High temperature behavior of Ni-base weld metal Part II - Insight into the mechanism for ductility dip cracking

Materials Science and Engineering: A

Volumn 380, Issue 1-2, 2004, Pages 245-258

  Ramirez, A J ^a,b   Lippold, J C ^b  

^a LABORATÓRIO NACIONAL DE LUZ SÍNCROTRON   (Brazil)

^b OHIO STATE UNIVERSITY   (United States)

Author keywords

Carbides; Ductility dip cracking; Grain boundary sliding; Ni base filler metal; Nitrides; Precipitate effect

Indexed keywords

CRACK INITIATION; CREEP; DUCTILITY; EVALUATION; FILLER METALS; SCANNING ELECTRON MICROSCOPY; STRAIN; TRANSMISSION ELECTRON MICROSCOPY; WELDING;

DUCTILITY DIP CRACKING; INTERGRANULAR CRACKING;

NICKEL;

CRACKING; HIGH TEMPERATURE CORROSION; NICKEL; WELD;

EID: 3242658778     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2004.03.075     Document Type: Article

References (62)

1. M.G. Collins, An investigation of ductility dip cracking in nickel-base filler materials, Master thesis, The Ohio State University, Columbus, OH, USA, 2002, p. 240.
2. Collins M.G.Lippold J.C. Weld. J. 82 10 2003 288s-295s
3. Collins M.G.Ramirez A.J.Lippold J.C. Weld. J. 832 2004 39s-49s
4. Rhines F.N.Wray P.J. Trans. ASM 54 1961 117-128
5. A.H. Cottrell, Intercrystalline creep fractures, in: Structural Process in Creep, The Iron Steel Institute, London, 1961, pp. 1-18.
6. S. Floreen, Microstructural and environmental effects during creep crack growth in superalloys, in: Elastic-Plastic Fracture - Second Symposium, vol. I, Inelastic Crack Analysis - ASTM Special Technical Publication 803, ASTM, Baltimore, MD, 1983. pp. I-708-I-720.
7. J.C. Runkle, R.M. Pelloux, Micromechanisms of low cycle fatigue in nickel-base superalloys at elevated temperatures, in: Fatigue Mechanics-ASTM Special Technical Publication 675, ASTM, Baltimore, MD, 1979, pp. 501-524.
8. H.R. Tipler, Y. Lindblom, J.H. Davidson, Damage accumulation and fracture in creep of Ni-base alloys, in: D. Coutsouradis, P. Felix, H. Fischmeister, L. Habraken, Y. Lindblom, M.O. Speidel (Ed.), High Temperature Alloys For Gas Turbines, Applied Science Publishers Ltd., Great Britain, 1978, pp. 359-407.
9. Chen Q.Z.Jones N.Knowles D.M. Acta Mater. 50 2002 1095-1112
10. Kihara S.Newkirk J.B.Ohtomo A.Saiga Y. Metall. Trans. A 11 1980 1019-1031
11. Murata M.Tanaka H.Abe F.Irie H. Key. Eng. Mater. 171-174 2000 513-520
12. Mathew M.D.Sasikala G.Mannan S.L.Rodriguez P. Trans. ASME - J. Eng. Mat. Technol. 115 1993 163-170
13. Raj R. Acta Metall. 26 1978 341-349
14. Kattner U.R. JOM 49 12 1997 14-19
15. J.C. Lippold, W.A.T. Clark, M. Tumuluru, in: M.J. Cieslak, J.H. Perepezko, S. Kang, M.W. Glicksman (Eds.), The Metal Science of Joining, The Metals, Minerals and Materials Society, Warrendale, PA, 1992, pp. 141-146.
16. Collins M.G.Ramirez A.J.Lippold J.C. Weld. J. 82 12 2003 348s-354s
17. Mintz B.Yue S.Jonas J.J. Int. Mater. Rev. 365 1991 187-217
18. A.H. Cottrell, Structural processes in creep: Report of a symposium organized by the Iron and Steel Institute and the Institute of Metals, London, 3 and 4 May 1961, The Iron Steel Institute, London, 1961, pp. 1-55.
19. R.W. Evans, B. Wilshire, Introduction to Creep, The institute of Materials, London, UK, 1993, p. 115.
20. G. Gottstein, L.S. Shvindlerman, Grain Boundary Migration in Metals, CRC press, Boca Raton, FL, 1999, pp. 133-150.
21. Tancret F.Badeshia H.K.D.H. Mater. Sci. Technol. 19 2003 291-295
22. DuPont J.N.Robino C.V.Marder A.R. Weld. J. 77 1998 417s-431s
23. M. Johnson, S. Fiore, J.C. Lippold, Evaluation of EN82H Filler Metal and shielding Gas-EWI Project 45371CSP, EWI-OSU Final Report, Columbus, OH, USA, June 2002, pp. 1-2.
24. Merrick H.F.Floreen S. Metall. Trans. 9A 1978 231-236
25. Lim L.C.Raj R. Acta Metall. 32 1984 1183-1190
26. Lehockey E.M.Palumbo G. Mater. Sci. Eng. 237A 1997 168-172
27. A.J. Ramirez, J.C. Lippold, Internal Research Report, The Ohio State University, Columbus, OH, 2002, pp. 1-35.
28. Shinoda T.Zaghloul M.B.Kondo Y.Tanaka R. Trans. ISIJ 18 1978 139-148
29. Pavinich W.Raj R. Metall. Trans. 8A 1977 1917-1933
30. Hosoi Y.Abe S. Metall. Trans. 6A 1975 1171-1178
31. Merrick H.F. Metall. Trans. 5 1974 891-897
32. Kotval P.S.Venables J.D.Calder R.W. Metall. Trans. 3 1972 453-458
33. Garimella L.Lian P.K.Klarstrom D.L. J. Met. 49 1997 67-71
34. Venkiteswaran P.K.Bright M.W.A.Taplin D.M.R. Mater. Sci. Eng. 11 1973 255-268
35. Hättestrand M.Andrén H.O. Acta Mater. 49 2001 2123-2128
36. Sawada K.Kubo K.Abe F. Mater. Sci. Eng. A319-321 2001 784-787
37. Murata M.Tanaka H.Abe F.Irie H. Key Eng. Mater. 171-174 2000 513-520
38. C.F. Etienne, O.V. Rossum, F. Roode, Proceedings of the International Conference Engineering Aspects of Creep, Sheffield, England, 15-19 September 1980, vol. II, The Institution of Mechanical Engineers, London, 1980, pp. 113-121.
39. Fleck R.G.Taplin D.M.R.Beevers C.J. Acta Metall. 23 1975 415-424
40. Raj R. Acta Metall. 26 1978 995-1006
41. Dyson B.F.Rodgers M.J. Metal Sci. 8 1974 261-266
42. R. Raj, Flow and Fracture at Elevated Temperatures, ASM, USA, 1985, pp. 396-402.
43. H.U. Hong, S.W. Nam, in: Proceedings of the Fatigue-David L. Davison Symposium, Seattle, USA, 17-21 February 2002, TMS, Warrendale, PA, 2002, pp. 247-259.
44. Hong H.U.Nam S.W. Mater. Sci. Eng. A332 2002 255-261
45. Eberhart M.E.Latanision R.M.Johnson K.H. Acta Metall. 33 1985 1769-1783
46. Tang S.Freeman A.J. Phys. Rev. B 475 1993 2441-2445
47. K. Nishimoto, H. Mori, H. Hirata, Proceedings of the7th JWS International Symposium on Today and Tomorrow in Science and Technology of Welding and Joining, Kobe, Japan, 20-22 November 2001, vol. 2, Japan Welding Society, 2001, pp. 827-832.
48. Wu R.Freeman A.J.Olson G.B. Science 265 1994 376-380
49. Huang X.Chaturvedi M.C.Richards N.L.Jackman J. Acta Mater. 458 1997 3095-3107
50. R.W. Swindeman, G.M. Goodwin, J.F. King, C.D. Lundin, Y.P. Qiao, Proceedings of the Third International Conference on Improved Coal-Fired Power Plants, San Francisco, USA, April 2-4, 1991. Electric Power Research Institute, Palo Alto, CA, 1992, pp. 17.1-17.15.
51. W. Yeniscavich, C.W. Fox, Proceedings of the symposium Effects of Minor Elements on the Weldability of High-Nickel Alloys, Welding Research Council, New York, 1969, pp. 24-35.
52. Benhadad S.Richards N.L.Chaturvedi M.C. Metall. Mater. Trans. 33A 2002 2005-2017
53. K. Nishimoto, S. Hongou, N. Kubo, S. Koga, H. Nagatani, K. Ogawa, H. Hirata, in: Proceedings of the 7th JWS International Symposium on Today and Tomorrow in Science and Technology of Welding and Joining, Kobe, Japan, 20-22 November, 2001, Japan Welding Society, 2001, vol. 2, pp. 833-838.
54. L. Mayer, H. de Boer, Proceedings of the International Conference Welding of HSLA Structural Steels, Rome, Italy, November 9-12, 1976. American Society of Metals, Associazione Italiana di Metallugia, Metals Park, OH, 1978, pp. 42-62.
55. Mohamed Z. Mater. Sci. Eng. A326 2002 255-260
56. Li L.Messler R.W.Jr. Metall. Mater. Trans. 33A 2002 2031-2042
57. M.M. Schwartz, Ceramic Joining, ASM International, Metals Park, OH, USA, 1990, p. 6.
58. G.F. Vander Voort, H.M. James, Wrought heat-resistant alloys, in: Metallography and Microstructure, ASM Handbook, vol. 9, ASM International, Materials Park, OH, 1985, pp. 305-329.
59. R.G. Thompson, Welding metallurgy of nonferrous high-temperature materials, in: Welding, Brazing and Soldering, ASM Handbook, vol. 6, ASM International, Materials Park, OH, 1993, pp. 566-574.
60. Matsuda F.Katayama S.Arata Y. Trans. JWRI 122 1983 87-92
61. Lippold J.C.Baeslack W.A.IIIVarol I. Weld. J. 711 1992 1s-14s
62. J.A. Talento, Proceedings of the symposium Effects of Minor Elements on the Weldability of High-Nickel Alloys, Welding Research Council, New York, 1969, pp. 121-137.