PROCESSING AND PROPERTIES OF COLD-ROLLED TRIP STEELS

43rd Mechanical Working and Steel Processing Conference Proceedings

Volumn , Issue , 2001, Pages 411-434

  Pichler, A ^a   Traint, S ^b   Pauli, H ^a   Mildner, H ^a   Szinyur, J ^a   Blaimschein, M ^a   Stiaszny, P ^a   Werner, E ^b  

^a VOESTALPINE STAHL GMBH   (Austria)

^b TECHNICAL UNIVERSITY OF MUNICH   (Germany)

Author keywords

continuous annealed TRIP grade; formability; HDG TRIP grade; influence of the processing parameters; mechanical properties; microstructure; welding behavior

Indexed keywords

ANNEALING; COLD ROLLED STEEL; COLD ROLLING; COOLING; FORMABILITY; HIGH STRENGTH STEEL; METAL CLADDING; PLASTICITY; STEEL SHEET; TENSILE STRENGTH;

ANNEALING CYCLES; COLD-ROLLED; CONTINUOUS ANNEALED TRIP GRADE; CONTINUOUS ANNEALING; HDG TRIP GRADE; HOT-DIP GALVANIZING; INFLUENCE OF THE PROCESSING PARAMETER; RAPID COOLING; WELDING BEHAVIOR;

MICROSTRUCTURE;

EID: 85197776373     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (34)

1. P. Stiaszny, A. Pichler, E. Tragl, M. Kaiser, W. Schwarz, M. Pimminger, K. Kösters, and K. Spiradek, 'Influence of Annealing Technology on the Material Properties of LC and ULC Steel Grades', International Symposium: Modern LC and ULC Sheet Steels for Cold Forming, Department of Ferrous Metallurgy RWTH Aachen University of Technology, 1988, p. 225-236
2. N. Ohashi, T. Irie, S. Satoh, O. Hashimoto, and I. Takahashi, 'Development of Cold-Rolled High Strength Steel Sheet with Excellent Deep Drawability', SAE Technical Paper Series (810027), Warrendale, 1981
3. A. Pichler, M. Mayr, G. Hribernig, H. Presslinger, and P. Stiaszny, 'High Strength IF Steels: Production, Parameters and Properties', International Forum for Physical Metallurgy of IF Steels IF.IFS-94, The Iron and Steel Institute of Japan, 1994, p. 249-268
4. L. Meyer, W. Bleck, and W. Müschenborn, 'Product-Oriented IF Steel Design', International Forum for Physical Metallurgy of IF Steels IF.IFS-94, The Iron and Steel Institute of Japan, 1994, p. 203-222
5. M. Blaimschein, K. M. Radlmayr, A. Pichler, E. Till, and P. Stiaszny, 'Bake Hardening Effects in Components', Advanced Sheet Metal Forming, Proceeding of the 19th Biennial IDDRG Congress, The University of Miskolce, Miskolce, 1996, p. 445-458
6. A. T. Davenport, 'Formable HSLA and Dual Phase Steels', The Metallurgical Society of AIME, Warrendale, 1979
7. R. A. Kot and J. W. Morris, 'Structure and Properties of Dual Phase Steels', The Metallurgical Society of AIME, Warrendale, 1979
8. O. Matsumura, Y. Sakuma and H. Takechi, „TRIP and its Kinetic Aspects in Austempered 0.4C-1.5Si-0.8Mn Steel“, Scripta Met. 21 (1987) 1301
9. O. Matsumura, Y. Sakuma, and H. Takechi, „Enhancement of Elongation by Retained Austenite in Intercritical Annealed 0.4C-1.5Si-0.8Mn Steel“, Transaction ISIJ 27 (1987) 570
10. V. F. Zackay, E. R. Parker, D. Fahr, and R. Busch, „The Enhancement of Ductility in High-Strength Steels“, ASM Trans. Quart. 60 (1967) 252
11. T. Akbay and C. Atkinson, „The Influence of Diffusion of Carbon in Ferrite as Well as in Austenite on a Model of Reaustenitization from Ferrite/Cementite Mixtures in Fe - C Steels, J. of Mat. Sci. 31 (1996) 2221
12. T. Minote, S. Torizuka, A. Ogawa, and M. Niiura, „Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel, ISIJ International 36 (1996) 201
13. O. Matsumura, Y. Sakuma, and H. Takechi, „Retained Austenite in 0.4C - Si - 1.2 Mn Steel Sheet Intercritically Heated and Austempered“, ISIJ International 32 (1992) 1014
14. Y. Sakuma, O. Matsumura, and H. Takechi, „Mechanical Properties and Retained Austenite in Intercritically Heat-treated Bainite- Transformed Steel and their Variation with Si and Mn Additions“, Met. Trans. 22A (1991) 489
15. Y. Sakuma, O. Matsumura, and O. Akisue, „Influence and Annealing Temperature on Microstructure and Mechanical Properties of 400 °C Transformed Steel Containing Retained Austenite, ISIJ International 31 (1991) 1348
16. K. Sugimoto, N. Ususi, M. Kobayashi, and S. Hashimoto, „Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels“, ISIJ International 32 (1992) 1311
17. K. Sugimoto, M. Kobayashi, and S. Hashimoto, „Ductility and Strain-Induced Transformation in a High-Strength Transformation-Induced Plasticity-Aided Dual-Phase Steel“, Met. Trans. 23A (1992) 3085
18. K. Sugimoto, M. Misu, M. Kobayashi, and H. Shirasawa, „Effects of Second Phase Morphology on Retained Austenite Morphology and Tensile Properties in a TRIP-aided Dual-Phase Steel Sheet, ISIJ International 33 (1993) 775
19. W. C. Jeong, D. K. Matlock, and G. Krauss, „Observation of Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-1.5Mn Steel with Ferrite-Bainite-Austenite Structure, Mat. Sci. and Eng. A165 (1993) 1
20. W. C. Jeong, D. K. Matlock, and G. Krauss, „Effects of Tensile-Testing Temperature on Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-1.5Mn Steel with Ferrite-Bainite-Austenite Structure, Mat. Science and Eng. A165 (1993) 9
21. Itami, M. Takahashi, and K. Ushioda, „Plastic Stability of Retained Austenite in the Cold -Rolled 0.14 % C-1.9 % Si - 1.7 % Mn Sheet Steel“, ISIJ International 35 (1995) 1121
22. H. C. Chen, H. Era, and M. Shimizu, „Effect of Phosphorus on the Formation of Retained Austenite and Mechanical Properties in Si-Containing Low-Carbon Steel Sheet“, Met. Trans. 20A (1989) 437
23. Thyssen Stahl AG, DE Patent 196 10 675 C1, „Mehrphasenstahl und Verfahren zu seiner Herstellung“March 19, 1996
24. th Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 1998, p. 259
25. st Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 1999, p. 265
26. st Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 1999, p. 483
27. nd Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 2000, p. 549
28. M. De Meyer, D. Vanderschueren, and B.C. De Cooman, “The influence of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels”, ISIJ International 39 (1999) 813
29. P. Jacques, E. Girault, T. Catlin, N. Geerlofs, T. Kop, S. van der Zwaag, and F. Delanny, “Bainite Transformation of Low Carbon Mn - Si TRIP-assisted Multiphase Steels: Influence of Silicon Content on Cementite Precipitation and Austenite Retention”, Mat. Science and Engineering A273-275 (1999) 475
30. P. Stiaszny, E. Tragl, A. Pichler, R. Angerer, M. Hackl, and W. Hackl, “Development and Application of a Modern and Effective Annealing Simulation Equipment for Process- and Material Development”, TERMIC 2000, Las Vegas, Conference Proceeding to be Published
31. E. Wirthl, R. Angerer, and K. Hauzenberger, “Determination of the Volume Amounts of Retained Austenite in Small Specimens by Magnetic Measurements”, Presentation at the AISE 2000 Conference, Chicago
32. Technische Forschung Stahl: Förderung des Einsatzes von Stahl, Insbesondere von höherfesten kaltgewalzten und warmgewalzten Blechen im Automobilbau, VDEh, Abschlussbericht
33. rd Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 2001
34. nd Mechanical Working and Steel Processing Conference Proceedings, ISS, Warrendale, 2000, p. 573