Contact-fluid interfacial shear strength and its critical importance in elastohydrodynamic lubrication

Industrial Lubrication and Tribology

Volumn 58, Issue 1, 2006, Pages 4-14

  Zhang, Y ^a  

^a Shanxi Institute of Technology   (China)

Author keywords

Lubrication; Shear strength; Tribology

Indexed keywords

ELASTOHYDRODYNAMIC LUBRICATION; HYDRODYNAMICS; SURFACE CHEMISTRY; SURFACE TENSION; TRIBOLOGY;

CONTACT-FLUID; FLUID FILM PRESSURE; SLIPPAGE EFFECTS;

SHEAR STRENGTH;

EID: 33644529748     PISSN: 00368792     EISSN: None     Source Type: Journal    
DOI: 10.1108/00368790610640064     Document Type: Article

References (31)

1. Bair, S. and Winer, W.O. (1992), “The high pressure high shear stress rheology of liquid lubricants”, ASME Jour. Trib., Vol. 114, p. 1.
2. Begelinger, A. and Gee de, A.W.J. (1974), “Thin film lubrication of sliding point contacts of AISI 52100 steel”, Wear, Vol. 28, pp. 103-14.
3. Begelinger, A. and Gee de, A.W.J. (1976), “On the mechanism of lubricant film failure in sliding concentrated steel contacts”, ASME Jour. Lubri. Tech., Vol. 98, pp. 575-9.
4. Czichos, H. and Kirschke, K. (1972), “Investigations into film failure (transition point) of lubricated concentrated contacts”, Wear, Vol. 22, pp. 321-36.
5. Evans, C.R. and Johnson, K.L. (1986), “The rheological properties of elastohydrodynamic lubricants”, Proc. Instn. Mech. Engrs., Vol. 200, pp. 303-12.
6. Feng, R. and Ramesh, K.T. (1993), “The rheology of lubricants at high shear rates”, ASME Jour. Trib., Vol. 115, pp. 640-9.
7. Gecim, B. and Winer, W.O. (1980), “Lubricant limiting shear stress effect on EHL film thickness”, ASME Jour. Lubri. Tech., Vol. 102, pp. 213-21.
8. Hoglund, E. and Jacobson, B. (1986), “Experimental investigation of the shear strength of lubricants subjected to high pressure and temperature”, ASME Jour. Trib., Vol. 108, pp. 571-8.
9. Jacobson, B.O. and Hamrock, B.J. (1984), “Non-Newtonian fluid model incorporated into elastohydrodynamic lubrication of rectangular contacts”, ASME Jour. Trib., Vol. 106, pp. 275-84.
10. Kaneta, M., Nishikawa, H. and Kameishi, K. (1990), “Observation of wall slip in elastohydrodynamic lubrication”, ASME Jour. Trib., Vol. 112, pp. 447-52.
11. Kaneta, M. et al., (1996), “Abnormal phenomena appearing in EHL contacts”, ASME Jour. Trib., Vol. 118, pp. 886-92.
12. Kannel, J.W. and Bell, J.C. (1971), “Interpretations of the thickness of lubricant films in rolling contact: Part I-Examination of measurements obtained by X-rays”, ASME Jour. Lubri. Tech., Vol. 93, pp. 478-84.
13. Paul, G.R. and Cameron, A. (1979), “The ultimate shear stress of fluids at high pressures measured by a modified impact microviscometer”, Proc. Roy. Soc. Lond., Vol. A. 365, pp. 31-41.
14. Pinkus, O. and Sternlicht, B. (1961), Theory of Hydrodynamic Lubrication, McGraw-Hill, New York, NY.
15. Rozeanu, L. and Snarsky, L. (1977), “The unusual behavior of a lubricant boundary layer”, Wear, Vol. 43, pp. 117-26.
16. Rozeanu, L. and Snarsky, L. (1978), “Effect of solid surface lubricant interaction on the load carrying capacity of sliding bearings”, ASME Jour. Lubri. Tech., Vol. 100, pp. 167-75.
17. Rozeanu, L. and Tipei, N. (1980), “Slippage phenomena at the interface between the adsorbed layer and the bulk of the lubricant: theory and experiment”, Wear, Vol. 64, pp. 245-57.
18. Shieh, J. and Hamrock, B.J. (1991), “Film collapse in EHL and micro-EHL”, ASME Jour. Trib., Vol. 113, pp. 372-7.
19. Smith, F.W. (1960), “Lubricant behavior in concentrated contacts-some rheological problems”, ASLE Trans., Vol. 3, pp. 18-25.
20. Tabor, B.J. (1981), “Failure of thin film lubrication-an expedient for the characterization of lubricants”, ASME Jour. Lubri. Tech., Vol. 103, pp. 497-501.
21. Zhang, Y. (2003a), “Prevention of interfacial slippage in isothermal pure rolling line contact elastohydrodynamic lubrication under heavy load”, Proc. Instn. Mech. Engrs. Part J: J. Eng. Trib., Vol. 217, pp. 323-31.
22. Zhang, Y. (2004a), “Mixed rheologies in elastohydrodynamic lubrication”, Ind. Lubri. & Trib., Vol. 56, pp. 88-106.
23. Zhang, Y. (2004b), “Contact surface irregularity and contact-fluid interfacial slip effects in elastohydrodynamic lubrication”, Jour. Bal. Trib. Assoc., Vol. 10 No. 3, pp. 368-82.
24. Zhang, Y. et al., (2001a), “About the load-carrying capacity of elastohydrodynamic lubrication film”, Trib. Trans., Vol. 44, pp. 1-10.
25. Zhang, Y. et al., (2001b), “A lubrication deviation from the classical EHL theory by the lubricant viscoplasticity: Part II-Boundary of lubrication regimes”, Trib. Trans., Vol. 44, pp. 305-9.
26. Zhang, Y. et al., (2002a), “An analysis of elastohydrodynamic lubrication with limiting shear stress: Part I-Theory and solutions”, Trib. Trans., Vol. 45, pp. 135-44.
27. Zhang, Y. et al., (2002b), “EHL film thickness limitation theory under a limiting shear stress”, Trib. Trans., Vol. 45, pp. 531-9.
28. Cioc, C., Cioc, S., Moraru, L., Kahraman, A. and Keith, T.G. (2002), “A deterministic elastohydrodynamic lubrication model of high-speed rotorcraft transmission components”, Trib. Trans., Vol. 45, pp. 556-62.
29. Zhang, Y. (2005), “How does dry contact occur in elastohydrodynamic lubrication?”, Ind. Lubri. & Trib., Vol. 57 No. 5.
30. Zhang, Y. (2006), “Shear strength of a fluid in the whole ranges of pressure and temperature”, Ind. Lub & Trib., Vol. 58 No. 2.
31. Zhang, Y. and Wen, S. (2000), “EHL performance of the lubricant with shear strength: Part I-Boundary slippage and film failure”, Trib. Trans., Vol. 43, pp. 700-10.