Reliability-based design optimization of aeroelastic structures

Structural and Multidisciplinary Optimization

Volumn 27, Issue 4, 2004, Pages 228-242

  Allen, M ^a   Maute, K ^a  

^a UCB 450   (United States)

Author keywords

Design optimization; First order reliability method; Nonlinear aeroelasticity; Stochastic analysis

Indexed keywords

APPROXIMATION THEORY; ELASTICITY; OPTIMIZATION; PROBABILITY; PROBLEM SOLVING; RELIABILITY; STRUCTURAL ANALYSIS;

FIRST-ORDER RELIABILITY METHOD; NONLINEAR AEROELASTICITY; STOCHASTIC ANALYSIS;

AERODYNAMICS;

EID: 3142541268     PISSN: 1615147X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00158-004-0384-1     Document Type: Article

References (71)

1. Allen, M.; Maute, K. 2003: Shape Optimization of Aeroelastic Structures under Uncertainties. 16th AIAA Computational Fluid Dynamics Conference, June 23-26, Orlando, FL
2. Box, G. 1988: Signal-to-Noise Rations, Performance Criteria, and Transformations. Technometrics 30(1), pp. 141-149
3. Cai, X.-C.; Farhat, C.; Sarkis, M. 1998: A Minimum Overlap Restricted Additive Schwarz Preconditioner and Applications in 3D Flow Simulations. The Tenth International Conference on Domain Decomposition Methods for Partial Differential Equations, ed. by Mandel, X.-C.C.J.; Farhat, C.
4. Cesare, M.; Sues, R. 1999: ProFES Probabilistic Finite Element System - Bringing Probabilistic Mechanics to the Desktop. AIAA-99-1607, 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, April 12-15, 1999/St. Louis, MO
5. Chandu, S.; Grandhi, R. 1995: General Purpose Procedure for Reliability Based Structural Optimization under Parametric Uncertainties. Adv Eng Softw 23, pp. 7-14
6. Chen, W.; Allen, J.; Mistree, F.; Tsui, K. 1996: A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors. ASME J Mech Des 118, pp. 478-485
7. Cornell, C. 1969: A Probability-Based Structural Code. J Am Concrete Inst 66(12), pp. 974-985
8. Das, I.; Dennis, J. 1997: A Closer Look at Drawbacks of Minimizing Weighted Sums of Objectives for Pareto Set Generation in Multicriteria Optimization Problems. Struct Optim 14, pp. 63-69
9. DeLaurentis, D.; Mavris, D. 2000: Uncertainty Modeling and Management in Multidisciplinary Analysis and Synthesis. 38th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV
10. Enevoldsen, I.; Sorensen, J. 1994a: Reliability-Based Optimization in Structural Engineering. Struct Saf 15, pp. 169-196
11. Enevoldsen, I.; Sorensen, J. 1994b. Reliability-Based Optimization as an Information Tool. Mech Struct Mach 22(1), pp.117-135
12. Engelund, S.; Rackwitz, R. 1993: A Benchmark Study on Importance Sampling Techniques in Structural Reliability. Struct Saf 12, pp. 255-276
13. Farhat, C.; Lesoinne, M.; Maman, N. 1995: Mixed Explicit/Implicit Time Integration of Coupled Aeroelastic Problems: Three-Field Formulation, Geometric Conservation and Distributed Solution. Int J Numer Methods Fluids 21, pp. 807-835
14. Farhat, C.; Degand, C.; Koobus, B.; Lesoinne, M. 1998a: Torsional Springs for Two-Dimensional Dynamic Unstructured Fluid Meshes. Comput Methods Appl Mech Eng 163, pp. 231-245
15. Farhat, C.; Lesoinne, M.; LeTallec, P. 1998b: Load and Motion Transfer Algorithms for Fluid/Structure Interaction Problems with Non-Matching Discrete Interfaces: Momentum and Energy Conservation, Optimal Discretization and Application to Aeroelasticity. Comput Methods Appl Mech Eng 157, pp. 95-114
16. Frangopol, D.; Corotis, R. 1996: Reliability-Based Structural System Optimization: State-of-the-Art verse State-of-the-Practice. Analysis and Computation: Proceedings of the Twelfth Conference held in Conjunction with Structures Congress XIV, ed. by Cheng, pp. 67-78
17. Ghattas, O.; Li, X. 1998: Domain Decomposition Methods for Sensitivity Analysis of a Nonlinear Aeroelastic Problem. Int J Comput Fluid Dyn 11, pp. 113-130
18. Gill, P.; Saunders, M.; Murray, W. 1997: SNOPT: An SQP Algorithm for Large-Scale Constrained Optimization. Report no 97-2m Department of Mathematics, University of California, San Diego
19. Grandhi, R.; Wang, L. 1998: Reliability-Based Structural Optimization Using Improved Two-Point Adaptive Nonlinear Approximations. Finite Elem Anal Des, pp. 35-48
20. Hasofer, A.; Lind, N. 1974: Exact and Invariant Second-Moment Code Format, J Eng Mech 100, pp. 111-121
21. Hohenbichler, M.; Rackwitz, R. 1986: Sensitivities and Importance Measures in Structural Reliability. Civ Eng Syst 3, pp. 203-209
22. Hou, G.-W.; Satyanarayana, A. 2000: Analytical Sensitivity Analysis of a Statical Aeroelastic Wing. AIAA 2000-4824, 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 6-8, 2000/Long Beach, CA
23. Imai, K.; Frangopol, D.M. 2000a: Geometrically Nonlinear Finite Element Reliability Analysis of Structural Systems. I: Theory. Comput Struct 77(6), pp. 677-691
24. Imai, K.; Frangopol, D.M. 2000b: Response Prediction of Geometrically Nonlinear Structures. J Struct Eng 126(11), pp. 1348-1355
25. Kahn, H. 1956: Use of Different Monte Carlo Sampling Techniques. Proc. Symp. on Monte Carlo Methods, New York, pp. 149-190
26. Kalos, M.; Whitlock, P. 1986: Monte Carlo Methods (Volume I: Basics). New York: John Wiley & Sons
27. Karamchandani, A.; Cornell, C. 1992: Sensitivity Estimation within First and Second Order Reliability Methods. Struct Saf 11(2), pp. 95-107
28. Kim, S-H.; Ra, K-W. 2000: Adaptive Importance Sampling Method for the Stochastic Finite Element Analysis. 8th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, South Bend, IN
29. Li, W.; Huyse, L.; Padula, S. 2002: Robust Airfoil Optimization to Achieve Consistent Drag Reduction over a Range of Mach Numbers. Struct Multidisc Optim 24, pp. 38-50
30. Luo, X.; Grandhi, R.V. 1997: ASTROS for Reliability-Based Multidisciplinary Structural Analysis and Optimization. Comput Struct 62, pp. 737-745
31. Madsen, H.; Krenk, S.; Lind, N. 1986: Methods of Structural Safety. Prentice-Hall, Inc., Englewook Cliffs, NJ, USA
32. Martins, J.; Alonso, J. 2002: High-Fidelity Aero-Structural Design Optimization of a Supersonic Business Jet. AIAA 2002-1483, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 22-25, 2002, Denver, CO
33. Maute, K.; Nikbay, M.; Farhat, C. 2000: Analytically Based Sensitivity Analysis and Optimization of Nonlinear Aeroelastic Systems. AIAA 2000-4825, 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 6-8, 2000, Long Beach, CA
34. Maute, K.; Nikbay, M.; Farhat, C. 2001: Coupled Analytical Sensitivity Analysis and Optimization of Three-Dimensional Nonlinear Aeroelastic Systems. AIAA J 39(11), pp. 2051-2061
35. Maute, K.; Nikbay, M.; Farhat, C. 2003: Sensitivity Analysis and Design Optimization of Three-Dimensional Nonlinear Aeroelastic Systems by the Adjoint Method. Int J Numer Methods Eng 56, pp. 911-933
36. Mavris, D.; Macsotai, N.; Roth, B. 1998: A Probabilistic Design Methodology for Commercial Aircraft Engine Cycle Selection. 3rd World Aviation Congress and Exposition, Anaheim, CA, SAE-985510
37. Mavris, D.; DeLaurentis, D. 1998: A Stochastic Design Approach for Aircraft Affordability. 21st ICAS Congress of the International Council on the Aeronautical Sciences, Melbourne, Australia
38. Melchers, R. 1990: Radial Importance Sampling for Structural Reliability. J Eng Mech 116(1), pp. 189-203
39. Meric, R. 1985: Coupled Optimization in Steady-State Thermoelasticity. J Therm Stresses 8, pp. 333-347
40. Meric, R. 1986: Material and Load Optimization of Thermoelastic Solids. Part I: Sensitivity Analysis. Part II: Numerical results. J Therm Stresses 9, pp. 359-372, 373-388
41. Meric, R. 1990: Optimal Cross-Sectional Shape for MHD Channel Flows. Int J Numer Methods Eng 30, pp. 919-929
42. Messac, A.; Ismail-Yahaya, A. 2002: Multiobjective Robust Design using Physical Programming. Struct Multidisc Optim 23, pp. 357-371
43. Michaleris, P.; Tortorelli, D.A.; Vidal, C.A. 1995: Analysis and Optimization of Weakly Coupled Thermoelastoplastic Systems with Application to Weldment Design. Int J Numer Methods Eng 38, pp. 1259-1285
44. Militello, C.; Felippa, C. 1991: The First ANDES Elements: 9-dof Plate Bending Triangles. Comput Methods Appl Mech Eng 91, pp. 217-246
45. Møller, H.; Lund, E. 2000: Shape Sensitivity Analysis of Strongly Coupled Fluid-Structure Interaction Problems. AIAA 2000-4823, 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 6-8, 2000, Long Beach, CA
46. Padmanabhan, D.; Batill, S. 2000: An Iterative Concurrent Subspace Robust Design Framework, AIAA 2000-4841, 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, September 6-8, Long Beach, CA
47. Parkinson, A.; Sorensen, C.; Pourhassan, N. 1993: A General Approach for Robust Optimality. Trans ASME 115, pp. 74-80
48. Pettit, C.; Grandhi, R. 2000: Multidisciplinary Optimization of Aerospace Structures with High Reliability. 8th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, South Bend, IN
49. Pettit, C.; Grandhi, R. 2001: Reliability Optimization of Aerospace Structures for Gust Response and Aileron Effectiveness. 8th International Conference on Structural Safety and Reliability, June 2001, Newport Beach, CA
50. Riha, D.S.; Thacker, B.H.; Millwater, H.R.; Wu, Y.-T.; Enright, M.P. 2000: Probabilistic Engineering Analysis Using the NESSUS Software. AIAA 2000-1512, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA
51. Roe, P. 1981: Approximate Riemann Solvers, Parameter Vectors and Difference Schemes. J Computat Phys 43, pp. 357-372
52. Rubinstein, R. 1981: Simulation of the Monte Carlo Method. New York: Wiley
53. Schittkowski, K. 1985: NLPQL: A FORTRAN Subroutine for Solving Constrained Nonlinear Programming Problems. Ann Oper Res 5, pp. 485-500
54. Shinozuka, M. 1983: Basic Analysis of Structural Safety. J Am Concrete Inst 109, pp. 721-740
55. Sobieszczanski-Sobieski, J. 1990: Sensitivity of Complex, Internally Coupled Systems. AIAA J 28, pp. 153-160
56. Su, J.; Renaud, J. 1997: Automatic Differentiation in Robust Optimization. AIAA J 35(6), pp. 1072
57. Sunderasan, S.; Ishii, K.; Houser, D. 1993: A Robust Optimization Procedure with Variation on Design Variables and Constraints. Adv Des Autom 65(1), pp. 379-386
58. Taguchi, G.; Wu, Y. 1979: Introduction to Off-Line Quality Control. Quality Control Associate
59. Taguchi, G. 1986a: Introduction to Quality Engineering. Krauss International Publications
60. Taguchi, G. 1986b: Systems of Experimental Design. Krauss International Publications Vol. 1 & 2
61. Taguchi, G. 1993: Taguchi on Robust Technology Development. ASME Press
62. Tortorelli, D.; Subramani, G.; Lu, S.; Haber, R. 1991: Sensitivity Analysis for Coupled Thermoelastic Systems. Int J Solids Struct 27, pp. 1477-1497
63. Wu, Y.-T.; Millwater, H.; Cruse, T. 1990: Advanced Probabilistic Structural Analysis Method for Implicit Performance Functions. AIAA J 12, pp. 255-276
64. Wu, Y.-T. 1992: Reliability Technology - 1992 28, New York: The American Society of Mechanical Engineers
65. Wu, Y.-T. et al. 2000: Probabilistic methods for design assessment of reliability with inspection (DARWIN). 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA
66. Yang, J.; Nikolaidis, E. 1991: Design of Aircraft Wings Subjected to Gust Loads: A Safety Index Based Approach. AIAA J 29(5), pp. 804-812
67. Yu, X.; Choi, K.; Chang, K. 1997a: A Mixed Design Approach for Probabilistic Structural Durability. J Struct Optim 14(2)-(3), pp. 81-90
68. Yu, X.; Choi, K.; Chang, K. 1997b: Reliability and Durability Based Design Sensitivity Analysis and Optimization. Tech. Rep. R97-01, Center for Computer Aided Design University of Iowa
69. Yu, X.; Chang, K.; Choi, K. 1998: Probabilistic Structural Durability Prediction. AIAA J 38(4), pp. 628-637
70. Zink, P.; Mavris, D.; Love, M.: Karpel, M. 1998: Robust Design for Aeroelastically Tailored/Active Aeroelastic Wing. 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, MO
71. Zink, P.; Raveh, D.; Mavris, D. 2000: Robust Structural Design for Active Aeroelastic Wing with Aerodynamic Uncertainties. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA