Potential strength of Nicalon™, Hi Nicalon™, and Hi Nicalon Type S™ monofilaments of variable diameters

Composites Part A: Applied Science and Manufacturing

Volumn 37, Issue 3, 2006, Pages 405-412

  Morimoto, Tetsuya ^a   Ogasawara, Toshio ^a  

^a JAPAN AEROSPACE EXPLORATION AGENCY   (Japan)

Author keywords

A. Ceramic fibre; B. Strength; C. Statistical properties methods; D. Mechanical testing

Indexed keywords

CERAMIC FIBERS; ELASTIC MODULI; MECHANICAL TESTING; SILICON CARBIDE;

MONOFILAMENTS; SIC MONOFILMANETS;

MECHANICS;

EID: 32644453703     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2005.05.046     Document Type: Article

References (45)

1. Michio Takeda, Jun-ichi Sakamoto, Yoshikazu Imai, and Hiroshi Ichikawa Thermal stability of the low-oxygen-content silicon carbide fiber, Hi-Nicalon™ Compos Sci Technol 59 1999 813 819
2. Michio Takeda, Akira Urano, Jun-Ichi Sakamoto, and Yoshikazu Imai Microstructure and oxidative degradation behavior of sillicon carbide fiber Hi-Nicalon Type S J Nucl Mater 1998 1594 1599
3. D. Michael Sacks Effect of composition and heat treatment conditions on the tensile strength and creep resistance of SiC-based fibers J Eur Ceram Soc 19 1999 2305 2315
4. Hisaichi Ohnabe, Shoju Masaki, Masakazu Onozuka, Kaoru Miyahara, and Tadashi Sasa Potential application of ceramic matrix composites to aero-engine components Compos: Part A 30 1999 489 496
5. R. Jones, A. Szweda, and D. Petrak Polymer derived ceramic matrix composites Compos: Part A 30 1999 569 575
6. A.R. Bunsell, and H. Berger Fine diameter ceramic fibres J Eur Ceram Soc 20 2000 2249 2260
7. Laifei Cheng, Yongdong Xu, Litong Zhang, and Xiaowei Yin Oxidation behavior of three-dimensional SiC/SiC composites in air and combustion environment Compos: Part A 31 2000 1015 1020
8. G. Kister, and B. Harris Tensile properties of heat-treated Nicalon and Hi-Nicalon fibres Compos: Part A 33 2002 435 438
9. L.L. Snead, R.H. Jones, A. Kohyama, and P. Fenic Status of silicon carbide composites for fusion J Nucl Mater 1996 233 237
10. Everett E. Bloom The challenge of developing structural materials for fusion power systems J Nucl Mater 1998 258 263
11. f/SiC composites prepared by CVI J Nucl Mater 1998 1540 1545
12. A. Hasegawa, A. Kohyama, R.H. Jones, L.L. Snead, B. Riccardi, and P. Fenici Critical issues and current status of SiC/SiC/composites for fusion J Nucl Mater 2000 283 287
13. R. Yamada, T. Taguchi, and N. Igawa Mechanical and thermal properties of 2D and 3D SiC/SiC Composites J Nucl Mater 2000 574 578
14. f/SiC composites for fusion energy applications J Nucl Mater 2002 1057 1072
15. f/SiC composites or fusion energy applications J Nucl Mater 2002 1120 1125
16. T. Taguchi, E. Wakai, N. Igawa, S. Nogami, L.L. Snead, and A. Hasegawa Effect of simultaneous ion irradiation on microstructural change of SiC/SiC composites at high temperature J Nucl Mater 2002 1135 1140
17. T. Hinoki, L.L. Snead, Y. Katoh, A. Hasegawa, T. Nozawa, and A. Kohyama The effect of high dose/high temperature irradiation on high purity fibers and their silicon carbide composites J Nucl Mater 2002 1157 1162
18. M. Ishihara, S. Baba, T. Hoshiya, and T. Shikama Irradiation effects on thermal expansion of SiC/SiC composite materials J Nucl Mater 2002 1168 1172
19. T. Nozawa, T. Hinoki, Y. Katoh, and A. Kohyama Effects of fibers and fabrication processes on mechanical properties of neutron irradiated SiC/SiC composites J Nucl Mater 2002 1173 1177
20. N. Igawa, T. Taguchi, L.L. Snead, Y. Katoh, S. Jitsukawa, and A. Kohyama Optimizing the fabrication process for superior mechanical properties in the FCVI SiC Matrix/stoichiometric SiC fiber composite system J Nucl Mater 2002 1205 1209
21. R. Yamada, N. Igawa, and T. Taguchi Highly thermal conductive, sintered SiC fiber-reinforced 3D-SiC/SiC composites: experiments and finite-element analysis of the thermal diffusivity/conductivity J Nucl Mater 2002 1215 1220
22. R. Scholz, F. dos Santos Marques, and B. Riccardi Electrical conductivity of silicon carbide composites and fibers J Nucl Mater 2002 1098 1101
23. W. Weibull A statistical distribution function of wide applicability J Appl Mech 3 18 1951 293 297
24. B.D. Coleman On the strength of classical fibres and fibre bundles J Mech Phys Solids 7 1958 60 70
25. Sybrand van der Zwaag The concept of filament strength and the Weibull modulus J Test Eval 1989 292 298
26. N. Pan, H.C. Chen, J. Thompson, M.K. Inglesby, S. Khatua, X.S. Zhang, and H. Zeronian The size effects on the mechanical behaviour of fibres J Mater Sci 32 1997 2677 2685
27. D.M. Wilson Statistical tensile strength of Nextel™ 610 and Nextel™ 720 fibres J Mater Sci 32 1997 2535 2542
28. M.R. Gurvich, A.T. Dibenetto, and V. Ranade A new statistical distribution for characterizing the random strength of brittle materials J Mater Sci 32 1997 2559 2564
29. M.R. Gurvich, A.T. Dibenedetto, and A. Pegoretti Evaluation of the statistical parameters of a Weibull distribution J Mater Sci 32 1997 3711 3716
30. Y.T. Zhu, W.R. Blumenthal, S.T. Taylor, and C. Lowe Analysis of size dependence of ceramic fiber and whisker strength J Am Ceram Soc 80 6 1997 1447 1452
31. P. Zinck, J.F. Gérard, and D. Wagner On the significance and description of the size effect in multimodal fracture behavior. Experimental assessment on E-glass fibers Eng Fract Mech 69 2002 1049 1055
32. Shantaram SP, Gyekenyesi JP. Calculation of Weibull strength parameters and batdorf flaw-density constants for volume- and surface-flaw-induced fracture in ceramics. NASA Technical Memorandum 100890.
33. K. Trustrum, and De S. Jayatilaka On estimating the Weibull modulus for a brittle material J Mater Sci 14 1979 1080 1084
34. Bill Bergman On the estimation of the Weibull modulus J Mater Sci Lett 3 1984 689 692
35. W.F. Knoff Combined weakest link and random defect model for describing strength variability in fibres J Mater Sci 28 1993 931 941
36. V. Lavaste, J. Besson, and R. Bunsell Statistical analysis of strength distribution of aluminum based single fibres accounting for fibre diameter variations J Mater Sci 30 1995 2042 2048
37. Eddy Vanswijgenhoven, Konstantza Lambrinow, Martine Wevers, and Omer Van Der Biest Comparative study of the surface roughness of Nicalon and Tyranno silicon carbide fibers Compos: Part A 29 1998 1417 1423
38. T. Morimoto, J. Goering, and H. Schneider a new method for measuring diameter distribution along ceramic fiber Ceram Eng Sci Proc 19 3 1998 47 54
39. E. Lara-Curzio, and M. Russ On the relationship between the parameters of the distributions of fiber diameters, breaking loads, and monofilament strengths J Mater Sci Lett 18 24 1999 2041 2044
40. I.J. Davies, and T. Ishikawa Bundle to bundle variation of mean fibre radius for Tyranno LoxM Si-Ti-C-O fibres J Mater Sci Lett 20 6 2001 505 507
41. I.J. Davies Effect of radius variation on the mean strength of brittle fibres J Mater Sci Lett 20 12 2001 1103 1105
42. Yuping Zhang, Xungai Wang, Ning Pan, and R. Postle Weibull analysis of the tensile behavior of fibers with geometrical irregularities J Mater Sci 37 2002 1401 1406
43. T.A. Morimoto Representative diameter for the evaluation of brittle fiber strength H. Fukuda T. Ishikawa Y. Kogo Proceedings of the Ninth United States-Japan Conference on Composite Materials 2000 Japan Society for Composite Materials Tokyo 265 272
44. T. Morimoto A representative diameter for the Weibull scaling of variable diameter fiber strength Compos: Part A 34 2003 597 601
45. Morimoto T and Aoki RM. The Weibull moduli of Si-Zr-C-O fiber with diameter variation along the gauge length. Proceedings of the 12th international conference on composite materials (ICCM/12), CD-ROM; 1999.