Alloy design, processing and properties of TRIP steels: A critical comparison

International Conference on Advanced High Strength Sheet Steels for Automotive Applications - Proceedings

Volumn , Issue , 2004, Pages 79-98

  Traint, S ^a   Pichler, A ^a   Blaimschein, M ^a   Rothler B ^a   Krempaszky, C ^c   Werner, E ^b  

^a VOESTALPINE STAHL GMBH   (Austria)

^b INSTITUTE FOR MICROELECTRONICS   (Austria)

^c TECHNICAL UNIVERSITY OF MUNICH   (Germany)

Author keywords

Alloy design (Si, Al, P, Cu); Continuous annealing; Hot dip galvanizing; Mechanical properties; Transformation during processing; TRIP steel grades

Indexed keywords

ALLOYING; ANNEALING; AUTOMOTIVE INDUSTRY;

ALLOY DESIGN (SI, AL, P, CU); CONTINUOUS ANNEALING; TRANSFORMATION DURING PROCESSING; TRIP STEEL GRADES;

STEEL;

EID: 33644701412     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (51)

1. M. Ashby, "Materials Selection in Mechanical Design", Pergamon Press, Oxford, 1992.
2. P. Stiaszny, A. Pichler, E. Tragl, M. Kaiser, W. Schwarz, M. Pimminger, K. Kösters, and K. Spiradek, "Influence of Annealing Technology on the Material Properties of LC and ULC Steel Grades", International Symposium: Modem LC and ULC Sheet Steels for Cold Forming, Department of Ferrous Metallurgy RWTH Aachen University of Technology, 1998, pp. 225.
3. N. Ohashi, T. Irie, S. Satoh, O. Hashimoto, and I. Takahashi, "Development of Cold-Rolled High Strength Steel Sheet with Excellent Deep Drawability", SAE Technical Paper Series (810027), Warrendale, 1981.
4. A. Pichler, M. Mayr, G. Hribemig, H. Presslinger, and P. Stiaszny, "High Strength IF Steels: Production, Parameters and Properties", International Forum for Physical Metallurgy of IF Steels IF.IFS-94, The Iron and Steel Institute of Japan, 1994, pp. 249.
5. L. Meyer, W. Bleck, and W. Muschenborn, 'Product-Oriented IF Steel Design', International Forum for Physical Metallurgy of IF Steels IF.IFS-94, The Iron and Steel Institute of Japan, 1994, pp. 203.
6. M. Blaimschein, K. M. Radlmayr, A. Pichler, E. Till, and P. Stiaszny, "Bake Hardening Effects in Components", Advanced Sheet Metal Forming, Proceedings of the 19th Biennial IDDRG Congress, The University of Miskolce, Miskolce, 1996, pp. 445.
7. T. Davenport, "Formable HSLA and Dual Phase Steels", The Metallurgical Society of AIME, Warrendale, 1979.
8. R. A. Kot and J. W. Morris, "Structure and Properties of Dual Phase Steels", The Metallurgical Society of AIME, Warrendale, 1979.
9. O. Matsumura, Y. Sakuma and H. Takechi, "TRIP and its Kinetic Aspects in Austempered 0.4C-1.5Si-0.8Mn Steel", Scripta Met. 21 (1987) pp. 1301.
10. O. Matsumura, Y. Sakuma, and H. Takechi, "Enhancement of Elongation by Retained Austenite in Intercritical Annealed 0.4C-1.5Si-0.8Mn Steel", Transaction ISIJ 27 (1987) pp. 570.
11. V. F. Zackay, E. R. Parker, D. Fahr, and R. Busch, "The Enhancement of Ductility in High-Strength Steels", ASM Trans. Quart. 60 (1967) pp. 252.
12. S. Traint, "Phase transformations and mechanical properties of low alloyed dual-phase and TRIP-steels", PhD-thesis, Fortschritt-Berichte VDI, Reihe 5, Munich 2002.
13. P. Stiaszny, E. Tragl, A. Pichler, R. Angerer, M. Hackl and W. Hackl, "Development and application of a modern and effective annealing simulations equipment for process- and material development", Proceedings THERMEC 2000, Las Vegas, Dec. 4-8, 2000.
14. F.S. LePera, "Improved etching technique to emphasize martensite and bainite in high strength dual-phase steel", Journal of Metals (1980) p. 38-39.
15. H. Weberberger, "Magnetische Messungen an Proben beliebiger Form mit dem Fluxmeter", Elektronik und Maschinenbau (E und M), 87 2 (1970) p. 103-110.
16. E. Wirthl, A. Pichler, R. Angerer, P. Stiaszny, K. Hauzenberger, Y. Titovets and M. Hackl, "Determination of the volume amount of retained austenite in small specimens by magnetic measurements", Proceedings International Conference on TRIP-aided high strength ferrous alloys, Ghent, Belgium, June 19-21 (2003) p.61-64.
17. rd Mechanical Working and Steel Processing Conference, Vol. XXXIX, Charlotte, NC, Oct. 29-31, 2001, Iron & Steel Society, Warrendale, PA, USA (2001) p. 449-467.
18. rd Mechanical Working and Steel Processing Conference, Vol. XXXIX, Charlotte, NC, Oct. 29-31, 2001, Iron & Steel Society, Warrendale, PA, USA (2001) p. 411-434.
19. th Mechanical Working and Steel Processing Conference, Vol. XL, Orlando, Florida, Sept. 8-11, 2002, Iron & Steel Society, Warrendale, PA, USA (2002) p. 139-152.
20. H.K.D.H. Bhadeshia, "Bainite in steels", The Institute of Materials, Cambridge University Press (1992).
21. O. Matsumura, Y. Sakuma, and H. Takechi, "Retained Austenite in 0. 4C - Si - 1.2 Mn Steel Sheet Intercritically Heated and Austempered", ISIJ International 32 (1992) pp. 1014.
22. Y. Sakuma, O. Matsumura, and H. Takechi, "Mechanical Properties and Retained Austenite in Intercritically Heat-treated Bainite-Transformed Steel and their Variation with Si and Mn Additions", Met. Trans. 22A (1991) pp. 489.
23. Y. Sakuma, O. Matsumura, and O. AJdsue, "Influence of C content and annealing temperature on microstructure and mechanical properties of 400°C transformed steel containing retained austenite, ISIJ International 31 (1991) p. 1348-1353.
24. K. Sugimoto, N. Ususi, M. Kobayashi, and S. Hashimoto, "Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels", ISIJ International 32 (1992) pp. 1311.
25. K. Sugimoto, M. Kobayashi, and S. Hashimoto, "Ductility and Strain-Induced Transformation in a High-Strength Transformation-Induced Plasticity-Aided Dual-Phase Steel", Met. Trans. 23A (1992) pp. 3085.
26. K. Sugimoto, M. Misu, M. Kobayashi, and H. Shirasawa, "Effects of Second Phase Morphology on Retained Austenite Morphology and Tensile Properties in a TRIP-aided Dual-Phase Steel Sheet, ISIJ International 33 (1993) pp. 775.
27. W. C. Jeong, D. K. Matlock, and G. Krauss, "Observation of Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-1.5Mn Steel with Ferrite-Bainite-Austenite Structure, Mat. Sci. & Eng. A165 (1993) pp. 1.
28. W. C. Jeong, D. K. Matlock, and G. Krauss, "Effects of Tensile-Testing Temperature on Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-l.5Mn Steel with Ferrite-Bainite-Austenite Structure, Mat. Science & Eng. A165 (1993) pp. 9.
29. Itami, M. Takahashi, and K. Ushioda, "Plastic Stability of Retained Austenite in the Cold -Rolled 0.14 % C- 1.9 % Si - 1.7 % Mn Sheet Steel", ISIJ International 35 (1995) pp. 1121.
30. Thyssen Stahl AG, DE Patent 196 10 675 Cl, "Mehrphasenstahl und Verfahren zu seiner Herstellung" March 19, 1996.
31. st Mechanical Working and Steel Processing Conference Proceedings, Baltimore, Oct. 24-27. 1999, ISS, Warrendale (1999) p. 265-276.
32. N. Fonstein, N. Pottore, S.H. Lalam, D. Bhattacharya, "Phase transformation behavior during continuous cooling and isothermal holding of aluminium and silicon bearing TRIP-steels", Proceedings of Symposium Austenite Formation and Decomposition, Chicago, Illinois, Nov. 9-12, 2003, p. 549-561.
33. nd Mechanical Working and Steel Processing Conference Proceedings, Toronto, Oct. 23-25, 2000, ISS, Warrendale (2000), p. 549-561.
34. H. C. Chen, H. Era, and M. Shimizu, "Effect of Phosphorus on the Formation of Retained Austenite and Mechanical Properties in Si-Containing Low-Carbon Steel Sheet", Met. Trans. 20A (1989) pp. 437.
35. th Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale (1998) pp. 259
36. L. Barbe, L. Tosal-Martinez, B. De Cooman, "Effect of phosphorus on the properties of a cold rolled and intercritically annealed TRIP-aided steel", Proceedings Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19-21, 2002, p. 147-151.
37. S. Traint, E. Werner, A.Pichler, P.Stiaszny, "Niedriglegierte TRIP-Feinbleche mit Kupferzusatz", BHM 144 (9) (1999) p. 362-368.
38. S. Traint, A. Pichler, K. Hauzenberger, P. Stiaszny, E. Wemer, "Influence of silicon, aluminium, phosphorus and copper on the phase transformations of low alloyed TRIP-steels", steel research 73 (2002) No.6+7, p.259-266.
39. Y. Mi, "Effect of Cu, Mo, Si on the content of retained austenite of austempered ductile iron", Scr. Met. Mat, 32 (9) (1995), p.1313-1316.
40. S. Jiao, F. Hassani, R.L. Donaberger, E. Essadiqi, S. Yue, "The effect of processing history on a cold rolled and annealed Mo-Nb microalloyed TRIP steel", ISIJ Int. Vol. 42 (2002), No. 3, pp. 299-303.
41. S. Traint, A. Pichler, K. Spiradek-Hahn, K. Hulka, E. Werner, "The influence of Nb on the phase transformations and mechanical properties in Al- and Si-alloyed TRIP-steels", Proceedings of Symposium Austenite Formation and Decomposition, Chicago, Illinois, Nov. 9-12, 2003, p. 577-594.
42. J. Ohlert, W. Bleck, K. Hulka, "Control of microstructure in TRIP steels by niobium," Proceedings Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19-21, 2002, p. 199-206.
43. J. Ohlert, "Einfluß von chemischer Zusammensetzung und Herstellungsverlauf auf Mikrostruktur und mechanische Eigenschaften von TRIP-Stählen", PhD thesis, RWTH-Aachen, Shaker Verlag, 13 (2003).
44. J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, G. Krauss, "Quenching and partitioning: A fundamental new process to create high strength TRIP sheet microstructures", Proceedings of Symposium Austenite Formation and Decomposition, Chicago, Illinois, Nov. 9-12, 2003, p. 505-522.
45. J.G. Speer, D.K. Matlock, B.C. De Cooman, J.G. Schroth, "Carbon Partitioning into austenite after martensite transformation", Acta Mater., 51 (2003), p. 2611-2622.
46. K.Sugimoto, R. Kikuchi, S. Hashimoto, "Development of high strength low alloy TRIP-aided steels with annealed martensite", Proceedings Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19-21, 2002, p. 45-54.
47. K. Sugimoto, A.Kanda, R. Kikuchi, S. Hashimoto, T. Kashima, S. Ikeda, "Ductility and formability of newly developed high strength low alloy TRIP-aided sheet steels with annealed martensite matrix", ISIJ Intern. Vol. 42 (2002), No. 8, pp.910-915.
48. K. Sugimoto, K. Nakano, S. Song, T. Kashima, "Retained austenite characteristics and stretch-flangeability of high-strength low-alloy TRIP type bainitic sheet steels", ISIJ Int. Vol. 42 (2002), No.4, pp. 450-455.
49. M. Hillert, "The bay phenomenon in steels with reasonably strong carbide formers", Proceedings of Symposium Austenite Formation and Decomposition, Chicago, Illinois, Nov. 9-12, 2003, p. 3-14.
50. K. Ushioda, O. Akisue, K. Koyama, and T. Hayasnida, "Metallurgical Investigations for Producing Non-Aging Deep-Drawable Low-Carbon Al-Killed Steel Sheets by Continuous Annealing", Development in the Annealing of Sheet Steels, TMS, Warrendale, 1992, pp. 261.
51. E. F. Walker and R. C. Hudd, "Annealing Treatment of Extra Low and Ultra Low Carbon Steels", International Symposium: Modern LC and ULC Sheet Steels for Cold Forming, Department of Ferrous Metallurgy RWTH Aachen University of Technology, 1998, pp. 211.