Interlaminar stress concentrations in layered structures: Part I - A selective literature survey on the free-edge effect since 1967

Journal of Composite Materials

Volumn 38, Issue 12, 2004, Pages 1037-1062

  Mittelstedt, Christian ^a   Becker, Wilfried ^a  

^a UNIVERSITY OF SIEGEN   (Germany)

Author keywords

Free corner effect; Free edge effect; Interlaminar stresses; Laminates; Literature survey

Indexed keywords

ELASTICITY; FINITE ELEMENT METHOD; KINEMATICS; MATHEMATICAL MODELS; SHEAR STRESS; STRESS CONCENTRATION;

FREE CORNER EFFECT; FREE EDGE EFFECT; INTERLAMINAR STRESSES; LAYERED STRUCTURES;

LAMINATED COMPOSITES;

EID: 3042693912     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/0021998304040566     Document Type: Article

References (136)

1. Jones, R.M. (1975). Mechanics of Composite Materials, Scripta Book Co., Washington.
2. Tsai, S.W. and Hahn, H.T. (1980). Introduction to Composite Materials, Technomic Publishing Co., Inc., Lancaster et al.
3. Pipes, R.B. and Pagano, N.J. (1970). Interlaminar Stresses in Composite Laminates under Uniform Axial Extension, Journal of Composite Materials, 4: 538-548.
4. Pipes, R.B. and Daniel, I.M. (1971). Moire Analysis of the Interlaminar Shear Edge Effect in Laminated Composites, Journal of Composite Materials, 5: 255-259.
5. Herakovich, C.T., Post, D., Buczek, M.B. and Czarnek, R. (1985). Free Edge Strain Concentrations in Real Composite Laminates: Experimental-Theoretical Correlation, Journal of Applied Mechanics, 52: 787-793.
6. Herakovich, C.T. (1989), Free Edge Effects in Laminated Composites, In: Herakovich, C.T. and Tarnopol'skii, Y.M. (eds), Handbook of Composites, Structure and Design, Vol. 2, pp. 187-230, Elsevier Science Publishers B.V., Amsterdam.
7. Hayashi, T. (1967). Analytical Study of Interlaminar Shear Stresses in a Laminated Composite Plate, Transaction of Japan Society for Aeronautical Engineering and Space Science, 10: 43-48.
8. Puppo, A.H. and Evensen, H.A. (1970). Interlaminar Shear in Laminated Composites under Generalized Plane Stress, Journal of Composite Materials, 4: 204-220.
9. Pagano, N.J. and Pipes, R.B. (1971). The Influence of Stacking Sequence on Laminate Strength, Journal of Composite Materials, 5: 50-57.
10. Pagano, N.J. and Pipes, R.B. (1973). Some Observations on the Interlaminar Strength of Composite Laminates, International Journal of Mechanical Science, 15: 679-688.
11. Conti, P. and De Paulis, A. (1985). A Simple Model to Simulate the Interlaminar Stresses Generated Near the Free Edge of a Composite Laminate. Delamination and Debonding of Materials, In: Johnson, W.S. (ed.), ASTM STP, Vol. 876, pp. 35-51, American Society for Testing and Materials, Philadelphia.
12. Whitney, J.M. (1973). Free-edge Effects in the Characterization of Composite Materials, ASTM STP, Vol. 521, pp. 167-180, American Society for Testing and Materials, Philadelphia.
13. Pipes, R.B. and Pagano, N.J. (1974). Interlaminar Stresses in Composite Laminates - An Approximate Elasticity Solution, Journal of Applied Mechanics, 41: 668-672.
14. Pagano, N.J. (1974). On the Calculation of Interlaminar Normal Stress in Composite Laminate, Journal of Composite Materials, 8: 65-81.
15. Tang, S. (1975). A Boundary Layer Theory - Part I: Laminated Composites in Plane Stress, Journal of Composite Materials, 9: 33-41.
16. Tang. S. and Levy, A. (1975). A Boundary Layer Theory - Part II: Extension of Laminated Finite Strip, Journal of Composite Materials, 9: 42-52.
17. Hsu, P.W. and Herakovich, C.T. (1977). A Perturbation Solution for Interlaminar Stresses in Bidirectional Laminates, Composite Materials: Testing and Design (Fourth Conference), ASTM STP 617, pp. 296-316, American Society for Testing and Materials, Philadelphia.
18. Hsu, P.W. and Herakovich, C.T. (1977). Edge Effects in Angle-Ply Composite Laminates, Journal of Composite Materials, 11: 422-428.
19. Wang, J.T.S. and Dickson, J.N. (1978). Interlaminar Stresses in Symmetric Composite Laminates, Journal of Composite Materials, 12: 390-402.
20. Bar-Yoseph, P. and Pian, T.H.H. (1981). Calculation of Interlaminar Stress Concentration in Composite Laminates, Journal of Composite Materials, 15: 225-239.
21. Bar-Yoseph, P. (1983). On the Accuracy of Interlaminar Stress Calculation in Laminated Plates, Computer Methods in Applied Mechanics and Engineering, 36: 309-329.
22. Pagano, N.J. and Soni, S.R. (1983). Global-Local Laminate Variational Model, International Journal of Solids and Structures, 3: 207-228.
23. Soni, S.R. and Pagano, N.J. (1983). Elastic Response of Composite Laminates, In: Hashin, Z. and Herakovich, C.T. (eds), Mechanics of Composite Materials - Recent Advances, pp. 227-242, Pergamon Press, New York.
24. Pagano, N.J. (1978). Stress Fields in Composite Laminates, International Journal of Solids and Structures 14: 385-400.
25. Pagano, N.J. (1978). Free Edge Stress Fields in Composite Laminates, International Journal of Solids and Structures. 14: 401-406.
26. Whitney, J.M. and Sun, C.T. (1973). A Higher Order Theory for Extensional Motion of Laminated Composites, Journal of Sound and Vibration, 30: 85-97.
27. Soni, S.R. (1982), Stress and Strength Analysis of Composite Laminates at Delamination, Progress in Science and Engineering of Composites, In: Proceedings of the International Conference on Composite Materials, pp. 251-260, Tokyo.
28. Valisetty, R.R. and Rehfield, L.W. (1985). A New Ply Model for Interlaminar Stress Analysis, In: Johnson, W.S. (ed.), Delamination and Debonding of Materials, ASTM STP 876, pp. 52-68, American Society for Testing and Materials, Philadelphia.
29. Kassapoglou, C. and Lagace, P.A. (1986). An Efficient Method for the Calculation of Interlaminar Stresses in Composite Materials, Journal of Applied Mechanics, 53: 744-750.
30. Kassapoglou, C. and Lagace, P.A. (1987). Closed Form Solutions for the Interlaminar Stress Field in Angle-Ply and Cross-Ply Laminates, Journal of Composite Materials, 21: 292-308.
31. rd-5th 1989 - A Collection of Technical Papers.
32. Webber, J.P.H. and Morton, S.K. (1993). An Analytical Solution for the Thermal Stresses at the Free Edges of Laminated Plates, Composites Science and Technology, 46: 175-185.
33. Morton, S.K. and Webber, J.P.H. (1993). Interlaminar Failure due to Mechanical and Thermal Stresses at the Free Edges of Laminated Plates, Composites Science and Technology, 47: 1-13.
34. Rose, C.A. and Herakovich, C.T. (1993). An Approximate Solution for Interlaminar Stresses in Composite Laminates, Composites Engineering, 3: 271-285.
35. Lin, C.-C., Hsu, C.-Y. and Ko, C.-C. (1995). Interlaminar Stresses in General Laminates with Straight Free Edges, AIAA Journal, 33: 1471-1476.
36. Stiftinger, M.A. (1996). Semi-Analytical Finite Element Formulations for Layered Composite Shells with Consideration of Edge Effects, Dissertation Thesis, University of Vienna, Austria, published in: Fortschritt-Berichte VDI, Issue 18, No. 203, VDI Publishing House Düsseldorf, Germany.
37. Amrutharaj, G.S., Lam, K.Y. and Cotterell, B. (1996). Delaminations at the Free Edge of a Composite Laminate, Composites: Part B, 27B: 475-483.
38. Krishna Murty, A.V. and Hari Kumar, H.K. (1989). Modelling of Symmetric Laminates under Extension, Composite Structures, 11: 15-32.
39. Kassapoglou, C. (1990). Determination of Interlaminar Stresses in Composite Laminates under Combined Loads, Journal of Reinforced Plastics and Composites, 9: 33-58.
40. Becker, W. (1993). Beiträge zur analytischen Behandlung ebener Laminate (in german), Habilitation Thesis, published in: Fortschritt-Berichte VDI, Issue 18, No. 121, VDI Publishing House Düsseldorf, Germany.
41. Becker, W. (1993). Closed-Form Solution for the Free-Edge Effect in Cross-Ply Laminates, Composite Structures, 26: 39-45.
42. Becker, W. (1994). Closed-Form Analysis of the Free Edge Effect in Angle-Ply Laminates, Journal of Applied Mechanics, 61: 209-211.
43. Becker, W. and Kress, G. (1994). Stiffness Reduction in Laminate Coupons due to the Free-Edge Effect, Composites Science and Technology, 52: 109-115.
44. Kress, G. and Becker, W. (1995). Effective Tensile Stiffness of Finite-Width Quasi-Isotropic Laminates, Journal of Reinforced Plastics and Composites, 14: 1043-1053.
45. Bhat, A.V. and Lagace, P.A. (1994). An Analytical Method for the Evaluation of Interlaminar Stresses Due to Material Discontinuities, Journal of Composite Materials, 28: 190-210.
46. Yin, W.-L. (1994). Free-Edge Effects in Anisotropic Laminates Under Extension, Bending and Twisting, Part I: A Stress-Function-Based Variational Approach, Journal of Applied Mechanics, 61: 410-415.
47. Yin, W.-L. (1994). Free-Edge Effects in Anisotropic Laminates Under Extension, Bending and Twisting, Part II: Eigenfunction Analysis and the Results for Symmetric Laminates, Journal of Applied Mechanics, 61: 416-421.
48. Lekhnitskii, S.G. (1963). Theory of Elasticity of an Anisotropic Body, Holden-Day Inc., San Francisco.
49. Yin, W.-L. (1997). The Effect of Temperature Gradient on the Free-Edge Interlaminar Stresses in Multi-Layered Structures, Journal of Composite Materials, 31: 2460-2477.
50. Yin, W.-L. (1994). Simple Solutions of the Free-Edge Stresses in Composite Laminates under Thermal and Mechanical Loads, Journal of Composite Materials, 28: 573-586.
51. Kim, T. and Atluri, S.N. (1995). Analysis of Edge Stresses in Composite Laminates under Combined Thermo-Mechanical Loading, Using a Complementary Energy Approach, Computational Mechanics. 16: 83-97.
52. Zhang, C. and Yeh, H.-Y. (1998). A Variational Approach for Straight Edge Effect Stresses in Laminated Composites, Composite Structures, 43: 243-254.
53. Zhu, C. and Lam, Y.C. (1998). A Rayleigh-Ritz Solution for Local Stresses in Composite Laminates, Composites Science and Technology, 58: 447-461.
54. Tahani, M. and Nosier, A. (2003). Free Edge Stress Analysis of General Cross-Ply Composite Laminates Under Extension and Thermal Loading, Composite Structures, 60: 91-103.
55. Nosier, A., Kapania, R.K. and Reddy, J.N. (1993). Free Vibration Analysis of Laminated Plates Using a Layerwise Theory, AIAA Journal, 31: 2335-2346.
56. Altus, E., Rotem, A. and Shmueli, M. (1980). Free Edge Effect in Angle Ply Laminates - A New Three Dimensional Finite Difference Solution, Journal of Composite Materials, 14: 21-30.
57. Pipes, R.B. (1980). Boundary Layer Effects in Composite Laminates, Fibre Science and Technology, 13: 49-71.
58. Hong, C.S. and Kim, K.S. (1982). An Analysis of Free-Edge Delamination in Laminated Composite under Uniform Axial Strain, Progress in Science and Engineering of Composites, In: Proceedings of the International Conference on Composite Materials. pp. 261-268, Tokyo.
59. Bauld, N.R., Goree, J.G. and Tzeng, L.-S. (1985). A Comparison of Finite-Difference and Finite-Element Methods for Calculating Free Edge Stresses in Composites, Computers & Structures, 20: 897-914.
60. Rybicki, E.F. (1971). Approximate Three-Dimensional Solutions for Symmetric Laminates under Inplane Loading, Journal of Composite Materials, 5: 354-360.
61. Spilker, R.L. (1980). A Traction-Free-Edge Hybrid-Stress Element for the Analysis of Edge Effects in Cross-Ply Laminates, Computers & Structures, 12: 167-179.
62. Spilker, R.L. and Chou, S.C. (1980). Edge Effects in Symmetric Composite Laminates: Importance of Satisfying the Traction Free Edge Condition, Journal of Composite Materials, 14: 2-20.
63. Wang, S.S. and Yuan, F.G. (1983). A Singular Hybrid Finite Element Analysis of Boundary-Layer Stresses in Composite Laminates. International Journal of Solids and Structures, 19: 825-837.
64. Wang, S.S. and Yuan, F.G. (1983). A Hybrid Finite Element Approach to Composite Laminate Elasticity Problems with Singularities, Journal of Applied Mechanics, 50: 835-844.
65. Yeh, J.R. and Tadjbakhsh, I.G. (1986). Stress Singularity in Composite Laminates by Finite Element Method, Journal of Composite Materials, 20: 347-364.
66. Bar-Yoseph, P. and Avrashi, J. (1986). New Variational-Asymptotic Formulations for Interlaminar Stress Analysis in Laminated Plates, Journal of Applied Mathematics and Physics (ZAMP), 37: 305-321.
67. Bar-Yoseph, P. and Ben-David, D. (1995). Free-Edge Effects in Unsymmetrically Laminated Composite Plates, Composite Structures, 30: 13-23.
68. Wörtler, M. (1989). Interlaminare Spannungskonzentrationen in Faserverbundwerkstoffen (in german), Dissertation Thesis, published in Fortschritt-Berichte VDI, Issue 1, No. 169, VDI Publishing House Düsseldorf, Germany.
69. Gruttmann, F. and Wagner, W. (1994). On the Numerical Analysis of Local Effects in Composite Structures, Composite Structures, 29: 1-12.
70. Gaudenzi, P., Mannini, A. and Carbonaro, R. (1998). Multi-Layer Higher-Order Finite Elements for the Analysis of Free-Edge Stresses in Composite Laminates, International Journal for Numerical Methods in Engineering, 41: 851-873.
71. Isakson, G. and Levy, A. (1971). Finite-Element Analysis of Interlaminar Shear in Fibrous Composites, Journal of Composite Materials, 5: 273-276.
72. Wang, A.S.D. and Crossman, F.W. (1977). Some New Results on Edge Effect in Symmetric Composite Laminates, Journal of Composite Materials, 11: 92-106.
73. Wang, A.S.D. and Crossman, F.W. (1977). Edge Effects on Thermally Induced Stresses in Composite Laminates, Journal of Composite Materials, 11: 300-312.
74. Raju, I.S. and Crews, J.H. (1981). Interlaminar Stress Singularities at a Straight Free Edge in Composite Laminates, Computers & Structures, 14: 21-28.
75. Yamada, Y. and Okumara, H. (1981). Analysis of Local Stress in Composite Materials by the 3D Finite Element, In: Composite Materials: Proceedings of the Japan-U.S. Conference, pp. 55-64, Tokyo.
76. Whitcomb, J.D., Raju, I.S. and Goree, J.G. (1982). Reliability of the Finite Element Method for Calculating Free Edge Stresses in Composite Laminates, Computers & Structures, 15: 23-37.
77. Hirai, T., Semba, T. and Tarui, M. (1982). Three-Dimensional Interlaminar Stress Distribution in Symmetric Composite Laminate, Progress in Science and Engineering of Composites, Proceedings of the International Conference on Composite Materials, pp. 243-250, Tokyo.
78. Rohwer, K. (1982). On the Determination of Edge Stresses in Layered Composites, Nuclear Engineering and Design, 70: 57-65.
79. Rohwer, K. (1982). Stresses and Deformations in Laminated Test Specimens of Carbon Fiber Reinforced Composites, Scientific Report No. DFVLR-FB 82-15, DFVLR, Institut für Strukturmechanik, Braunschweig, Germany.
80. Rohwer, K. (1985). Einsatz von finiten Elementen zur Berechnung von Faserverbundstrukturen (in german), Leichtbau mit kohlenstofffaserverstärkten Kunststoffen, pp. 160-210, In: Niederstadt, G., Block, J., Geier, B., Rohwer, K., Weiß, R. (eds), Reihe Kontakt & Studium, Vol. 167, Expert Publishing House, Sindelfingen, Germany.
81. Whitcomb, J.D. and Raju, I.S. (1985). Analysis of Interlaminar Stresses in Thick Composite Laminates with and without Edge Delamination, Delamination and Debonding of Materials, ASTM STP 876, pp. 69-94, Johnson, W.S. (ed.), American Society for Testing and Materials, Philadelphia.
82. Anquez, L. (1986). A Numerical Analysis of Singular Stress Fields at the Free Edge of Layered Composites, In: Brandt, A.M. and Marshall, I.H. (eds), Brittle Matrix Composite 1, pp. 287-303, Elsevier Applied Science, London, New York.
83. Sun, C.T. and Liao, W.C. (1990). Analysis of Thick Section Composite Laminates Using Effective Moduli, Journal of Composite Materials, 24: 977-993.
84. Frick, A. and Klamser, H. (1990). Untersuchung der Verschiebungs- und Spannungsverteilungen an unbelasteten Rändern multidirektionaler Laminate (in german), published in Fortschritt-Berichte VDI, Issue 1, No. 183, VDI Publishing House Düsseldorf, Germany.
85. Wu, C.M.L. (1990). Nonlinear Thermal and Mechanical Analysis of Edge Effects in Angle-Ply Laminates. Computers & Structures, 35: 705-717.
86. Wu, C.M.L. (1992). Elaslo-Plastic Analysis of Edge Effects in Metal Matrix Angle-Ply Laminates. Computers & Structures, 45: 273-280.
87. Joo, J.W. and Sun, C.T. (1992). A Failure Criterion for Laminates Governed by Free Edge Interlaminar Shear Stress, Journal of Composite Materials, 26: 1510-1522.
88. Kress, G.R. (1993). Analytische und experimentelle Untersuchung zu Versagensvorgängen in Faserverbundwerkstoffen mit besonderer Berücksichtigung der Randeffekte (in german), Dissertation Thesis, published in Fortschritt-Berichte VDI, Issue 18, No. 130, VDI Publishing House Düsseldorf, Germany.
89. Yang, H.T.Y. and He, C.C. (1994). Three-Dimensional Finite Element Analysis of Free Edge Stresses and Delamination of Composite Laminates, Journal of Composite Materials, 28: 1394-1412.
90. Schipperen, J.H.A. and Lingen, F.J. (1999). Validation of Two-Dimensional Calculations of Free Edge Delamination in Laminated Composites, Composite Structures, 45: 233-240.
91. Öry, H., Reimerdes, H.-G. and Dieker, S. (1984). Berechnung von interlaminaren Spannungen in mehrschichtigen Faserverbundwerkstoffen mit Hilfe von Übertragungsmatrizen (in german), Zeitschrift für Flugwissenschaften und Weltraumforschung, 8: 392-404.
92. Davi, G. (1996). Stress Fields in General Composite Laminates, AIAA Journal, 34: 2604-2608.
93. Lindemann, J. and Becker, W. (2000). Analysis of the Free-Edge Effect in Composite Laminates by the Boundary Finite Element Method, Mechanics of Composite Materials, 36: 355-366.
94. Lindemann, J. and Becker, W. (2001). Investigation of Stress-Concentration Problems in Composite Laminates by the Boundary Finite Element Method, In: Proceedings of the Third International Conference Tools for Mathematical Modelling, pp. 49-58, Saint-Petersburg.
95. Wolf, J.P. and Song, C. (1996). Finite-Element Modelling of Unbounded Media, John Wiley & Sons, Chichester et al.
96. Hein, V.L. and Erdogan, F. (1971). Stress Singularities in a Two-Material Wedge, International Journal of Fracture Mechanics, 7: 317-330.
97. Bogy, D.B. (1972). The Plane Solution for Anisotropic Elastic Wedges under Normal and Shear Loading, Journal of Applied Mechanics, 39: 1103-1109.
98. Kuo, M.C. and Bogy, D.B. (1974). Plane Solutions for the Displacement and Traction-Displacement Problems for Anisotropic Elastic Wedges, Journal of Applied Mechanics, 41: 197-202.
99. Dempsey, J.P. and Sinclair, G.B. (1981). On the Singular Behavior at the Vertex of a Bi-Material Wedge, Journal of Elasticity. 11: 317-327.
100. Zwiers, R.I., Ting, T.C.T. and Spilker, R.L. (1982). On the Logarithmic Singularity of Free-Edge Stress in Laminated Composites under Uniform Extension, Journal of Applied Mechanics, 49: 561-569.
101. Wang, S.S. and Choi, I. (1980). Boundary-Layer Hygroscopic Stresses in Angle-Ply Composite Laminates, In: Proceedings: Structures, Structural Dynamics, and Materials Conference, 21st, pp. 307-317, Seattle, USA.
102. Wang, S.S. and Choi, I. (1982). Boundary-Layer Effects in Composite Laminates, Part 1: Free-Edge Stress Singularities, Journal of Applied Mechanics, 49: 541-548.
103. Wang, S.S. and Choi, I. (1982). Boundary-Layer Effects in Composite Laminates, Part 2: Free-Edge Stress Solutions and Basic Characteristics, Journal of Applied Mechanics, 49: 549-560.
104. Wang, S.S. and Choi, I. (1982). Influence of Fiber Orientation and Ply Thickness on Hygroscopic Boundary-Layer Stresses in Angle-Ply Composite Laminates, Journal of Composite Materials, 16: 244-258.
105. Wang, S.S. (1981). Edge Delaminations in Angle-Ply Composite Laminates, In: Proceedings: Structures, Structural Dynamics, and Materials Conference, 22nd, pp. 473-484, Atlanta, USA.
106. Wang, S.S. (1983). Elasticity Solutions for a Class of Composite Laminate Problems with Stress Singularities, In: Hashin, Z. and Herakovich, C.T. (eds), Mechanics of Composite Materials - Recent Advances, pp. 259-281, Pergamon Press, New York.
107. Delale, F. (1984). Stress Singularities in Bonded Anisotropic Materials, International Journal of Solids and Structures, 20: 31-40.
108. Yang, Y.Y. (1992). Spannungssingularitäten in Zweistoffverbunden bei mechanischer und thermischer Belastung (in german), Dissertation Thesis, published in Fortschritt-Berichte VDI, Issue 18, No. 113, VDI Publishing House Düsseldorf, Germany.
109. Chimani, C.M., Böhm, H.J. and Rammerstorfer, F.G. (1998). On Interface Edge Singularities in Layered Composites, ZAMM, 78: 49-52.
110. Rahman, A. and Lau, A.C.W. (1998). Singular Stress Fields in Interfacial Notches of Hybrid Metal Matrix Composites, Composites: Part B, 29B: 763-768.
111. Chue, C.-H., Tseng, C.-H. and Liu, C.-I. (2001). On Stress Singularities in an Anisotropic Wedge for Various Boundary Conditions, Composite Structures, 54: 87-102.
112. Chue, C.-H., Chen, T.-H. and Lee, H.-T. (2002). A General Solution on Stress Singularities in the Junction of two Anisotropic Materials, Composite Structures, 55: 81-93.
113. Chue, C.-H. and Liu, C.-I. (2002). Disappearance of Free-Edge Stress Singularity in Composite Laminates, Composite Structures, 56: 111-129.
114. Chue, C.-H. and Liu, C.-I. (2002). Stress Singularities in a Bimaterial Anisotropic Wedge with Arbitrary Fiber Orientation, Composite Structures, 58: 49-56.
115. Chue, C.-H. and Weng, S.-M. (2002). Stress Singularities in Anisotropic Three-Material Wedges and Junctions with Applications, Composite Structures, 58: 443-456.
116. Müller, A., Hohe, J. and Becker, W. (2002). A Closed-Form Analysis of Material and Geometry Effects on Stress Singularities at Unsymmetric Bimaterial Notches, In: Proceedings: Jahrestagung GAMM, pp. 210-211, Augsburg 2002, Germany.
117. Müller, A., Hohe, J. and Becker, W. (2002). Material- und Geometrieabhängigkeit der Spannungssingularitäten an Bimaterialkerben (in German), Deutscher Verband für Materialforschung und -prüfung e.V., DVM-Bericht 234 Fortschritte der Bruch- und Schädigungsmechanik, pp. 109-118.
118. Muskhelishwili, N.I. (1975). Some Basic Problems of the Mathematical Theory of Elasticity, Noordhoff International Publishers, Leyden, The Netherlands.
119. Vanderplaats, G.N. (1984). Numerical Optimization Techniques for Engineering Design, 3rd edn, McGraw-Hill Inc., New York et al.
120. Kim, D.M. and Hong, C.S. (1992). A Simple Sublaminate Approach to the Design of Thick Composite Laminates for Suppression of Free-Edge Delamination, Composite Science and Technology, 43: 147-158.
121. Lindemann, J. and Becker, W. (2000). Optimierung von Verbundwerkstoffen unter Berücksichtigung des Laminatrandeffekts (in german), Scientific Report, Universität Siegen, Fachbereich Maschinentechnik, Institut für Mechatronik, Siegen, Germany.
122. Lindemann, J. and Becker, W. (2001). Optimization of Composite Laminates under Uniaxial Tension with Respect to the Free-Edge Effect, ZAMM 81, 3: S683-S684.
123. Lindemann, J. and Becker, W. (2002). The Tendency for Free-Edge Delamination in Laminates and its Minimization, Composites Science and Technology, 62: 233-242.
124. Whitney, J.M. and Browning, C.E. (1972). Free-Edge Delamination of Tensile Coupons, Journal of Composite Materials, 6: 300-303.
125. Pipes, R.B., Kaminski, B.E. and Pagano, N.J. (1973). Influence of the Free Edge upon the Strength of Angle-Ply Laminates, Analysis of the Test Methods for High Modulus Fibers and Composites, ASTM STP 521, pp. 218-228.
126. Sun, C.T. and Chu, G.D. (1991). Reducing Free Edge Effect on Laminate Strength by Edge Modification, Journal of Composite Materials, 25: 142-161.
127. Becker, W., Jin, P.P. and Neuser, P. (1999). Interlaminar Stresses at the Free Corners of a Laminate, Composite Structures, 45: 155-162.
128. Mittelstedt, C. and Becker, W. (2003). Three-Dimensional Closed-Form Analysis of the Stress Field at Rectangular Corners of Layered Plates, Archive of Applied Mechanics, 73: 63-74.
129. Mittelstedt, C. and Becker, W. (2003). Free-Corner Effects in Cross-Ply Laminates: An Approximate Higher-Order Theory Solution, Journal of Composite Materials, 37: 2043-2068.
130. Labossiere, P.E.W. and Dunn, M.L. (2001). Fracture Initiation at Three-Dimensional Bimaterial Interface Corners, Journal of the Mechanics and Physics of Solids, 49: 609-634.
131. Dimitrov, A., Andrae, H. and Schnack, E. (2001). Efficient Computation of Order and Mode of Corner Singularities in 3D-Elasticity, International Journal for Numerical Methods in Engineering, 51: 1-24.
132. Dimitrov, A., Buchholz, F.-G. and Schnack, E. (2002). 3D-Corner Effects in Crack Propagation, In: Mang, H.A., Rammerstorfer, F.G. and Eberhardsteiner, J. (eds), Proceedings of the WCCM V - Fifth World Congress on Computational Mechanics, pp. 1-10, Vienna 2002, Austria.
133. Salamon, N.J. (1980). An Assessment of the Interlaminar Stress Problem in Laminated Composites, Journal of Composite Materials, 14: 177-194.
134. Reddy, J.N. (1985). Finite-Element Modeling of Layered, Anisotropic Composite Plates and Shells: A Review of Recent Research, The Shock and Vibration Digest, 17: 3-12.
135. Rohwer, K. (1996). Modelle und Methoden zur Berechnung von Laminaten aus unidirektionalen Faserverbunden (in german), Habilitation Thesis, published in Fortschritt-Berichte VDI, Issue 1, No. 264, VDI Publishing House Düsseldorf, Germany.
136. Kant, T. and Swaminathan, K. (2000). Estimation of Transverse/ Interlaminar Stresses in Laminated Composites - A Selective Review and Survey of Current Developments, Composite Structures, 49: 65-75.