Drying rate curves of porous solids in steam and in air under low-pressure conditions

Drying Technology

Volumn 24, Issue 1, 2006, Pages 37-43

  Shibata, Hiromichi ^a  

^a FUKUOKA UNIVERSITY   (Japan)

Author keywords

Critical moisture content; Falling rate period; Low pressures; Model; Subatmospheric pressure

Indexed keywords

ATMOSPHERIC PRESSURE; GLASS; HEAT TRANSFER; MOISTURE; POROUS MATERIALS; PRESSURE EFFECTS; STEAM;

CRITICAL MOISTURE CONTENT; FALLING RATE PERIOD; LOW PRESSURES; SINTERED GLASS BEADS; SUBATMOSPHERIC PRESSURE; SUPERHEATED STEAM;

DRYING;

ATMOSPHERIC PRESSURE; DRYING; GLASS; HEAT TRANSFER; MOISTURE; POROUS MATERIALS; PRESSURE EFFECTS; STEAM;

EID: 33644814202     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930500538642     Document Type: Article

References (26)

1. Elustondo, D.M.; Mujumdar, A.S.; Urbicain, M.J.Optimum operating conditions in drying foodstuffs with superheated steam. Drying Technology 2002, 20, 381-402.[CSA]
2. Pang, S.; Dakin, M.Drying rate and temperature profile for superheated steam vacuum drying and moist air drying of softwood lumber. Drying Technology 1999, 17, 1135-1147 [CSA]
3. Elustondo, D.; Oliveira, L.; Avramidis, S.Evaluation of three semi-empirical models for superheated steam vacuum drying of timbers. Drying Technology 2003, 21, 875-893.[CSA][CROSSREF]
4. Pang, S.; Pearson, H.Experimental investigation and practical application of superheated steam drying technology for softwood timber. Drying Technology 2004, 22, 2079-2094.[CSA][CROSSREF]
5. Defo, M.; Fortin, Y.; Cloutier, A.Modeling superheated steam vacuum drying of wood. Drying Technology 2004, 22, 2231-2253.[CSA][CROSSREF]
6. Devahastin, S.; Suvarnakuta, P.; Soponronnarit, S.; Mujumdar, A.S.A comparative study of low-pressure superheated steam and vacuum drying of a heat-sensitive material. Drying Technology 2004, 22, 1845-1867.[CSA][CROSSREF]
7. Suvarnakuta, P.; Devahastin, S.; Soponronnarit, S.; Mujumdar, A.S.Drying kinetics and inversion temperature in a low-pressure superheated steam-drying system. Ind. Eng. Chem. Res. 2005, 44, 1934-1941.[CSA][CROSSREF]
8. Yoshida, T.; Hyodo, T.Evaporation of water in air, humid air, and superheated steam. Ind. Eng. Chem. Process Des. Develop. 1970, 9, 207-214.[CSA][CROSSREF]
9. Chow, L.C.; Chung, J.N.Evaporation of water into a laminar stream of air and superheated steam. Int. J. Heat Mass Transfer 1983, 26, 373-380.[CSA][CROSSREF]
10. Haji, M.; Chow, L.C.Experimental measurement of water evaporation rates into air and superheated steam. J. Heat Transfer 1988, 110, 237-242.[CSA]
11. Wu, C.-H.; Davis, D.C.; Chung, J.N.Simulated dehydration of wedge-shaped specimens in turbulent flow of superheated steam and air. Drying Technology 1989, 7, 761-782.[CSA]
12. Schwartze, J.P.; Bröcker, S.The evaporation of water into air of different humidities and the inversion temperature phenomenon. Int. J. Heat Mass Transfer 2000, 43, 1791-1800.[CSA][CROSSREF]
13. Costa, V.A.F.; Neto da Silva, F.On the rate of evaporation of water into a stream of dry air, humidified air and superheated steam, and the inversion temperature. Int. J. Heat Mass Transfer 2003, 46, 3713-3726.[CSA]
14. Debbissi, C.; Orfi, J.; Ben Nasrallah, S.Evaporation of water by free or mixed convection into humid air and superheated steam. Int. J. Heat Mass Transfer 2003, 46, 4703-4715.[CSA][CROSSREF]
15. Bond, J.F.; Mujumdar, A.S.; van Heiningen, A.R.P.; Douglas, W.J.M.Drying paper by impinging jets of superheated steam. Part 1: Constant drying rate in superheated steam. Can. J. Chem. Eng. 1994, 72, 446-451.[CSA]
16. Bond, J.F.; Crotogino, R.H.; van Heiningen, A.R.P.; Douglas, W.J.M.An experimental study of the falling rate period of superheated steam impingement drying of paper. Drying Technology 1992, 10, 961-977.[CSA]
17. Perre, P.; Moser, M.; Martin, M.Advances in transport phenomena during convective drying with superheated steam and moist air. Int. J. Heat Mass Transfer 1993, 36, 2725-2746.[CSA][CROSSREF]
18. Basilico, C.; Genevaux, J.M.; Martin, M.High temperature drying of wood semi-industrial kiln experiments. Drying Technology 1990, 8, 751-765.[CSA]
19. Johansson, A.; Fyhr, C.; Rasmuson, A.High temperature convective drying of wood chips with air and superheated steam. Int. J. Heat Mass Transfer 1997, 40, 2843-2858.[CSA][CROSSREF]
20. Johansson, A.; Rasmuson, A.The influence of the drying medium on high temperature convective drying of single wood chips. Drying Technology 1997, 15, 1801-1813.[CSA]
21. Pronyk, C.; Cenkowski, S.; Muir, W.E.Drying foodstuffs with superheated steam. Drying Technology 2004, 22, 899-916.[CSA][CROSSREF]
22. Shibata, H.Comparison of drying rate curves of porous solids in superheated steam to those in air. Drying Technology 2005, 23, 1419-1434.[CSA][CROSSREF]
23. Shibata, H.; Ide, M.Superheated steam drying of sintered spheres of glass beads under vacuum. Drying Technology 1991, 9, 657-675.[CSA]
24. Shibata, H.; Iwao, Y.Vacuum drying of sintered spheres of glass beads. Ind. Eng. Chem. Res. 1999, 38, 3535-3542.[CSA][CROSSREF]
25. Shibata, H.The differences in drying rate curves of sintered glass beads at subatmospheric and atmospheric pressures and at lower pressures in steam. Dev. Chem. Eng. Mineral Process 2002, 10, 367-379.[CSA]
26. Shibata, H.; Mada, J.; Funatsu, K.Prediction of drying rate curves on sintered spheres of glass beads in superheated steam under vacuum. Ind. Eng. Chem. Res. 1990, 29, 614-617.[CSA][CROSSREF]