, L.M. Keer and H.S. Cheng, "The Role of Near Surface Inclusions in the Pitting of Gears", ASLE Trans, 1984. vol. 28, pp. 111-116.
53. I. Sugiura, S. Ito, N. Tsushima and H. Muro, "Investigation of Optimum Crowning in a Line Contact Cylinder to Cylinder Rolling Contact Fatigue Test Rig", ASLE Trans ibid. reference no. 34, pp. 136-149.