Multifunctional periodic cellular metals

Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences

Volumn 364, Issue 1838, 2006, Pages 31-68

  Wadley, Haydn N G ^a  

^a University of Virginia   (United States)

Author keywords

Cellular materials; Cross flow heat exchange; Light metals; Sandwich panel structures; Stainless steel

Indexed keywords

EID: 31144440568     PISSN: 1364503X     EISSN: None     Source Type: Journal    
DOI: 10.1098/rsta.2005.1697     Document Type: Article

References (64)

1. Ashby, M. F., Evans, A. G., Fleck, N. A., Gibson, L. J., Hutchinson, J. W. & Wadley, H. N. G. 2000 Metal foams: a design guide, p. 45. Boston: Butterworth-Heinemann.
2. Baker, W. E. 1973 Explosions in air. Austin: University of Texas Press.
3. Bhattacharya, A., Calmidi, V. V. & Mahajan, R. L. 2002 Thermophysical properties of high porosity metal foams. Int. J. Heat Mass Transfer 45, 1017-1031. (doi:10.1016/S0017-9310(01)00220-4)
4. Bitzer, T. 1997 Honeycomb technology. London: Chapman & Hall.
5. Boger, T. & Heibel, A. K. 2005 Heat transfer in conductive monolith structures. Chem. Eng. Sci. 60, 1823-1835. (doi:10.1016/j.ces.2004.11.031)
6. Boomsa, K. & Poulikakos, D. 2001 On the effective thermal conductivity of a three-dimensionally structures fluid-saturated metal foam. Int. J. Heat Mass Transfer 44, 827-836. (doi:10.1016/S0017-9310(00)00123-X)
7. Brautsch, A., Griffin, T. & Schlegel. A. 2002 Heat transfer characterization of support structures for catalytic combustion. Int. J. Heat Mass Transfer 45, 3223-3231. (doi:10.1016/S0017-9310(02)00029-7)
8. Chiras, S., Mumm, D. R., Evans, A. G., Wicks, N., Hutchinson, J. W., Dharmasena, K., Wadley, H. N. G. & Fichter, S. 2002 The structural performance of near-optimized truss-core panels. Int. J. Solids Struct. 39, 4093-4115. (doi:10.1016/S0020-7683(02)00241-X)
9. Cochran, J., Lee, K. J., McDowell, D. & Sanders, T. H. 2000 Low density monolithic metal honeycombs by thermal chemical processing. In Fourth Conf., on Aerospace Materials, Processes, and Environmental Technology, Huntsville, Alabama, September 18-20.
10. Cote, F., Deshpande, V. S., Fleck, N. A. & Evans, A. G. In press. The compressive and shear responses of corrugated and diamond lattice materials. Int. J. Solids Struct.
11. ConWep blast simulation software, U.S. Army Corps of Engineers, Vicksburg, MS. Crump. S. 1992 U.S. Patent 5121329.
12. Dempsey, B. M., Eisele, S. & McDowell, D. L. 2005 Heat sink applications of extruded metal honeycombs. Int. J. Heat Mass Transfer 48, 527-535. (doi:10.1016/j.ijheatmasstransfer.2004.09.013)
13. Deshpande, V. S. & Fleck, N. A. 2001 Collapse of truss core beams in 3-point bending. Int. J. Solids Struct. 38, 6275-6305. (doi:10.1016/S0020-7683(01)00103-2)
14. Deshpande, V. S., Ashby, M. F. & Fleck, N. A. 2001 Foam topologies: bending vs stretch dominated architectures. Acta Mater. 49, 1035-1040. (doi:10.1016/S1359-6454(00)00379-7)
15. Despande, V. S. & Fleck, N. A., Blast Resistance of Clamped Sandwich Beams, ICTAM04.
16. Despande, V. S., Fleck, N. A. & Ashby, M. F. 2001 Effective properties of the octet-truss lattice material. J. Mech. Phys. Solids 49, 1747 1769. (doi:10.1016/S0022-5096(01)00010-2)
17. Dharmasena, K. P., Wadley, H. N. G., Xue, Z. & Hutchinson, J. W. Submitted. Mechanical response of metallic honeycomb sandwich panels to high intensity dynamic loading. Int. J. Impact Eng.
18. Evans, A. G., Hutchinson, J. W. & Ashby, M. F. 1999 Multifunctional of cellular metal systems. Prog. Mater. Sci. 43, 171-221. (doi:10.1016/S0079-6425(98)00004-8)
19. Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F. & Wadley, H. N. G. 2001 The topological design of multifunctional cellular metals. Prog. Mater. Sci. 46, 309-327. (doi:10.1016/S0079-6425(00)00016-5)
20. Fleck, N. A. & Deshpande, V. S. 2004 The resistance of clamped sandwich beams to shock loading. J. Appl. Mech. 71, 386-401. (doi:10.1115/1.1629109)
21. Fuller, R. B. 1961 US Patent 2986241.
22. Frank, K. 1981 U.S. Army Research Laboratory Technical Report ARBRL-MR-03097, "Armor-Penetrator Performance Measures".
23. Gama, B. A., Bogetti, T. A., Fink, B. K., Yu, C., Claar, T. D., Eifert, H. H. & Gillespie, J. W. 2001 Aluminum foam integral armor: a new dimension in armor design. Comp. Struct. 52, 381-395. (doi:10.1016/S0263-8223(01)00029-0)
24. Gere, J. M. & Timoshenko, S. P. 1984 Mechanics of materials. Boston: PWS Engineering.
25. Goldsmith, W. & Louie, D. L. 1995 Axial perforation of aluminum honeycombs by projectiles. Int. J. Solids Struct. 32, 1017-1046. (doi:10.1016/0020-7683(94)00188-3)
26. Gu, S., Lu, T. J. & Evans, A. G. 2001 On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity. Int. J. Heat Mass Transfer 44, 2163-2175. (doi:10.1016/S0017-9310(00)00234-9)
27. Hutchinson, J. W. & Xue, Z. 2005 Metal sandwich plates optimized for pressure impulses. Int. J. Mech. Sci. 47, 545-569. (doi:10.1016/j.ijmecsci.2004.10.012)
28. Hyun, S., Karlsson, A. M., Torquato, S. & Evans, A. G. 2003 Simulated properties of Kagome and tetragonal truss core panels. Int. J. Solids Struct. 40, 6989-6998. (doi:10.1016/S0020-7683(03)00350-0)
29. Kim, T., Zhao, C. Y., Lu, T. J. & Hodson, H. P. 2004a Convective heat dissipation with lattice-frame materials, mechanics of materials. Mech. Mater. 36, 767-780. (doi:10.1016/j.mechmat.2003.07.001)
30. Kim, T., Hodson, H. P. & Lu, T. J. 2004b Fluid-flow and end wall heat-transfer characteristics of an ultralight lattice-frame material. Int. J. Heat Mass Transfer 47, 1129-1140. (doi:10.1016/j.ijheatmasstransfer.2003.10.012)
31. Kim, T., Hodson, H. P. & Lu, T. J. 2005 Contributions of vortex structures and flow separation to local and overall pressure and heat transfer characteristics in an ultralight weight lattice material. Int. J. Heat Mass Transfer 48, 4243-4264. (doi:10.1016/j.ijheatmasstransfer.2005.04.026)
32. Kooistra, G. W. & Wadley, H. N. G. In press. Lattice truss structures from expanded metal sheet. J. Mater. Design.
33. Kooistra, G. W., Deshpande, V. S. & Wadley, H. N. G. 2004 Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium. Acta Mater. 52, 4229-4237. (doi:10.1016/j.actamat.2004.05.039)
34. Kooistra, G. W., Deshpande, V. S. & Wadley, H. N. G. Submitted. Hierarchical corrugated core sandwich panel concepts. J. Appl. Mech.
35. Lu, T. J. 1999 Heat transfer efficiency of metal honeycombs. Int. J. Heat Mass Transfer 42, 2031-2040. (doi:10.1016/80017-9310(98)00306-8)
36. Lu, T. J., Valdevit, L. & Evans, A. G. 2005 Active cooling by metallic sandwich structures with periodic cores. Prog. Mater. Sci. 50, 789-815. (doi:10.1016/j.pmatsci.2005.03.001)
37. Phanikumar, M. S. & Mahajan, R. L. 2002 Non-darcy natural convection in high porosity metal foams. Int. J. Heat Mass Transfer 45, 3781-3793. (doi:10.1016/S0017-9310(02)00089-3)
38. Qiu, X., Deshpande, V. S. & Fleck, N. A. 2004 Dynamic response of a clamped circular sandwich plate subject to shock loading. J. Appl. Mech. 71, 637-645. (doi:10.1115/1.1778416)
39. Queheillalt, D. T. & Wadley, H. N. G. 2005a Cellular material lattices with hollow trusses. Acta Mater. 53, 303-313. (doi:10.1016/j.actamat.2004.09.024)
40. Queheillalt, D. T. & Wadley, H. N. G. 2005b Pyramidal lattice structures with hollow trusses. Mater. Sci. Eng. A 397, 132-137. (doi:10.1016/j.msea.2005.02.048)
41. Queheillalt, D. T., Deshpande, V. S. & Wadley, H. N. G. Submitted. Truss waviness effects in cellular lattice structures. Mater. Sci. Eng. A.
42. Rathbun, H. J., Wei, Z., He, M. Y., Zok, F. W., Evans, A. G., Sypeck, D. J. & Wadley, H. N. G. 2004 Measurement and simulation of the performance of a lightweight metallic sandwich structure with a tetrahedral truss core. J. Appl. Mech. Trans. ASME 71, 368-374.
43. Rathbun, H. J. et al. In press. Performance of metallic honeycomb-core sandwich beams under shock loading. Int. J. Solids Struct.
44. Royal Schelde Shipbuilding, P.O. Box, 16 4380 AA Vlissingen, The Netherlands.
45. Singh, R. &: Kasana, H. S. 2004 Computational aspects of effective thermal conductivity of highly porous metal foams. Appl. Thermal Eng. 24, 1841-1849. (doi:10.1016/j.applthermaleng.2003.12.011)
46. Sypeck, D. J. & Wadley. H. N. G. 2001 Multifunctional microtruss laminates: textile synthesis and properties. J. Mater. Res. 16, 890-897.
47. Sypeck, D. J. & Wadley, H. N. G. 2002 Cellular metal truss core sandwich structures. Adv. Eng. Mater. 4, 759-764. (doi:10.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO;2-A)
48. Tian, J., Kim, T., Lu, T. J., Hodson, H. P., Queheillalt, D. T., Sypeck, D. J. & Wadley, H. N. G. 2004a The effects of topology on fluid-flow and heat-transfer within cellular copper structures. Int. J. Heat Mass Transfer 47, 3171-3186. (doi:10.1016/j.ijheatmasstransfer.2004.02.010)
49. Tian, J., Lu, T. J., Hodson, H. P., Queheillalt, D. T. & Wadley, H. N. G. 2004b Thermal-hydraulic performance of sandwich structures with wire mesh core and embedded heat pipes. 13th Int. Heat Pipe Conf. (13th IHPC) Shanghai, China.
50. Tronconi, E., Groppi, G., Boger, T. & Heibel, A. 2004 Monolithic catalysts with high conductivity honeycomb supports for gas/solid exothermic reactions: characterization of the heat-transfer properties. Chem. Eng. Sci. 59, 4941-4949. (doi:10.1016/j.ces.2004.07.018)
51. Valdevit, L., Hutchinson, J. W. &: Evans, A. G. 2004 Structurally optimized sandwich panels with prismatic cores. Int. J. Solids Struct. 41, 5105-5124. (doi:10.1016/j.ijsolstr.2004.04.027)
52. Wadley, H. N. G., Fleck, N. A. & Evans, A. G. 2003 Fabrication and structural performance of periodic cellular metal sandwich structures. Comp. Sci. Technol. 63, 2331-2343. (doi:10.1016/S0266-3538(03)00266-5)
53. Wallach, J. C. & Gibson, L. J. 2001 Mechanical behavior of a three-dimensional truss material. Int. J. Solids Struct. 38, 7181-7196. (doi:10.1016/S0020-7683(00)00400-5)
54. Wang, J., Evans, A. G., Dharmasena, K. & Wadley, H. N. G. 2003 On the performance of truss panels with Kagome cores. Int. J. Solids Struct. 40, 6981-6988. (doi:10.1016/S0020-7683(03)00349-4)
55. Wicks, N. & Hutchinson, J. W. 2001 Optimal truss plates. Int. J. Solids Struct. 38, 5165-5183. (doi:10.1016/S0020-7683(00)00315-2)
56. Wicks, N. &: Hutchinson, J. W. 2004 Performance of sandwich plates with truss cores. Mech. Mater. 36, 739-751. (doi:10.1016/j.mechmat.2003.05.003)
57. Xue, Z. & Hutchinson, J. W. 2003 Preliminary assessment of sandwich plates subject to blast loads. Int. J. Mech. Sci. 45, 687-705. (doi:10.1016/S0020-7403(03)00108-5)
58. Xue, Z. &: Hutchinson, J. W. 2004 A comparative study of impulse-resistant metal sandwich plates. Int. J. Impact Eng. 30, 1283-1305. (doi:10.1016/j.ijimpeng.2003.08.007)
59. Yeh, C. L., Chen, Y. F., Wen, C. Y. & Li, K. T. 2003 Measurement of thermal contact resistance of aluminum honeycombs. Exp. Thermal Fluid Sci. 27, 271-281. (doi:10.1016/S0894-1777(02)00297-2)
60. Yungwith, C., Radford, D. & Wadley, H. N. G. Submitted. Ballistic impact response of hybrid pyramidal lattice truss structures, J. Comp. A.
61. Zhang, J. & Ashby, M. F. 1992 The out-of-plane properties of honeycombs. Int. J. Mech. Sci. 34, 475-489. (doi:10.1016/0020-7403(92)90013-7)
62. Zhao, C. Y., Lu, T. J., Hodson, H. P. & Jackson, J. D. 2004 The temperature dependence of effective thermal conductivity of open-cell steel alloy foams. Mater. Sci. Eng. A 367, 123-131. (doi:10.1016/j.msea.2003.10.241)
63. Zok, F. W., Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M. & Evans, A. G. 2004 A protocol for characterizing the structural performance of metallic sandwich panels: application to pyramidal truss cores. Int. J. Solids Struct. 41, 6249-6271, (doi:10.1016/j.ijsolstr.2004.05.045)
64. Zupan, M., Deshpande, V. S. & Fleck, N. A. 2004 The out-of-plane compressive behaviour of woven-core sandwich plates. Eur. J. Mech. A Solids 23, 411-421.