-
1
-
-
85039361942
-
-
Chapter "Materials Science", Santa Rosa (CA) Harry F Albers (publisher)
-
ADEPT Institute (1996) Tooth Colored Restoratives Edition 8, Chapter "Materials Science" 5a-8, Santa Rosa (CA) Harry F Albers (publisher).
-
(1996)
Tooth Colored Restoratives Edition 8
-
-
-
2
-
-
84985801100
-
Factors affecting the quantity of remaining double bonds in restorative resin polymers
-
Asmussen E (1982a) Factors affecting the quantity of remaining double bonds in restorative resin polymers Scandinavian Journal of Dental Research 90 490-496.
-
(1982)
Scandinavian Journal of Dental Research
, vol.90
, pp. 490-496
-
-
Asmussen, E.1
-
3
-
-
84985819525
-
Restorative resins: Hardness and strength vs quantity of remaining double bonds
-
Asmussen E (1982b) Restorative resins: Hardness and strength vs quantity of remaining double bonds Scandinavian Journal of Dental Research 90 484-489.
-
(1982)
Scandinavian Journal of Dental Research
, vol.90
, pp. 484-489
-
-
Asmussen, E.1
-
4
-
-
0037607394
-
Light-emitting diode curing: Influence on selected properties of resin composites
-
Asmussen E & Peutzfeldt A (2003) Light-emitting diode curing: Influence on selected properties of resin composites Quintessence International 34 71-75.
-
(2003)
Quintessence International
, vol.34
, pp. 71-75
-
-
Asmussen, E.1
Peutzfeldt, A.2
-
7
-
-
12744277941
-
Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins
-
Bouillaguet S, Caillot G, Forchelet J, Catanani-Lorente M, Wataha JC & Krejci I (2005) Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins Journal of Biomedical Materials Research 72 260-267.
-
(2005)
Journal of Biomedical Materials Research
, vol.72
, pp. 260-267
-
-
Bouillaguet, S.1
Caillot, G.2
Forchelet, J.3
Catanani-Lorente, M.4
Wataha, J.C.5
Krejci, I.6
-
8
-
-
85039358856
-
Hardness profiles of composite resin cured with QTH and LEDs curing units
-
Abstract #3041
-
Bouillaguet S, Krejci I, Leresche L, Forchelet M, Catani-Lorente M & Meyer JM (2003) Hardness profiles of composite resin cured with QTH and LEDs curing units Journal of Dental Research 82 (Special Issue) Abstract #3041 p 390.
-
(2003)
Journal of Dental Research
, vol.82
, Issue.SPEC. ISSUE
, pp. 390
-
-
Bouillaguet, S.1
Krejci, I.2
Leresche, L.3
Forchelet, M.4
Catani-Lorente, M.5
Meyer, J.M.6
-
11
-
-
0024632298
-
Curing light-activated composite cement through porcelain
-
Chan KC & Boyer DB (1989) Curing light-activated composite cement through porcelain Journal of Dental Research 68 476-480.
-
(1989)
Journal of Dental Research
, vol.68
, pp. 476-480
-
-
Chan, K.C.1
Boyer, D.B.2
-
12
-
-
0034149697
-
Influence of composite inlay/onlay thickness on hardening of dual-cured resin cements
-
el-Mowafy OM & Rubo MH (2000) Influence of composite inlay/onlay thickness on hardening of dual-cured resin cements Journal of the Canadian Dental Association 66 147-151.
-
(2000)
Journal of the Canadian Dental Association
, vol.66
, pp. 147-151
-
-
Mowafy, O.M.1
Rubo, M.H.2
-
13
-
-
85039353603
-
The influence of resin composite type on depth of cure with LED and QTH light-curing devices
-
abstract #1500
-
Ernst CP, Meyer GR, Volmerhaus J, Ahlers MO & Willershausen B (2003) The influence of resin composite type on depth of cure with LED and QTH light-curing devices Journal of Dental Research 82 (Special Issue) abstract #1500 p 309.
-
(2003)
Journal of Dental Research
, vol.82
, Issue.SPEC. ISSUE
, pp. 309
-
-
Ernst, C.P.1
Meyer, G.R.2
Volmerhaus, J.3
Ahlers, M.O.4
Willershausen, B.5
-
14
-
-
0346404744
-
Effect of varying curing systems on composite resin shrinkage
-
Abstract #2323
-
Hadechney M, Dennison JB, Yaman P, Jamilton J & Feigal R (1999) Effect of varying curing systems on composite resin shrinkage Journal of Dental Research 78 (Special Issue) Abstract #2323 p 396.
-
(1999)
Journal of Dental Research
, vol.78
, Issue.SPEC. ISSUE
, pp. 396
-
-
Hadechney, M.1
Dennison, J.B.2
Yaman, P.3
Jamilton, J.4
Feigal, R.5
-
15
-
-
0030096774
-
Light-activated restorative materials: A method of determining effective radiation times
-
Harrington E, Wilson HJ & Shortall AC (1996) Light-activated restorative materials: A method of determining effective radiation times Journal of Oral Rehabilitation 23 210-218.
-
(1996)
Journal of Oral Rehabilitation
, vol.23
, pp. 210-218
-
-
Harrington, E.1
Wilson, H.J.2
Shortall, A.C.3
-
16
-
-
0033228259
-
Human pulp response after an adhesive system application in deep cavities
-
Hebling J, Giro EM & Costa CA (1999) Human pulp response after an adhesive system application in deep cavities Journal of Dentistry 27 557-564.
-
(1999)
Journal of Dentistry
, vol.27
, pp. 557-564
-
-
Hebling, J.1
Giro, E.M.2
Costa, C.A.3
-
17
-
-
0034281023
-
Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus and hardness of photo-activated resin composites
-
Hofmann N, Hugo B, Schubert K & Klaiber B (2000) Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus and hardness of photo-activated resin composites Clinical Oral Investigations 4 140-147.
-
(2000)
Clinical Oral Investigations
, vol.4
, pp. 140-147
-
-
Hofmann, N.1
Hugo, B.2
Schubert, K.3
Klaiber, B.4
-
18
-
-
0036886529
-
Effect of irradiation type (LED or QTH) on photo-activated composite shrinkage stain kinetics, temperature rise, and hardness
-
Hofmann N, Hugo B & Klaiber B (2002) Effect of irradiation type (LED or QTH) on photo-activated composite shrinkage stain kinetics, temperature rise, and hardness European Journal of Oral Sciences 110 471-479.
-
(2002)
European Journal of Oral Sciences
, vol.110
, pp. 471-479
-
-
Hofmann, N.1
Hugo, B.2
Klaiber, B.3
-
21
-
-
0035460082
-
Curing efficiency of different polymerization methods through ceramic restorations
-
Jung H, Friedl KH, Hiller KA, Haller A & Schmalz G (2001) Curing efficiency of different polymerization methods through ceramic restorations Clinical Oral Investigations 5 156-161.
-
(2001)
Clinical Oral Investigations
, vol.5
, pp. 156-161
-
-
Jung, H.1
Friedl, K.H.2
Hiller, K.A.3
Haller, A.4
Schmalz, G.5
-
22
-
-
84986776901
-
Cure profiles of light-cured dental composites by Raman spectroscopy
-
Louden JD & Roberts TA (1983) Cure profiles of light-cured dental composites by Raman spectroscopy Journal of Raman Spectroscopy 14 365-366.
-
(1983)
Journal of Raman Spectroscopy
, vol.14
, pp. 365-366
-
-
Louden, J.D.1
Roberts, T.A.2
-
23
-
-
1542352909
-
Polymerization of high-intensity curing lights through porcelain
-
Abstract #981
-
McLean ME & Fassbinder DJ (1999) Polymerization of high-intensity curing lights through porcelain Journal of Dental Research 78 (Special Issue) Abstract #981 p 228.
-
(1999)
Journal of Dental Research
, vol.78
, Issue.SPEC. ISSUE
, pp. 228
-
-
McLean, M.E.1
Fassbinder, D.J.2
-
24
-
-
0036013938
-
High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties
-
Mills RW, Uhl A, Blackwell GB & Jandt KD (2002) High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties Biomaterials 23 2955-2963.
-
(2002)
Biomaterials
, vol.23
, pp. 2955-2963
-
-
Mills, R.W.1
Uhl, A.2
Blackwell, G.B.3
Jandt, K.D.4
-
25
-
-
0034244104
-
Elution of TEG-DMA and Bis-GMA from a resin and a resin composite cured with halogen or plasma light
-
Munksgaard EC, Peutzfeldt A & Asmussen E (2000) Elution of TEG-DMA and Bis-GMA from a resin and a resin composite cured with halogen or plasma light European Journal of Oral Sciences 108 341-345.
-
(2000)
European Journal of Oral Sciences
, vol.108
, pp. 341-345
-
-
Munksgaard, E.C.1
Peutzfeldt, A.2
Asmussen, E.3
-
26
-
-
0028385147
-
Candela-class high brightness InGaN/AlGaN double heterostructure blue-light emitting diodes
-
Nakamura S, Mukai T & Seno M (1994) Candela-class high brightness InGaN/AlGaN double heterostructure blue-light emitting diodes Applied Physics Letters 64 1687-1689.
-
(1994)
Applied Physics Letters
, vol.64
, pp. 1687-1689
-
-
Nakamura, S.1
Mukai, T.2
Seno, M.3
-
27
-
-
0034278146
-
Characterization of resin composites polymerized with plasma arc curing units
-
Peutzfeldt A, Sahafi A & Asmussen E (2000) Characterization of resin composites polymerized with plasma arc curing units Dental Materials 16 330-336.
-
(2000)
Dental Materials
, vol.16
, pp. 330-336
-
-
Peutzfeldt, A.1
Sahafi, A.2
Asmussen, E.3
-
28
-
-
0028317218
-
Effect of light intensity and exposure duration on cure of resin composite
-
Rueggeberg FA, Caughman WF & Curtis JW Jr (1994) Effect of light intensity and exposure duration on cure of resin composite Operative Dentistry 19(1) 26-32.
-
(1994)
Operative Dentistry
, vol.19
, Issue.1
, pp. 26-32
-
-
Rueggeberg, F.A.1
Caughman, W.F.2
Curtis Jr., J.W.3
-
30
-
-
4644316947
-
Keramik-inlays und veneers wissenschaftliche stellungnahme der DGZMK
-
Schmalz G & Geursten W (2001) [Keramik-Inlays und Veneers Wissenschaftliche Stellungnahme der DGZMK] Deutsche Zahnärztliche Zeitschrift 56 347-348.
-
(2001)
Deutsche Zahnärztliche Zeitschrift
, vol.56
, pp. 347-348
-
-
Schmalz, G.1
Geursten, W.2
-
32
-
-
0036512465
-
Halogen versus high-intensity light-curing of uncoated and pre-coated brackets: A shear bond strength study
-
Sfondrini MF, Cacciafesta V & Klersy C (2002) Halogen versus high-intensity light-curing of uncoated and pre-coated brackets: A shear bond strength study Journal of Orthodontics 29 45-50.
-
(2002)
Journal of Orthodontics
, vol.29
, pp. 45-50
-
-
Sfondrini, M.F.1
Cacciafesta, V.2
Klersy, C.3
-
33
-
-
0141782371
-
Effectiveness of composite cure associated with different curing modes of LED lights
-
Soh MS, Yap AUJ & Siow KS (2003) Effectiveness of composite cure associated with different curing modes of LED lights Operative Dentistry 28(4) 371-377.
-
(2003)
Operative Dentistry
, vol.28
, Issue.4
, pp. 371-377
-
-
Soh, M.S.1
Yap, A.U.J.2
Siow, K.S.3
-
34
-
-
0036617192
-
Responses of L929 mouse fibroblasts, primary and immortalized bovine dental papilla-derived cell lines to dental resin components
-
Thonemann B, Schmalz G, Killer KA & Schweikl H (2002) Responses of L929 mouse fibroblasts, primary and immortalized bovine dental papilla-derived cell lines to dental resin components Dental Materials 18 318-323.
-
(2002)
Dental Materials
, vol.18
, pp. 318-323
-
-
Thonemann, B.1
Schmalz, G.2
Killer, K.A.3
Schweikl, H.4
-
35
-
-
0347264756
-
Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units
-
Uhl A, Mills RW & Jandt KD (2003a) Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units Biomaterials 24 1787-1795.
-
(2003)
Biomaterials
, vol.24
, pp. 1787-1795
-
-
Uhl, A.1
Mills, R.W.2
Jandt, K.D.3
-
36
-
-
0346037070
-
Polymerization and light-induced heat of dental composites cured with LED and halogen technology
-
Uhl A, Mills RW & Jandt KD (2003b) Polymerization and light-induced heat of dental composites cured with LED and halogen technology Biomaterials 24 1809-1820.
-
(2003)
Biomaterials
, vol.24
, pp. 1809-1820
-
-
Uhl, A.1
Mills, R.W.2
Jandt, K.D.3
-
37
-
-
84989591443
-
Marginal adaptation of restorative resin polymerized at reduced rate
-
Uno S & Asmussen E (1991) Marginal adaptation of restorative resin polymerized at reduced rate Scandinavian Journal of Dental Research 99 440-444.
-
(1991)
Scandinavian Journal of Dental Research
, vol.99
, pp. 440-444
-
-
Uno, S.1
Asmussen, E.2
-
38
-
-
0141782380
-
Composite cure and shrinkage associated with high intensity curing light
-
Yap AUJ, Wong NY & Siow KS (2003) Composite cure and shrinkage associated with high intensity curing light Operative Dentistry 28(4) 357-364.
-
(2003)
Operative Dentistry
, vol.28
, Issue.4
, pp. 357-364
-
-
Yap, A.U.J.1
Wong, N.Y.2
Siow, K.S.3
|