Low-back biomechanics and static stability during isometric pushing

Human Factors

Volumn 47, Issue 3, 2005, Pages 536-549

  Granata, Kevin P ^a,c,d   Bennett, Bradford C ^b,e,f  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b UNIVERSITY OF VIRGINIA   (United States)

^c State University   (United States)

^d Musculoskeletal Biomechanics Laboratory   (United States)

^e Motion Analysis and Motor Performance Laboratory   (United States)

^f UNIVERSITY OF VIRGINIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EQUILIBRIUM MECHANICS; PUSHING EXERTIONS; TRUNK STIFFNESS;

ERGONOMICS; HEALTH RISKS; MUSCLE; OCCUPATIONAL RISKS; STIFFNESS;

BIOMECHANICS;

ADULT; ARTICLE; BIOMECHANICS; BODY EQUILIBRIUM; BODY MOVEMENT; BODY POSTURE; EXERCISE; FEMALE; FOOT; FORCE; HUMAN; HUMAN EXPERIMENT; INJURY; JOINT STABILITY; MALE; MUSCLE ISOMETRIC CONTRACTION; NORMAL HUMAN; RIGIDITY; SPINE; TASK PERFORMANCE; BACK; CLINICAL TRIAL; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; MUSCLE CONTRACTION; PHYSIOLOGY; RANDOMIZED CONTROLLED TRIAL; SKELETAL MUSCLE;

ADULT; BACK; BIOMECHANICS; EXERCISE; FEMALE; HUMANS; MALE; MUSCLE CONTRACTION; MUSCLE, SKELETAL; MUSCULOSKELETAL EQUILIBRIUM; SPINE;

EID: 33644861363     PISSN: 00187208     EISSN: None     Source Type: Journal    
DOI: 10.1518/001872005774859962     Document Type: Article

References (72)

1. Andersson, G. B. J. (1981). Epidemiologic aspects on low back pain in industry. Spine 6, 53-60.
2. Ayoub, M. M. (1974). The effects of operator stance on pushing and pulling tasks. American Institute of Industrial Engineering Transactions, 6, 185-195.
3. Baril-Gingras, G., & Lortie, M. (1995). The handling of objects other than boxes: Univariate analysis of handling techniques in a large transport company. Ergonomics, 38, 905-925.
4. Bergmark, A. (1989). Stability of the lumbar spine: A study in mechanical engineering. Acta Orthopaedica Scandinavica Supplementum, 230, 1-54.
5. Chaffin, D. B. (1969). A computerized biomechanical model - Development of and use in studying gross body actions. Journal of Biomechanics, 2, 429-441.
6. Chaffin, D. B. (1987). Manual materials handling and the biomechanical basis for prevention of low-back pain in industry - An overview. American Industrial Hygiene Association Journal, 48, 989-996.
7. Chaffin, D. B., Andres, R. O., & Garg, A. U. (1983). Volitional postures during maximal push/pull exertions in the sagittal plane. Human Factors, 25, 541-550.
8. Chaffin, D. B., & Page G. B. (1994). Postural effects on biomechanical and psychophysical weight-lifting limits. Ergonomics, 37, 663-676.
9. Chaffin, D. B., & Park, K. S. (1973). A longitudinal study of low-back pain as associated with weight lifting factors. American Industrial Hygiene Association Journal, 34, 513-525.
10. Chaffin, D. B., Stump, B. S., Nussbaum, M. A., & Baker, G. (1999). Low-back stresses when learning to use a materials handling device. Ergonomics 42, 94-110.
11. Cholewicki, J., Juluru, K., Radebold, A., Panjabi, M. M., & McGill, S. M. (1999). Lumbar spine stability can be augmented with an abdominal belt and/or increased intra-abdominal pressure. European Spine Journal, 8, 388-395.
12. Cholewicki, J., & McGill, S. M. (1996). Mechanical stability on the in vivo lumbar spine: Implications for injury and chronic low back pain. Clinical Biomechanics, 11, 1-15.
13. Cholewicki, J., Panjabi, M., & Khachatryan, A. (1997). Stabilizing function of trunk flexor-extensor muscles around a neutral spine posture. Spine, 22, 2207-2212.
14. Cholewicki, J., Simons, A. P. D., & Radebold, A. (2000). Effects of external trunk loads on lumbar spine stability. Journal of Biomechanics, 33, 1377-1385.
15. Crisco, J. J., & Panjabi, M. M. (1992). Euler stability of the human ligamentous lumbar spine: Part I. Theory. Clinical Biomechanics, 7, 19-26.
16. Crisco, J. I., Panjabi, M. M., Yamamoto, I., & Oxland, T. R. (1992). Euler stability of the human ligamentous lumbar spine: Part II. Experiment. Clinical Biomechanics, 7, 27-32.
17. Damkot, D. K., Pope, M. H., Lord, J., & Frymoyer, J. W. (1984). The relationship between work history, work environment and low-back pain in men. Spine, 9, 395-399.
18. deLooze, M. P., Stassen, A. R. A., Markslag, A. M. T., Borst, M. J., Wooning, M. M., & Toussaint, H. M. (1995). Mechanical loading of the low back in three methods of refuse collecting. Ergonomics, 38, 1993-2006,
19. deLooze, M. P., van Greuningen, K., Rebel, J., Kingma, I., & Kuijer, P. P. (2000). Force direction and physical load in dynamic pushing and pulling. Ergonomics, 43, 377-390.
20. Erdmann, W. S. (1997). Geometric and inertial data of the trunk in adult males. Journal of Biomechanics, 30, 679-688.
21. Gardner-Morse, M. G., & Stokes, I. A. F. (1998). The effects of abdominal muscle coactivation on lumbar spine stability. Spine, 23, 86-92.
22. Gardner-Morse, M. G., & Stokes, I. A. F. (2001). Trunk stiffness increases with steady-state effort. Journal of Biomechanics, 34, 457-463.
23. Gardner-Morse, M. G., Stokes, I. A. F, & Laible, J. P. (1995). Role of muscles in lumbar stability in maximum extension efforts. Journal of Orthopaedic Research, 13, 802-808.
24. Gottlieb, G. L., & Agarwal, G. C. (1978). Dependence of human ankle compliance on joint angle. Journal of Biomechanics, 11, 177-181.
25. Granata, K. P., & Marras, W. S. (1995a). An EMG assisted model of biomechanical trunk loading during free-dynamic lifting. Journal of Biomechanics, 28, 1309-1317.
26. Granata, K. P., & Marras, W. S. (1995b). The influence of trunk muscle coactivity upon dynamic spinal loads. Spine, 20, 913-919.
27. Granata, K. P., & Marras, W. S. (1996). Biomechanical models in ergonomics. In A. Bhattacharya & J. D. McGlothlin (Eds.), Handbook of occupational ergonomics, theory and applications (pp. 115-136). New York: Dekker.
28. Granata, K. P., Marras, W. S., & Fathallah, F. A. (1995). A method for measuring external trunk loads during dynamic lifting exertions. Journal of Biomechanics, 29, 1219-1222.
29. Granata, K. P., & Orishimo, K. (2001). Response of trunk muscle coactivation to changes in spinal stability. Journal of Biomechanics, 34, 1117-1123.
30. Granata, K. P., Slota, G. P., Bennett, B. E., & Kang, H. G. (2004). Paraspinal muscle reflex dynamics. Journal of Biomechanics, 37, 241-247.
31. Granata, K. P., & Wilson, S. E. (2001). Trunk posture and spinal stability. Journal of Biomechanics, 16, 650-659.
32. Granata, K. P., Wilson, S. E., & Padua, D. A. (2002). Gender differences in active musculoskeletal Stiffness: I. Quantification in controlled measurement of knee joint dynamics. Journal of Electromyology and Kinesiology, 12, 119-126.
33. Hamill, J., & Knutzen, K. (1995). Biomechanical basis of human movement. Baltimore: Williams and Wilkins.
34. Hoozemans, M. J., van der Beek, A. J., Frings-Dresen, M. H., van Dijk, F. J., & van der Woude, L. H. (1998). Pushing and pulling in relation to musculoskeletal disorders: A review of risk factors. Ergonomics, 41, 757-781.
35. Hughes, R. E., Bean, J. C., & Chaffin, D. B. (1995). Evaluating the effect of co-contraction in optimization models. Journal of Biomechanics, 28, 875-878.
36. Hunter, I. W., & Kearney, R. E. (1982). Dynamics of human ankle stiffness: Variation with mean ankle torque. Journal of Biomechanics, 15, 747-752.
37. Karwowski, W., Caldwell, M., & Gaddie, P. (1994). Relation between the NIOSH (1991) lifting index, compressive and shear forces on the lumbosacral joint, and low back injury incidence rate based on industrial field study. In Proceedings of the Human Factors and Ergonomics Society 38th Annual Meeting (pp. 654-657). Santa Monica, CA: Human Factors and Ergonomics Society.
38. Kearney, R. E., & Hunter, I. W. (1990). System identification of human joint dynamics. Critical Reviews In Biomedical Engineering, 18, 55-87.
39. Kearney, R. E., & Stein, R. B. (1997). Identification of intrinsic and reflex contributions to human ankle stiffness dynamics. IEEE Transactions on Biomedical Engineering, 44, 493-504.
40. Kettler, A., Hartwig, E., Schultheis, M., Claes, L., & Wilke, H. J. (2002). Mechanically simulated muscle forces strongly stabilize intact and injured upper cervical spine specimens. Journal of Biomechanics, 35, 339-346.
41. Kumar, S. (1994). The back compressive forces during maximal push-pull activities in the sagittal plane. Journal of Human Ergology, 23, 133-150.
42. Kumar, S. (1995). Upper body push-pull strength of normal young adults in sagittal plane at three heights. International Journal of Industrial Ergonomics, 15, 427-436.
43. Kumar, S. (1996). Spinal compression at peak isometric and isokinetic exertions in simulated lifting in symmetric and asymmetric planes. Clinical Biomechanics, 11, 281-289.
44. Lavender, S. A., Conrad, K. M., Reichelt, P. A., Johnson, P. W., & Meyer, F. T. (2000). Biomechanical analyses of paramedics simulating frequently performed strenuous work tasks. Applied Ergonomics, 31, 167-177,
45. Lavender, S. A., Mirka, G. A., Schoenmarklin, R. W., Sommerich, C. M., Sudhakar, L. R., & Marras, W. S. (1989). The effects of preview and task symmetry on trunk muscle response to sudden loading. Human Factors, 31, 101-115.
46. Lee, K. S., Chaffin, D. B., Herrin, G. A., & Waikar, A. M. (1991). Effect of handle height on lower-back loading in cart pushing and pulling. Applied Ergonomics, 22, 117-123.
47. Lee, K. S., Chaffin, D. B., Waikar, A. M., & Chung, M. K. (1989). Lower back muscle forces in pushing and pulling. Ergonomics, 32, 1552-1563.
48. Marras, W. S., & Granata, K, P. (1997). The development of an EMG-assisted model to assess spine loading during whole-body free-dynamic lifting. Journal of Electromyology and Kinesiology, 7, 259-268,
49. Marras, W. S., Lavender, S. A., Leurgans, S., Fathallah, F. A., Allread, W. G., Ferguson, S. A., et al. (1995). Biomechanical risk factors for occupationally related low back disorder risk. Ergonomics, 38, 377-410.
50. Marras, W. S., Lavender, S. A., Leurgans, S. E., Rajulu, S. L., Allread, W. G., Fathallah, F. A., et al. (1993). The role of dynamic three-dimensional trunk motion in occupationally-related low back disorders: The effects of workplace factors, trunk position, and trunk motion characteristics on risk of injury. Spine, 18, 617-628.
51. McGill, S. M., & Norman, R. W. (1986). Partitioning the L4-L5 dynamic moment into disc, ligamentous, and muscular components during lifting. Spine, 11, 666-678.
52. Meakin, J. R., Hukins, D. W., & Aspden, R. M. (1996). Euler buckling as a model for the curvature and flexion of the human lumbar spine. Proceedings of the Royal Society of London, Series B: Biological Sciences, 263, 1383-1387.
53. Morgan, D. L. (1977). Separation of active and passive components of short-range stiffness of muscle. American Journal of Physiology, 232, c45-c49.
54. National Institute for Occupational Safety and Health. (1981). A work practices guide for manual lifting (Rep. No. 81-122). Cincinnati, OH: U.S. Department of Health and Human Services/Author.
55. Nichols, T. R., & Houk, J. C. (1976). Improvement of linearity and regulation of stiffness that results from the actions of the stretch reflex. Journal of Neurophysiology, 39, 119-142.
56. Norman, R. W., Wells, R., Neumann, P., Frank, J., Shannon, H., Kerr M., et al. (1998). A comparison of peak vs. cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. Clinical Biomechanics, 13, 561-573.
57. Nussbaum, M. A., Chaffin, D. B., & Baker, G. (1999). Biomechanical analysis of materials handling manipulators in short distance transfers of moderate mass objects: Joint strength, spine forces and muscular antagonism. Ergonomics, 42, 1597-1618.
58. Parnianpour, M., Campello, M., & Sheikhzadeh, A. (1991). The effect of posture on triaxial trunk strength in different directions: Its biomechanical consideration with respect to incidence of low-back problems in construction industry. International Journal of Industrial Ergonomics, 8, 279-287.
59. Radebold, A., Cholewicki, J., Panjabi, M., & Patel, T. C. (2000). Muscle response pattern to sudden trunk loading in healthy individuals and in patients with chronic low back pain. Spine, 25, 947-954.
60. Radebold, A., Cholewicki, J., Polzhofer, G. A., & Green, T. P. (2001). Impaired postural control of the lumbar spine is associated with delayed muscle response times in patients with chronic idiopathic low back pain. Spine, 26, 724-730.
61. Resnick, M. L., & Chaffin, D. B. (1995). An ergonomic evaluation of handle height and load in maximal and submaximal cart pushing. Applied Ergonomics, 26, 173-178.
62. Schibye, B., Sogaard, K., Martinsen, D., & Klausen, K. (2001). Mechanical load on the low back and shoulders during pushing and pulling of two-wheeled waste containers compared with lifting and carrying of bags and bins. Clinical Biomechanics, 16, 549-559.
63. Schultz, A. B., & Anderson, G. B. J. (1981). Analysis of loads on the lumbar spine. Spine, 6, 76-82.
64. Stokes, I. A., Gardner-Morse, M., Churchill, D., & Laible, J. P. (2002). Measurement of spinal motion segment stiffness matrix. Journal of Biomechanics, 32, 517-521.
65. Tai, C., & Tobinson, C. J. (1999). Knee elasticity influenced by joint angle and perturbation intensity. IEEE Transactions on Rehabilitation Engineering, 7, 111-115.
66. van der Beek, A. J., Hoozemans, M. J. M., Frings-Dresen, M. H., & Burdorf, A. (1999). Assessment of exposure to pushing and pulling in epidemiological field studies: An overview of methods, exposure measures, and measurement strategies. International Journal of Industrial Ergonomics, 24, 417-429.
67. van der Beek, A. J., Kluver, B. D., Frings-Dresen, M. H., & Hoozemans, M. J. (2000). Gender differences in exerted forces and physiological load during pushing and pulling of wheeled cages by postal workers. Ergonomics, 43, 269-281.
68. Weiss, P. I., Hunter, I. W., & Kearney, R. E. (1988). Human ankle joint stiffness over the full range of muscle activation levels. Journal of Biomechanics, 21, 539-544.
69. Wilson, G. J., Wood, G. A., & Elliott, B. C. (1991). Optimal stiffness of series elastic component in a stretch-shorten cycle activity. Journal of Applied Physiology, 70, 825-833.
70. Winter, D. A. (1990). Biomechanics and motor control of human movement. New York: Wiley-Interscience.
71. Woldstad, J. C., & Chaffin, D. B. (1994). Dynamic push and pull forces while using a manual material handling assist device. IIE Transactions, 26, 77-88.
72. Zhang, L. Q., Nuber, G., Butler, J., Bowen, M., & Rymer, W. Z. (1998). In vivo human knee joint dynamic properties as functions of muscle contraction and joint position. Journal of Biomechanics, 31, 71-76.