-
1
-
-
0037011040
-
Correlation between Residual Stresses and Adhesion of Plasma Spayed Coatings: Effects of a Post-Annealing Treatment
-
C. Godoy, E.A. Souza, M.M. Lima, and J.C.A. Batista, Correlation between Residual Stresses and Adhesion of Plasma Spayed Coatings: Effects of a Post-Annealing Treatment, Thin Solid Films, 2002, Vol 420-421, p 438-445
-
(2002)
Thin Solid Films
, vol.420-421
, pp. 438-445
-
-
Godoy, C.1
Souza, E.A.2
Lima, M.M.3
Batista, J.C.A.4
-
2
-
-
0037461445
-
Effect of Residual Stresses on Air Plasma Sprayed Thermal Barrier Coatings
-
A. Nusair Khan, J. Lu, and H. Liao, Effect of Residual Stresses on Air Plasma Sprayed Thermal Barrier Coatings, Surf Coat. Technol., Vol 168 (No. 2-3), 2003, p 291-299
-
(2003)
Surf Coat. Technol.
, vol.168
, Issue.2-3
, pp. 291-299
-
-
Nusair Khan, A.1
Lu, J.2
Liao, H.3
-
3
-
-
8644254859
-
Residual Stresses in Thick and Thin Surface Coatings
-
P.J. Withers, Ed., Elsevier Science, London, UK, Section 4.1
-
T.W. Clyne, Residual Stresses in Thick and Thin Surface Coatings, Encyclopedia of Materials Science and Technology - Elasticity and Residual Stresses, P.J. Withers, Ed., Elsevier Science, London, UK, 2001, Section 4.1.
-
(2001)
Encyclopedia of Materials Science and Technology - Elasticity and Residual Stresses
-
-
Clyne, T.W.1
-
4
-
-
0030408924
-
Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work
-
T.W. Clyne and S.C. Gill, Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work, J. Therm. Spray Technol., Vol 5 (No. 4), 1996, p 401-418
-
(1996)
J. Therm. Spray Technol.
, vol.5
, Issue.4
, pp. 401-418
-
-
Clyne, T.W.1
Gill, S.C.2
-
5
-
-
0026154370
-
The Quenching Stress in Thermally Sprayed Coatings
-
S. Kuroda and T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, Vol 200, 1991, p 49-66
-
(1991)
Thin Solid Films
, vol.200
, pp. 49-66
-
-
Kuroda, S.1
Clyne, T.W.2
-
6
-
-
0040703369
-
Stress Determination for Coatings
-
ASM Handbook, ASM International
-
J.A. Sue and G.S. Schajer, Stress Determination for Coatings, Surface Engineering, Vol 5, ASM Handbook, ASM International, 1994, p 647-653
-
(1994)
Surface Engineering
, vol.5
, pp. 647-653
-
-
Sue, J.A.1
Schajer, G.S.2
-
7
-
-
13844277147
-
A Review of Residual Stress Measurement Methods
-
NPL, Report MATC (A) 04, National Physical Laboratory, UK
-
F.A. Kandil, J.D. Lord, A.T. Fry, and P.V. Grant, A Review of Residual Stress Measurement Methods, A Guide to Technique Selection, NPL, Report MATC (A) 04, National Physical Laboratory, UK, 2001
-
(2001)
A Guide to Technique Selection
-
-
Kandil, F.A.1
Lord, J.D.2
Fry, A.T.3
Grant, P.V.4
-
8
-
-
0034923107
-
Residual Stress, Measurement Techniques
-
P.J. Withers and H.K.D.H. Bhadeshia, Residual Stress, Measurement Techniques, Mater. Sci Technol., Vol 17 (No. 4), 2001, p 355-365
-
(2001)
Mater. Sci Technol.
, vol.17
, Issue.4
, pp. 355-365
-
-
Withers, P.J.1
Bhadeshia, H.K.D.H.2
-
9
-
-
0343168029
-
Analysis of Residual Stresses in Thermal Barrier Coatings
-
V. Teixeira, M. Andritschky, W. Fischer, H.P. Buchkremer, and D. Stover, Analysis of Residual Stresses in Thermal Barrier Coatings, J. Mater. Proc. Technol., Vol 92-93, 1999, p 209-216
-
(1999)
J. Mater. Proc. Technol.
, vol.92-93
, pp. 209-216
-
-
Teixeira, V.1
Andritschky, M.2
Fischer, W.3
Buchkremer, H.P.4
Stover, D.5
-
10
-
-
0006156503
-
Evaluation of Residual Stresses in Alumina Coating by Neutron Diffraction and the Incremental Holedrilling Method
-
MAT-TEC'96, J. Lu, Ed., IITT, Gournay sur Marne, France
-
B. Elhamdi, J. Lu, and A. Lodini, Evaluation of Residual Stresses in Alumina Coating by Neutron Diffraction and the Incremental Holedrilling Method, MAT-TEC'96, J. Lu, Ed., IITT, Gournay sur Marne, France, 1996, p 89-98
-
(1996)
, pp. 89-98
-
-
Elhamdi, B.1
Lu, J.2
Lodini, A.3
-
11
-
-
0037713319
-
Metallurgical Characterization and Determination of Residual Stresses of Coatings Formed by Thermal Spraying
-
M. Laribi, A.B. Vannes, N. Mesrati, and D. Treheux, Metallurgical Characterization and Determination of Residual Stresses of Coatings Formed by Thermal Spraying, J. Therm. Spray Technol., Vol 12 (No. 2), 2003, p 234-239
-
(2003)
J. Therm. Spray Technol.
, vol.12
, Issue.2
, pp. 234-239
-
-
Laribi, M.1
Vannes, A.B.2
Mesrati, N.3
Treheux, D.4
-
12
-
-
0043268738
-
Residual Stress in Plasma-Sprayed Hydroxyapatite Coating Measured by the Material Removal Method
-
Y.C. Yang and E. Chang, Residual Stress in Plasma-Sprayed Hydroxyapatite Coating Measured by the Material Removal Method, J. Mater. Sci. Lett., Vol 22 (No. 13), 2003, p 919-922
-
(2003)
J. Mater. Sci. Lett.
, vol.22
, Issue.13
, pp. 919-922
-
-
Yang, Y.C.1
Chang, E.2
-
13
-
-
0037423039
-
In Situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings. Part 1: Apparatus and Analysis
-
J. Matejicek and S. Sampath, In Situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings. Part 1: Apparatus and Analysis, Acta Mater., Vol 51 (No. 3), 2003, p 863-872
-
(2003)
Acta Mater.
, vol.51
, Issue.3
, pp. 863-872
-
-
Matejicek, J.1
Sampath, S.2
-
14
-
-
0037423035
-
In Situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings. Part 2: Processing Effects on Properties of Mo Coatings
-
J. Matejicek, S. Sampath, D. Gilmore, and R. Neiser, In Situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings. Part 2: Processing Effects on Properties of Mo Coatings, Acta Mater., Vol 51 (No. 3), 2003, p 873-885
-
(2003)
Acta Mater.
, vol.51
, Issue.3
, pp. 873-885
-
-
Matejicek, J.1
Sampath, S.2
Gilmore, D.3
Neiser, R.4
-
15
-
-
30544441517
-
Experimental Determination of Residual Stresses in Materials Elaborated by Thermal Spraying
-
(Paris, France)
-
M. Laribi, N. Mesrati, M. Laracine, A.B. Vannes, and D. Treheux, Experimental Determination of Residual Stresses in Materials Elaborated by Thermal Spraying, Mater. Tech. (Paris, France), Vol 89 (No. 9-10), 2001, p 15-21
-
(2001)
Mater. Tech.
, vol.89
, Issue.9-10
, pp. 15-21
-
-
Laribi, M.1
Mesrati, N.2
Laracine, M.3
Vannes, A.B.4
Treheux, D.5
-
16
-
-
0028737159
-
Through-Thickness Residual Stress Evaluations for Several Industrial Thermal Spray Coatings Using a Modified Layer Removal Method
-
D.J. Greving, E.F. Rybicki, and J.R. Shadley, Through-Thickness Residual Stress Evaluations for Several Industrial Thermal Spray Coatings Using a Modified Layer Removal Method, J. Therm. Spray Technol., Vol 3 (No. 4), 1994, p 379-388
-
(1994)
J. Therm. Spray Technol.
, vol.3
, Issue.4
, pp. 379-388
-
-
Greving, D.J.1
Rybicki, E.F.2
Shadley, J.R.3
-
17
-
-
0033666043
-
Residual Stresses in As-Sprayed and Heat Treated TBCs. Measurements and FEM Calculations
-
M.F.J. Koolloos and J.M. Houben, Residual Stresses in As-Sprayed and Heat Treated TBCs. Measurements and FEM Calculations, Mater. Sci. Forum, Vol 347-349, 2000, p 465-470
-
(2000)
Mater. Sci. Forum
, vol.347-349
, pp. 465-470
-
-
Koolloos, M.F.J.1
Houben, J.M.2
-
18
-
-
1442305833
-
3 8% wt) Coatings
-
C. Coddet, Ed., May 25-29, Nice, France, ASM International
-
3 8% wt) Coatings, Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, Ed., May 25-29, 1998, Nice, France, ASM International, p 1623-1627
-
(1998)
Thermal Spray: Meeting the Challenges of the 21st Century
, pp. 1623-1627
-
-
Baradel, N.1
Bianchi, L.2
Blein, F.3
Freslon, A.4
Jeandin, M.5
Ceretti, M.6
Lu, J.7
-
19
-
-
34250509148
-
Hole Drilling Method of Measuring Residual Stresses
-
N.J. Rendler and I. Vigness, Hole Drilling Method of Measuring Residual Stresses, Exp. Mech., Vol 6 (No. 12), 1966, p 577-586
-
(1966)
Exp. Mech.
, vol.6
, Issue.12
, pp. 577-586
-
-
Rendler, N.J.1
Vigness, I.2
-
20
-
-
30744469085
-
-
note
-
Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature, ASTM C1161-02c, ASTM International, West Conshohocken, PA
-
-
-
-
21
-
-
0019556210
-
Application of Finite Element Calculation to Residual Stress Measurement
-
G.S. Schajer, Application of Finite Element Calculation to Residual Stress Measurement, J. Eng. Mater. Technol., Vol 103, 1981, p 157-163
-
(1981)
J. Eng. Mater. Technol.
, vol.103
, pp. 157-163
-
-
Schajer, G.S.1
-
22
-
-
0024089987
-
Measurement of Non Uniform Residual Stress Using the Hole Drilling Method
-
part 2: 345-349
-
G.S. Schajer, Measurement of Non Uniform Residual Stress Using the Hole Drilling Method, J. Eng. Mater. Technol., Vol 110 (No. 4), 1988, Part 1: 338-343, part 2: 345-349
-
(1988)
J. Eng. Mater. Technol.
, vol.110
, Issue.4 PART 1
, pp. 338-343
-
-
Schajer, G.S.1
-
23
-
-
0029770918
-
Stress Calculation Error Analysis for Incremental Hole Drilling Residual Stress Measurement
-
G.S. Schajer and E. Altus, Stress Calculation Error Analysis for Incremental Hole Drilling Residual Stress Measurement, J. Eng. Mater. Technol., Vol 118 (No. 1), 1996, p 120-126
-
(1996)
J. Eng. Mater. Technol.
, vol.118
, Issue.1
, pp. 120-126
-
-
Schajer, G.S.1
Altus, E.2
-
24
-
-
0027539411
-
Use of Displacement Data to Calculate Strain Gauge Response in Non Uniform Stress Field
-
G.S. Schajer, Use of Displacement Data to Calculate Strain Gauge Response in Non Uniform Stress Field, Strain, Vol 29 (No. 1), 1993, p 9-13
-
(1993)
Strain
, vol.29
, Issue.1
, pp. 9-13
-
-
Schajer, G.S.1
-
25
-
-
0032790532
-
Optimal Calculation Steps for the Evaluation of Residual Stress by the Incremental Hole Drilling Technique
-
A. Zuccarello, Optimal Calculation Steps for the Evaluation of Residual Stress by the Incremental Hole Drilling Technique, Exp. Mach., Vol 2, 1999, p 117-124
-
(1999)
Exp. Mech.
, vol.2
, pp. 117-124
-
-
Zuccarello, A.1
-
26
-
-
0030855572
-
Residual Stress Evaluation by the Hole Drilling Method with Off-Centre Hole: An Extension of the Integral Method
-
D. Vangi, Residual Stress Evaluation by the Hole Drilling Method with Off-Centre Hole: An Extension of the Integral Method, J. Eng. Mater. Technol., Vol 119, 1997, p 79-85
-
(1997)
J. Eng. Mater. Technol.
, vol.119
, pp. 79-85
-
-
Vangi, D.1
-
27
-
-
0019912075
-
Brief Investigation of Induced Drilling Stresses in the Center-Hole Method of Residual Stress Measurement
-
M.T. Flaman, Brief Investigation of Induced Drilling Stresses in the Center-Hole Method of Residual Stress Measurement, Exp. Mech., Vol 22, 1982, p 26-30
-
(1982)
Exp. Mech.
, vol.22
, pp. 26-30
-
-
Flaman, M.T.1
-
28
-
-
0020167036
-
On the Correction of Residual Stress Measurements Obtained Using the Center Hole Method
-
A.A. Scaramangas, R.F.D. Porter Goff, and R.H. Leggatt, On the Correction of Residual Stress Measurements Obtained Using the Center Hole Method, Strain, Vol 18, 1982, p 88-97
-
(1982)
Strain
, vol.18
, pp. 88-97
-
-
Scaramangas, A.A.1
Porter Goff, R.F.D.2
Leggatt, R.H.3
-
29
-
-
84970522360
-
Measurement of Residual Stresses by the Hole-Drilling Method: Influence of Hole Eccentricity
-
A. Ajovalasit, Measurement of Residual Stresses by the Hole-Drilling Method: Influence of Hole Eccentricity, J. Strain Anal., Vol 14, 1979, p 171-178
-
(1979)
J. Strain Anal.
, vol.14
, pp. 171-178
-
-
Ajovalasit, A.1
-
30
-
-
0028524254
-
Data Management for the Evaluation of Residual Stresses by the Incremental Hole Drilling Method
-
D. Vangi, Data Management for the Evaluation of Residual Stresses by the Incremental Hole Drilling Method, J. Eng. Mater. Technol., Vol 116 (No. 4), 1994, p 561-566
-
(1994)
J. Eng. Mater. Technol.
, vol.116
, Issue.4
, pp. 561-566
-
-
Vangi, D.1
-
31
-
-
13244272184
-
Finite Element Analysis of Residual Stress in Plasma-Sprayed Ceramic Coatings
-
T. Valente, C. Bartuli, M. Sebastiani, and F. Casadei, Finite Element Analysis of Residual Stress in Plasma-Sprayed Ceramic Coatings, Proc. Inst. Mech. Eng., Vol 218 Part L: J. Materials: Design and Applications, 2004, p 321-330
-
(2004)
Proc. Inst. Mech. Eng., Vol 218 Part L: J. Materials: Design and Applications
, vol.218
, pp. 321-330
-
-
Valente, T.1
Bartuli, C.2
Sebastiani, M.3
Casadei, F.4
|