Sample injection for capillary electrophoresis on a micro fabricated device/on chip CE injection

Analytical Letters

Volumn 39, Issue 1, 2006, Pages 3-16

  Wenclawiak, Bernd W ^a   Püschl, René J ^a  

^a UNIVERSITY OF SIEGEN   (Germany)

Author keywords

CE; Injection; Lab on chip; Micro device; Micro total analysis system; Review

Indexed keywords

EID: 31144473667     PISSN: 00032719     EISSN: 1532236X     Source Type: Journal    
DOI: 10.1080/00032710500460932     Document Type: Short Survey

References (50)

1. Alarie, J.P., Jacobson, A.C., and Ramsey, J.M. 2001. Electrophoretic injection bias in a microchip va lving scheme. Electrophoresis, 22: 312-317.
2. Auroux, P.A., Iossifids, D., Reyes, D., and Manz, A. 2002. Micro total analysis systems. 2. Analytical standard operations and applications. Anal. Chem., 74: 2637-2652.
3. Backofen, U., Matysik, F.M., and Lunte, C.E. 2002. A chip-based electrophoresis system with electrochemical detection and hydrodynamic injection. Anal. Chem., 74: 4054-4059.
4. Bai, X., Josserand, J., Jensen, H., Rossier, J.S., and Girault, H.H. 2002. Finite element simulation of pinched pressure-driven flow injection in microchannels. Anal. Chem., 74: 6205-6215.
5. Bharadwaj, R., Santiago, J.G., and Mohammadi, B. 2002. Design and optimization of on chip capillary electrophoresis. Electrophores, 23: 2729-2744.
6. Cannon, D.M., Kuo, T.C., Bohn, P.W., and Sweedler, J.V. 2003. Nanocapillary array interconnects for gated analyte injections and electrophoretic separations in multilayer microfluidic architectures. Anal. Chem., 75: 2224-2230.
7. Cellar, N.A., Burns, S.T., Meiners, H., Chen, H., and Kennedy, R.T. 2005. Microfluidic Chip for Low-Row Push-Pull Perfusion Sampling in Vivo with On-Line Analysis if Amino acids. Anal. Chem., 77: 7067-7073.
8. Chen, G. and Wang, J. 2004. Fast and simple introduction for capillary electrophoresis microsystems. Analyst, 129: 507-511.
9. Cho, S.I., Lee, S., Chung, D.S., and Kim, Y. 2005. Bias-free pneumatic sample injection microchip electrophoresis. J. Chromatogr. A, 1063: 253-256[Taken from ACS on SciFinder (R)].
10. Crabtree, H.J., Cheong, E.C.S., Tilroe, D.A., and Backhouse, C.J. 2001. Microchip injection and separation anomalies due to pressure effects. Anal. Chem., 73: 4079-4086.
11. Deshpande, M., Greinner, K.B., West, J., Gilbert, J.R., Bousse, L., and Minalla, A. 2000. Novel Designs for Electrokinetic Injection in μTAS 339-342 in Micro Total Analysis Systems; Berg, A., van den, Olthuis, W. and Bergveld, P., eds.; Kluwer Academic Publishers: Dordrecht, Netherlands.
12. Dollnick, V., Liu, S.H., and Yovanovich, St.H. 2000. Capillary electrophoresis on micro chip. Electrophoresis, 21: 41-54.
13. Effenhauser, C.S., Manz, A., and Widmer, H.M. 1993. Glass chips for high-speed capillary electrophoresis separations with submicrometer plate heights. Anal. Chem., 65: 2637-2642.
14. Ermakov, S.V., Jacobson, S.C., and Ramsey, J.M. 2000. Computer simulations of electrokinetic injection techniques in microfluidic devices. Anal. Chem., 72: 3516-3517.
15. Fu, L.M., Yang, R.J., and Lee, G.B. 2003a. Electrokinetic focusing injection methods of microfluidic devices. Anal. Chem., 75: 1905-1910.
16. Fu, L.M. and Lin, C.H. 2003b. Numerical Analysis and Experimental Estimation of a Low-Leakage Injection Technique for Capillary Electrophoresis. Anal. Chem., 75: 5790-5796.
17. Fu, L.M. and Lin, C.H. 2004. High-resolution DNA separation in microcapillary electrophoresis chips utilizing double-L injection techniques. Electrophoresis, 25: 3652-3659.
18. Grover, W.H., Skelley, A.M., Chung, N.L., Lagally, E.T., and Mathies, R.A. 2003. Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devices. Sensors and Actuators B: Chemical, 89: 315-323.
19. Harrison, D.J., Manz, A., Fan, Z., Lüdig, H., and Widmer, H.M. 1992. Capillary electrophoresis and sample injection systems integrated on a planar glass chip. Anal. Chem., 64: 1926-1932.
20. Harrison, D.J., Fluri, K., Seiler, K., Fan, Z., Effenhauser, C.S., and Manz, A. 1993. Micromachining a miniaturized capillary electrophoresis based chemical analysis system on a chip. Science, 261: 895-897.
21. Huang, X., Gordon, M.J., and Zahre, R.N. 1988. Bias in quantitative capillary zone electrophoresis caused by electrokinetic sample injection. Anal. Chem., 60: 375-377.
22. Jacobson, St.C., Hergenröder, R., Koutny, L.B., Warmack, R.J., and Ramsey, J.M. 1994a. Effects of injection schemes and column geometry on the performance of microchip electrophoresis devices. Anal. Chem., 66: 1107-1113.
23. Jacobson, St.C., Koutny, L.B., Hergenröder, R., Moore, A.W., and Ramsey, J.M. 1994b. Microchip capillary electrophoresis with an integrated postcolumn reactor. Anal. Chem., 66: 3472-3476.
24. Jacobson, St.C., Hergenröder, R., Moore, A.W., Jr., and Ramsey, J.M. 1994c. Free column reactions with electrophoretic analysis integrated on a microchip. Anal. Chem., 66: 4127-4132.
25. Jacobson, S.C., Culbertson, C.T., Daler, J.E., and Ramsey, J.M. 1998. Microchip structures for submillisecond electrophoresis. Anal. Chem., 70: 3476-3480.
26. Jin, Y. and Luo, G.A. 2003. Numerical calculation of the electroosmotic flow at the cross region in microfluidic chips. Electrophoresis, 24: 1242-1252.
27. Kaji, N., Tezuka, Y., Takamara, M., Ueda, T., Nishimaoto, T., Horiike, Y., and Baba, Y. 2004. Separation of long DNA molecules by quartz nanopillar chips under a direct current electric field. Anal. Chem., 76: 15-22.
28. Karlinsey, J.M., Monahan, J., Marchiarullo, D.J., Ferrace, J.P., and Landers, J.P. 2005. Pressure injection on a valved microdevice for electrophoretic analysis of, of submicroliter, samples. Anal. Chem., 77: 3637-3643.
29. Lapos, J.A. and Ewing, A.G. 2000. Injection of fluorescently labeled analytes into micro fabricated chips using optically gated electrophoresis. Anal. Chem., 72: 4598-4602.
30. Lee, N.Y., Yamada, M., and Seki, M. 2004. Pressure-driven sample injection with quantitative liquid dispensing for on-chip electrophoresis. Anal. Sci., 20: 483-487.
31. Lee, N.Y., Yamada, M., and Seki, M. 2005. Control-free air vent system for ultra-low volume sample injection on a micro fabricated device. Anal. Sci., 21: 465-468.
32. Lin, C.C., Chen, C.E., Lin, C.E., and Chen, S.H. 2004a. Microchip electrophoresis with hydrodynamic injection and waste-removing function for quantitative analysis. J. Chromatogr. A, 1051: 69-74.
33. Lin, C.H., Yang, R.J., Tai, C.H., Lee, C.Y., and Fu, F.M. 2004b. Double-L injection technique for high performance capillary electrophoresis detection in microfluidic chips. J. Micromech. Microeng., 14: 630-646.
34. Lunte, C.E., Backofen, U., and Matysik, F. 2002. Chip electrophoresis: strategies for injection and detection. GIT Labor-Fachzeitschrift, 46: 1028-1030.
35. Lunte, C.E., Backofen, U., and Matysik, F. 2002. Chip electrophoresis: strategies for injection and detection. Bioforum, 25: 841-843.
36. Manz, A., Harrison, D.J., Verporte, E.M.J., Fettinger, J.C., Paulus, A., Lüdig, H., and Widmer, H.M. 1992. Planar chips technology for miniaturization and integration of separation techniques into monitoring systems: Capillary electrophoresis on a chip. J. Chromatogr., 593: 253-258.
37. Moning, C.A. and Jorgensen, J.W. 1991. On-column sample gating for high-speed capillary zone electrophoresis. Anal. Chem., : 802-807.
38. Pittmann, J.L., Trekhov, A.I., Suljak, S.W., and Gilman, S.D. 2003. Optically gated vacancy electrophoresis in microfluidic devices. Anal. Chim. Acta, 496: 195-204.
39. Schöening, M.J., Jacobs, M., Muck, A., Knobbe, D.I., Wang, J., Chatrathi, M., and Spillmann, S. 2005. Amperometric PDMS/glass capillary electrophoresis-based biosensor microchip for cathechol and dopamine detection. Sensors and Actuators, B: Chemical B, 108: 688-694.
40. Shultz-Lockyear, L.L., Colyer, C.L., Fan, Z.H., Roy, K.I., and Harrison, D.J. 1999. Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices. Electrophoresis, 20: 529-538.
41. Skelley, A.M., Scherer, J.R., Aubrey, A.D., Grover, W.H., Ivester, R.H., Ehrenfreund, P., Grunthaner, F.S., Bada, J.L., and Mathies, R.A. 2005. Development and evaluation of a microdevice for Amino acid biomarker detection and analysis on Mars. Proc. Natl. Acad. Sci. USA, 102: 1041-1046.
42. Slentz, B.E., Penner, N.A., and Regnier, F. 2002. Sampling BIAS at channel junctions in gated flow injection on chips. Anal Chem., 74: 4835-4840.
43. Studer, V., Hang, C., Pandolfi, A., Ortiz, M., Anderson, W.F., and Quake, S.R. 2004. Scaling properties of a low actuation pressure microfludic valve. J. Appl. Phys., 95: 393-398.
44. Su, R., Lin, J.M., Uchiyama, K., and Yamada, M. 2004. Integration of a flow-type chemiluminescence detector on a glass electrophoresis chip. Talanta, 64: 1024-1029.
45. Tsai, C.H., Yang, R.J., Tai, C.H., and Fu, L.M. 2005. Numerical simulation of electrokinetic injection techniques in capillary electrophoresis microchips. Electrophoresis, 26: 674-686.
46. Tsukagoshi, K., Suzuki, T., and Nakajima, R. 2002. Small-sized capillary electrophoresis with a chemiluminescence detector equipped with cross-intersection for sample injection. Anal. Sci., 18: 1279-1280.
47. Unger, M.A., Chou, H.P., Thorsen, T., Scherer, A., and Quake, S.R. 2000. Monolithic microfabricated valves and pumps by multilayer soft lithography. Science, 288: 113-116.
48. Vilkner, T., Janasek, D., and Manz, A. 2004. Micro total analysis systems. Recent Developments. Anal. Chem., 76: 3373-3386.
49. Wakida, S., Chiba, A., Takeda, S., Fukushi, K., and Matsuda, T. 2000. Microchip based capillary electrophoresis for environmental monitoring (1): study on pinched type sample injection of capillary electrophoresis using branched capillary. Chemical Sensors, Suppl. A., 16: 124-126[Taken from ACS on SciFinder (R)].
50. Yang, R.J., Fu, L.M., and Lee, G.B. 2002. Variable volume injection methods using electrokinetic focusing on microfluidic chips. J. Sep. Sci., 25: 996-1010.