The tensile response of a fine-grained AA5754 alloy produced by asymmetric rolling and annealing

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 997-1006

  Jin, H ^a   Lloyd, D J ^a  

^a Kingston R and D Centre   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ACCUMULATION RATES; ALTERNATIVE METHODS; ASYMMETRIC ROLLING; DYNAMIC RECOVERY; EQUAL CHANNEL ANGULAR EXTRUSION; FINE GRAINS; FINE-GRAINED MATERIAL; GRAIN SIZE; GRAIN STRUCTURES; HALL PETCH RELATIONSHIP; HIGH YIELD; MG ALLOY; STRESS-STRAIN RESPONSE; TENSILE ELONGATION; TENSILE RESPONSE;

ALLOYS; ANNEALING; COLD ROLLING; DYNAMIC RESPONSE; ELECTRIC FIELD EFFECTS; ELONGATION; GRAIN SIZE AND SHAPE; HOT ROLLING;

TENSILE STRENGTH;

EID: 33644488373     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1003-x     Document Type: Article

References (45)

1. Ultrafine Grained Materials II, Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C. Lowe, eds., TMS Warrendale,PA, 2002.
2. M. Furukawa, Z. Horita, M. Nemoto, and T. Langdon: Mater. Sci. Eng. A, 2002, vol. A324, pp. 82-89.
3. J.S. Hayes, R. Keyte, and P.B. Prangnell: Mater. Sci. Technol., 2000, vol. 16, pp. 1259-63.
4. T. Hebesberger, R. Pippan, and H.P. Stuwe: Ultrafine Grained Materials II, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C. Lowe, eds., TMS, Warrendale, PA, 2002, pp. 133-40.
5. Y. Saito, H. Utsunomiya, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 578-83.
6. C.-H. Choi, K.-H. Kim, and D.N. Lee: Mater. Sci. Forum, 1998, vols. 273-275, pp. 391-96.
7. Q. Cui and K. Ohari: Mater. Sci. Technol., 2000, vol. 16, pp. 1095-1101.
8. D.G. Morris and M.A. Munoz-Morris: Acta Mater., 2002, vol. 50, pp. 4047-60.
9. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, UK, 1995, pp. 173-216.
10. G.B. Burger, A.K. Gupta, P.W. Jeffrey, and D.J. Lloyd: Mater. Characterization, 1995, vol. 35, pp. 23-39.
11. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 5031-39.
12. S.A. Court, K.M. Gatenby, and D.J. Lloyd: Mater. Sci. Eng., 2001,vols. A319-A321, pp. 443-47.
13. B.J. Brindley and P.J. Worthington: Metall. Rev., 1970, vol. 145, pp. 101-14.
14. W.B. Morrison and R.L. Miller: Ultrafine-Grain Metals, John J. Burke and Volker Weiss eds., Syracuse University Press, Syracuse, NY, 1970, pp. 183-211.
15. N. Tsuji, Y. Ito, Y. Koizumi, Y. Minamino, and Y. Saito: Ultrafine Grained Materials II, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C. Lowe, eds., TMS, Warrendale, PA, 2002, pp. 389-97.
16. D.J. Lloyd: Met. Sci., 1980, vol. 14, pp. 193-98.
17. R. Mahmudi: Mater. Lett., 1994, vol. 19, pp. 243-46.
18. D.J. Lloyd and L.R. Morris: Acta Mater., 1977, vol. 25, pp. 857-61.
19. D.J. Lloyd, S.A. Court, and K.M. Gatenby: Mater. Sci. Technol., 1997, vol. 13, pp. 660-66.
20. H. Conrad: Mater. Sci. Eng., 2003, vol. A341, pp. 216-28.
21. R.Z. Valiev, N.A. Krasilnikov, and N.K. Tsenev: Mater. Sci. Eng., 1991, vol. A137, pp. 35-40.
22. M. Furkawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon:Acta Mater., 1996, vol. 44, pp. 4619-629.
23. P. Lukac: Mater. Sci. Forum, 1996, vols. 217-222, pp. 71-82.
24. U.F. Kocks: Trans. ASME, J. Eng. Mater. Technol. 1976, vol. 98, pp. 76-85.
25. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.
26. U.F. Kocks and H. Mecking: Progr. Mater. Sci., 2003, vol. 48,pp. 171-273.
27. J.H. Palm: Appl. Sci. Res., Sect. A, 1948, vol. 1, pp. 198-210.
28. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537-562.
29. D.J. Lloyd, H. Sang, J.D. Embury, P. Wycliffe, and G. LeRoy: Mater. Sci. Eng., 1978, vol. 36, pp. 35-46.
30. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
31. H. Conrad: Ultrafine?Grain Metals, John J. Burke and Voker Weiss,eds., Syracuse University Press, Syracuse, NY, 1970, pp. 213-29.
32. M.F. Ashby: Phil. Mag., 1970, vol. 21, pp. 399-424.
33. A. Needleman and J. Gil Sevillano: Scripta Mater., 2003, vol. 48, pp. 109-83.
34. D.J. Lloyd and S.A. Court: Mater. Sci. Technol., 2003, vol. 19, pp. 1349-54.
35. Y. Estrin and H. Mecking: Elastic-Plastic Failure Modeling of Structures with Applications, D. Hui and T.J. Kozik, eds., ASME, New York, NY, 1988, vol. 141, pp. 181-91.
36. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57-70.
37. T. Narutani and J. Takamura: Acta Metall., 1991, vol. 39, pp. 2037-49.
38. M.H. Shankula, D.J. Lloyd, and J.D. Embury: Acta Metall., 1970, vol. 18, pp. 1293-99.
39. A.W. Thompson and M.I. Baskes: Phil. Mag., 1973, vol. 28, pp. 301-08.
40. D.A. Hughes, N. Hansen, and D.J. Bammann: Scripta Mater., 2003, vol. 48, pp. 147-53.
41. Q. Liu, X. Huang, D.J. Lloyd, and N. Hansen: Acta Mater., 2002, vol. 50, pp. 3789-3802.
42. A. Considere: Ann. Ponts et Chaussées, 1885, vol. 9, pp. 574-775.
43. D.J. Lloyd: Scripta Mater., 2003, vol. 48, pp. 341-44.
44. M. Legros, B.R. Elliot, M.N. Rittner, J.R. Wertman, and K.J. Hemker: Phil. Mag. A, 2000, vol. 80, pp. 1017-26.
45. V.L. Tellkamp, A. Melmed, and E.J. Lavemia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2335-43.