Progress in oxide composites

Annales de Chimie: Science des Materiaux

Volumn 30, Issue 6, 2005, Pages 547-563

  Keller, Kristin A ^b,c   Jefferson, George ^d   Kerans, Ronald J ^a  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b UES INC   (United States)

^c National Research Council ^*  (United States)

^d NATIONAL RESEARCH COUNCIL   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLE FAILURE; MYRAID POWER; OXIDE-OXIDE COMPOSITES;

BRITTLENESS; CERAMIC MATERIALS; DURABILITY; FAILURE (MECHANICAL); HIGH TEMPERATURE EFFECTS; OXIDES; POROUS MATERIALS;

COMPOSITE MATERIALS;

EID: 29844443893     PISSN: 01519107     EISSN: None     Source Type: Journal    
DOI: 10.3166/acsm.30.547-563     Document Type: Article

References (118)

1. 2 scale volatility under combustion conditions: I, Experimental results and empirical model, J. Am. Ceram. Soc. 82 (7) (1999) 1817-1825.
2. N.S. Jacobson, Corrosion of silicon-based ceramics in combustion environments, J. Am. Ceram. Soc. 76 (1) (1993) 3-28.
3. F. Rebillat, J. Lamon, R. Naslain, E. Lara-Curzio, M.K. Ferber, and T.M. Besmann, Properties of multilayered interphases in SiC/SiC chemical-vapor- infiltrated composites with "weak" and "strong" interfaces, J. Am. Ceram. Soc. 81 (9) (1998) 2315-2326.
4. R.J. Kerans, R.S. Hay, T.A. Parthasarathy, and M.K. Cinibulk, Interface design for oxidation-resistant ceramic composites, J. Am. Ceram. Soc. 85 (11) (2002) 2599-2632.
5. C.G. Levi, F.W. Zok, J.Y. Yang, M. Mattoni, and J.P.A. Lofvander, Microstructural design of stable porous matrices for all-oxide ceramic composites., Z. Metall. 90 (12) (1999) 1037-1047.
6. R. John, L.P. Zawada, and J.L. Kroupa, Stresses due to temperature gradients in ceramic-matrix-composite aerospace components, J. Am. Ceram. Soc. 82 (1) (1999) 161-168.
7. J.M. Staehler and L.Z. Zawada, Performance of four ceramic-matrix composite divergent flap inserts following ground testing on an F110 turbofan engine, J. Am. Ceram. Soc. 83 (7) (2000) 1727-1738.
8. T.J. McMahon, Advanced hot gas filter development, Ceram. Eng. Sci. Proc. 21 (3) (2000) 47-56.
9. M.G. Holmquist, T.C. Radsick, O.H. Sudre, and F.F. Lange, Fabrication and testing of all-oxide CFCC tubes, Comp. Part A 34 (2003) 163-170.
10. L.J. Korb, C.A. Morant, R.M. Calland, and C.S. Thatcher, The shuttle orbiter thermal protection system, Am. Ceram. Soc. Bull. 60 (11) (1981) 1188.
11. J.B. Davis, D.B. Marshall, K.S. Oka, R.M. Housley, and P.E.D. Morgan, Ceramic composites for thermal protection systems, Comp. Part A 30 (1999) 483-488.
12. K.A. Keller, G. Jefferson, and R.J. Kerans, Oxide-oxide composites, in Handbook of Ceramic Composites, N. Bansal, Editor. 2005, Kluwer Academic: Boston.
13. J.A. DiCarlo and H.-M. Yun, Non-oxide (silicon carbide) fibers, in Handbook of Ceramic Composites, N. Bansal, Editor. 2005, Kluwer Academic: Boston.
14. A.R. Bunsell, Oxide fibers, in Handbook of Ceramic Composites, N. Bansal, Editor. 2005, Kluwer Academic: Boston.
15. C.A. Eber, M.B. Ruggles-Wrenn, and S. Mall, Fatigue behavior of Nextel 720/alumina (N720/A) continuous fiber ceramic composite - Effects of temperature and steam environment, in Advances in Ceramic Matrix Composites 11, Ceramic Transactions, vol. 175, N.P. Bansal, J.P. Singh, and W. Kriven, Editors. 2005, American Ceramic Society: Westerville, OH.
16. L.B. Harlan, M.B. Ruggles-Wrenn, and S. Mall, Creep-rupture behavior of Nextel 720/alumina (N720/A) continuous fiber ceramic composite - Effects of temperature and steam environment, in Advances in Ceramic Matrix Composites 11, Ceramic Transactions, vol. 175, N.P. Bansal, J.P. Singh, and W. Kriven, Editors. 2005, American Ceramic Society: Westerville, OH.
17. G.S. Corman, Creep of yttrium aluminum garnet single crystals, J. Mat. Sci. Let. 12 (1993) 379-382.
18. D.M. Wilson and L.R. Visser, High performance oxide fibers for metal and ceramic composites, Composites, Part A 32 (2001) 1143-1153.
19. G.N. Morscher, K.C. Chen, and K.S. Mazdiyasni, Creep resistance of developmental polycrystalline yttrium-aluminum garnet fibers, Ceram. Eng. Sci. Proc. 15 (4) (1994) 181-188.
20. B.H. King and J.W. Halloran, Polycrystalline yttrium aluminum garnet fibers from colloidal sols, J. Am. Ceram. Soc. 78 (8) (1995) 2141-2148.
21. T.-I. Mah, T.A. Parthasarathy, M.D. Petry, and L.E. Matson, Processing, structure and properties of alumina-YAG eutectic fibers, Ceram. Eng. & Sci. Proc. 14 (7-8) (1993) 622-638.
22. 2 hypo-eutectic fibers, Eng. Fract. Mech. 69 (2002) 1015-1024.
23. 3) eutectic fibers, Scripta Mater. 36 (9) (1997) 961-966.
24. T.A. Parthasarathy, T.-I. Mah, and L.E. Matson, Processing, structure and properties of alumina-YAG eutectic composites, Journal of Ceramic Processing Research 5 (4) (2004) 380-390.
25. C.H. Ruscher, S.T. Mileiko, and H. Schneider, Mullite single cryslal fibres produced by the internal crystallization method (ICM), J. Eur. Ceram. Soc. 23 (2003) 3113-3117.
26. A.R. Bhatti and P.M. Farries, Preparation of long-fiber-reinforced dense glass and ceramic matrix composites, in Carbon/carbon, Cement and Ceramic Matrix Composites, R. Warren, Editor. 2000, Elsevier Science Ltd.: Oxford, p. 645-667.
27. E.H. Moore, C.A. Folsom, K.A. Keller, and T. Mah, 3D composite fabrication through matrix slurry pressure infiltration, Ceram. Eng. Sci. Proc. 15 (4) (1994) 113-120.
28. S.M. Sim and R.J. Kerans, Slurry infiltration of 3-D woven composites, Ceram. Eng. Sci. Proc. 13 (1992) 632-641.
29. B.N. Cox, D.B. Marshall, Q.D. Yang, and J.B. Davis. Integral textile ceramic structures for heat exchanger applications, in Proceedings of the 35th International SAMPE Technical Conference. 2003. Dayton, Ohio: SAMPE.
30. D.C.C. Lam and F.F. Lange, Microstructual observations on constrained densification of alumina powder containing a periodic array of sapphire fibers, J. Am. Ceram. Soc. 77 (7) (1994) 1976-1978.
31. M.N. Rahaman, Ceramic Processing and Sintering. 1st ed. 1995, New York: Marcel-Dekker, Inc.
32. F.F. Lange, C.G. Levi, and F.W. Zok, Processing fiber reinforced ceramics with porous matrices, in Carbon/carbon, Cement and Ceramic Matrix Composites, R. Warren, Editor. 2000, Elsevier Science Ltd.: Oxford, p. 427-447.
33. Y.H. Bao and P.S. Nicholson, Conductive, polypyrrole coating on mulhite/alumina fibers for electrophoretic deposition of oxide matrices, J. Am. Ceram. Soc. 87 (9) (2004) 1767-1770.
34. E. Stoll, P. Mahr, H.-G. Kruger, H. Kern, B.J.C. Thomas, and A.R. Boccaccini, Fabrication technologies for oxide-oxide ceramic matrix composites based on electrophoretic deposition, J. Eur. Ceram. Soc. (in press) (2005).
35. P. Colomban and M. Wey, Sol-gel control of matrix net-shape sintering in 3D fibre reinforced ceramic matrix composites, J. Eur. Ceram. Soc. 17 (1997) 1475-1483.
36. K.K. Chawla, Ceramic Matrix Composites. 1993, University Press, Cambridge: Chapman & Hall.
37. M.L. Antti, E. Lara-Curzio, and R. Warren, Thermal degradation of an oxide fibre (Nextel 720)/aluminosilicate composite, J. Eur. Ceram. Soc. 24 (2004) 565-578.
38. M.A. Mattoni and F.W. Zok, Strength and notch sensitivity of porous-matrix oxide composites, J. Am. Ceram. Soc. 88 (6) (2005) 1504-1513.
39. H. Fujita, C.G. Levi, F.W. Zok, and G. Jefferson, On the use of an alumina precursor for controlling mechanical properties of porous mullite/alumina mixtures, J. Am. Ceram. Soc. 88 (2) (2005) 367-375.
40. J.J. Haslam, K.E. Berroth, and F.F. Lange, Processing and properties of an all-oxide composite with a porous matrix, J. Eur. Ceram. Soc. 20 (2000) 607-618.
41. R.A. Simon, Progress in Processing and Performance of Porous-Matrix Oxide/Oxide Composites, Int. J. App. Ceram. Tech. 2 (2) (2005) 141-149.
42. M.G. Holmquist and F.F. Lange, Processing and properties of a porous oxide matrix composite reinforced with continuous oxide fibers, J. Am. Ceram. Soc. 86 (10) (2003) 1733-1740.
43. E.P. Luther, F.F. Lange, D.S. Pearson, and M. Colic, Development of short-range repulsive potentials by short-chain surfactants in aqueous slurries, J. Am. Ceram. Soc. 82 (1) (1999) 74-80.
44. M. Schmucker, A. Grafmller, and H. Schneider, Mesostructure of WHIPOX all oxide CMCs, Comp. Part A 34 (2003) 613-622.
45. H. Schneider, J. Goring, B. Kanka, and M. Schmucker, WHIPOX: A new oxide fibre/oxide matrix composite for high-temperature applications, Keram. Zeit. 53 (9) (2001) 788-791.
46. A. Souto and F. Guitian, Purification of mullite by reduction and volatilization of impurities, J. Am. Ceram. Soc. 82 (10) (1999) 2660-2664.
47. N.S. Jacobson, E.J. Opila, and K.N. Lee, Oxidation and corrosion of ceramics and ceramic matrix composites, Current Opinion in Solid State and Materials Science 5 (2001) 301-309.
48. 2O, J. Am. Ceram. Soc. 83 (3) (2000) 657-659.
49. 3M Nextel Ceramic Textiles Technical Notebook. 2001, 3M Ceramic Fibers and Textiles: St Paul MM.
50. L.P. Zawada, J. Staehler, and S.O. Steel, Consequence of intermittent exposure to moisture and salt fog on the high-temperature fatigue durability of several ceramic matrix composites, J. Am. Ceram. Soc. 86 (8) (2003) 1282-1291.
51. S.G. Steel, L.P. Zawada, and S. Mall, Fatigue behavior of a Nextel(tm) 720/alumina (N720/A) composite at room temperature, Ceram. Eng. Sci. Proc. 22 (3) (2001) 695-702.
52. M.K. Cinibulk, K.A. Keller, T. Mah, and T.A. Parthasarathy, Nextel 610 fiber-reinforced alumina-YAG porous matrix composites, Ceram. Eng. Sci. Proc. 23 (3) (2002) 629-636.
53. M.K. Cinibulk, K.A. Keller, and T.-I. Man, Effect of yttrium aluminum garnet additions on alumina-fiber-reinforced porous-alumina-matrix composites, J. Am. Ceram. Soc. 87 (5) (2004) 881-887.
54. D.J. Buchanan, R. John, and L.P. Zawada, Creep rupture behavior of +/-45° oxide/oxide Nextel 720/AS composite, Ceram. Eng. Sci. Proc. 24 (4) (2003) 451-458.
55. K.-Y. Hsu, L.P. Goss, and W.M. Roquemore, Characteristics of a trapped-vortex combustor, J. Propuls. Power 14 (1) (1998) 57-65.
56. M.A. Mattoni, J.Y. Yang, C.G. Levi, and F.W. Zok, Effects of combustor rig exposure on a porous-matrix oxide composite, Int. J. App. Ceram. Tech. 2 (2) (2005) 133-140.
57. T.A. Parthasarathy, L.P. Zawada, R. John, M.K. Cinibulk, and R.J. Kerans, Evaluation of oxide-oxide composites in a novel combustor wall application, Int. J. App. Ceram. Tech. 2 (2) (2005) 122-132.
58. B.N. Cox, Q.D. Yang, D.B. Marshall, and J.B. Davis, Design issues in using integral textile ceramic composites in turbine engine combustors, J. Propuls. Power 21 (2) (2005) 314-326.
59. M.A. Mattoni and F.W. Zok, Notch sensitivity of ceramic composites with rising fracture resistance, J. Am. Ceram. Soc. 87 (5) (2004) 914-922.
60. A.R. Boccaccini, S. Atiq, D.N. Boccaccini, I. Dlouhy, and C. Kaya, Fracture behaviour of mullite fibre reinforced-mullite matrix composites under quasi-static and ballistic impact loading, Comp. Sci. Tech. 65 (2005) 325-333.
61. V.A. Kramb, R. John, and D.A. Stubbs, A study of the damage progression from notches in an oxide/oxide ceramic-matrix composite using ultrasonic C-scans, Comp. Sci. Tech. 61 (2001) 1561-1570.
62. T.A. Parthasarathy, K.A. Keller, T.-I. Mah, R.J. Kerans, and S. Butner, Reduction of thermal-gradient-induced stresses in composites using mixed fibers, J. Am. Ceram. Soc. 87 (4) (2004) 617-625.
63. N.P. Bansal and J.I. Eldridge, Effects of interface modification on mechanical behavior of Hi-Nicalon fiber-reinforced celsian matrix composites, Ceram. Eng. Sci. Proc. 18 (3) (1997) 379-389.
64. R.W. Goettler, S. Sambasivan, and V.P. Dravid, Isotropic complex oxides as fiber coatings for oxide-oxide CFCC, Ceram. Eng. Sci. Proc. 18 (3) (1997) 279-286.
65. M.H. Lewis, A. Tye, E. Butler, and I. Al-Dawery, Development of interfaces in oxide matrix composites, Key Eng. Mater. 164-165 (1999) 351-356.
66. P.E.D. Morgan, D.B. Marshall, and R.M. Housley, High temperature stability of monazite-alumina composites, Mat. Sci. Eng. A 195 (1995) 215-222.
67. P.E.D. Morgan and D.B. Marshal, Ceramic composites of monazite and alumina, J. Am. Ceram. Soc. 78 (6) (1995) 1553-1563.
68. T.A. Parthasarathy, E. Boakye, M.K. Cinibulk, and M.D. Petry, Fabrication and testing of oxide/oxide microcomposites with monazite and hibonite as interlayers, J. Am. Ceram. Soc. 82 (12) (1999) 3575-3658.
69. 4) coated saphikon fiber/alumina matrix composites, J. Eur. Ceram. Soc. 20 (2000) 551-559.
70. 4-containing ceramics, Mat. Sci. Eng. A. 210 (1996) 123-134.
71. R.L. Callender and A.R. Barron, Formation and evaluation of highly uniform aluminate interface coatings for sapphire fiber reinforced ceramic matrix composites (FRCMCs) using carboxylate-alumoxane nanoparticles, J. Mater. Sci. 36 (2001) 4977-4987.
72. D.-H. Kuo, W.M. Kriven, and T.J. Mackin, Control of interfacial properties through fiber coatings: Monazite coatings in oxide-oxide composites, J. Am. Ceram. Soc. 80 (12) (1997) 2987-2996.
73. D.B. Marshall and W.C. Oliver, Measurement of interfacial mechanical properties in fiber-reinorced ceramic composites, J. Am. Ceram. Soc. 70 (8) (1987) 542-48.
74. R.J. Kerans and T.A. Parthasarathy, Theoretical analysis of the fiber pullout and pushout tests, J. Am. Ceram. Soc. 74 (7) (1991) 1585-1596.
75. T.A. Parthasarathy, P.D. Jero, and R.J. Kerans, Extraction of interface properties from the fiber push-out test, Scripta Metall, et Mater. 25 (11) (1991) 2457-2462.
76. T.A. Parthasarathy, D.B. Marshall, and R.J. Kerans, Analysis of the effect of interfacial roughness on fiber debonding and sliding in brittle matrix composites, Acta Met. 42 (11) (1994) 3773-3784.
77. P.D. Jero, R.J. Kerans, and T.A. Parthasarathy, Effect of interfacial roughness on the frictional stress measured using pushout tests, J. Am. Cer. Soc. 74 (11) (1991) 2793-2801.
78. K.A. Keller, T. Mah, E.E. Boakye, T.A. Parthasarathy, and P. Mogilevsky, unpublished research.
79. J.B. Davis, R.S. Hay, D.B. Marshall, P.E.D. Morgan, and A. Sayir, Influence of interfacial roughness on fiber sliding in oxide composites with La-monazite interphases, J. Am. Ceram. Soc. 86 (2) (2003) 305-316.
80. R.S. Hay, Monazite and scheelite deformation mechanisms, Cer. Eng. Sci. Proc. 21 (4) (2000) 203-218.
81. K.A. Keller, T. Mah, T.A. Parthasarathy, E. Boakye, P. Mogilevsky, and M.K. Cinibulk, Effectiveness of monazite coatings in oxide/oxide composites after long-term exposure at high-temperature, J. Am. Ceram. Soc. 86 (2) (2003) 325-332.
82. 4) coated-fiber reinforced oxide-oxide composites, in High Temperature Ceramic Matrix Composites 5 - Proceedings of the 5th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 5), M. Singh, et al., Editors. 2004, The American Ceramic Society: Westerville, OH.
83. P.Y. Lee and T. Yano, The influence of fiber coating conditions on the mechanical properties of alumina/alumina composites, Comp. Interfaces 11(1) (2004) 1-13.
84. A. Cazzato, M. Colby, D. Daws, J.B. Davis, P.E.D. Morgan, J. Porter, S. Butner, and B. Jurf, Monazite interface coatings in polymer and sol-gel derived ceramic matrix composites, Ceram. Eng. Sci. Proc. 18 (3) (1997) 269-278.
85. 4, J. Eur. Ceram. Soc. 19 (1999) 2421-2426.
86. J.B. Davis, D.B. Marshall, and P.E.D. Morgan, Monazite-containing oxide/oxide composites, J. Eur. Ceram. Soc. 20 (5) (2000) 583-587.
87. R.W. Goettler, S. Sambasivan, V.P. Dravid, and S. Kim, Interfaces in oxide fiber-oxide matrix ceramic composites, in Computer Aided Design of High Temperature Materials, A. Pechenik, R. Kalia, and P. Vashishta, Editors. 1999, Oxford University Press, p. 333-349.
88. C. Kaya, E.G. Butler, A. Selcuk, D.N. Boccaccini, and M.H. Lewis, Mullite (Nextel 720) fibre-reinforced mullite matrix composites exhibiting favourable thermomechanical properties, J. Eur. Ceram. Soc. 22 (2002) 2333-2342.
89. J.B. Davis, D.B. Marshall, R.M. Housley, and P.E.D. Morgan, Machinable ceramics containing rare-earth phosphates, J. Am. Ceram. Soc. 81 (8) (1998) 2169-2175.
90. E.E. Boakye, R.S. Hay, P. Mogilevsky, and L.M. Douglas, Monazite coatings on fibers: II, Coating without strength degradation, J. Am. Ceram. Soc. 84 (12) (2001) 2793-2801.
91. E. Boakye, R.S. Hay, M.D. Petry, and T.A. Parthasarathy, Sol-gel synthesis of zircon-carbon precursors and coating of Nextel 720 fiber tows., Ceram. Eng. Sci. Proc. 20 (3) (1999) 165-172.
92. M. Holmquist, R. Lundberg, O. Sudre, A.G. Razzell, L. Molliex, J. Benoit, and J. Adlerborn, Alumina/alumina composite with a porous zirconia interphase - Processing, properties and component testing, J. Eur. Ceram. Soc. 20 (2000) 599-606.
93. M.K. Cinibulk, T.A. Parthasarathy, K.A. Keller, and T. Mah, Porous rare-earth aluminate fiber coatings for oxide-oxide composites, Ceram. Eng. Sci. Proc. 21 (4) (2000) 219-228.
94. J.B. Davis, J.P.A. "Lofvander, A.G. Evans, E. Bischoff, and M.L. Emiliani, Fiber coating concepts for brittle matrix composites, J. Am. Cer. Soc. 76 (5) (1993) 1249-1257.
95. K.A. Keller, T.-I. Mah, C.M. Cooke, and T.A. Parthasarathy, Fugitive Interfacial Carbon Coatings for Oxide/Oxide Composites, J. Am. Ceram. Soc. 83 (2) (2000) 329-36.
96. P.W.M. Peters, B. Daniels, F. Clemens, and W.C. Vogel, Mechanical characterization of mullite-based ceramic matrix composites at test temperatures up to 1200C, J. Eur. Ceram. Soc. 20 (2000) 531-535.
97. E. Lara-Curzio, M. Ferber, and R.A. Lowden, Effect of fiber coating thickness on the interfacial properties of a continuous fiber ceramic matrix composite, Cer. Eng. Sci. Proc. 15 (5) (1994) 989-1003.
98. O. Sudre, A.G. Razzell, L. Molliex, and M. Holmquist, Alumina single-crystal fibre reinforced alumina matrix for combustor tiles, Ceram. Eng. Sci. Proc. 19 (4) (1998) 273-280.
99. B. Saruhan, M. Schmucker, M. Bartsch, H. Schneider, K. Nubian, and G. Wahl, Effect of interphase characteristics on long-term durability of oxide-based fibre-reinforced composites, Comp. Part A 32 (2001) 1095-1103.
100. 2 on mullite fibers for interfaces in mullite/aluminosilicate fiber-reinforced composites, J. Eur. Ceram. Soc. 20 (2000) 537-544.
101. D.B. Gundel, P.J. Taylor, and F.E. Wawner, Fabrication of thin oxide coatings on ceramic fibres by a sol-gel technique, J. Mater. Sci. 29 (1994) 1795.
102. R.S. Hay and E.E. Hermes, Sol-gel coatings on continuous ceramic fibers, Cer. Eng. Sci. Proc. 11 (9-10) (1990) 1526-1532.
103. H. Dislich and E. Hussmann, Amorphous and crystalline dip coatings obtained from organometallic solutions: Procedures, chemical processes, and products, Thin Solid Films 77 (1981) 129-139.
104. P.D. Jero, F. Rebillat, D.J. Kent, and J.G. Jones, Crystallization of lanthanum hexaluminate from MOCVD precursors, Ceram. Eng. Sci. Proc. 19 (3) (1998) 359-360.
105. 4, Ceram. Eng. Sci. Proc. 20 (4) (1999) 355-362.
106. P.V. Chayka, Liquid MOCVD Precursors and Their Application to Fiber Interface Coatings, Ceram. Eng. Sci. Proc. 18 (3) (1997) 287-294.
107. P.W. Brown, Electrophoretic deposition of mullite in a continuous fashion utilizing non-aqueous polymeric sols, in Ceramic Transactions, Vol. 56, K.V. Logan, Editor. 1995, American Ceramic Society: Columbus, OH.
108. R.W. Rice, B27N coating of ceramic fibers for ceramic fiber composites, U.S. Patent No. 4,642,27l, Feb 10, 1987
109. R. Naslain, O. Dugne, A. Guette, J. Sevely, C.R. Brosse, J.P. Rocher, and J. Cotteret, Boron nitride interphase in ceramic matrix composites, J. Am. Cer. Soc. 74 (10) (1991) 2482-2488.
110. C.J. Griffin and R.R. Kieschke, CVD processing of fiber coatings for CMCs, Cer. Eng. Sci. Proc. 16 (4) (1995) 425-432
111. M.H. Lewis, Interfaces in ceramic matrix composites, in Carbon/Carbon, Cement and Ceramic Matrix Composites, R. Warren, Editor. 2000, Elsevier: Oxford, p. 289-322.
112. T.J. Illston, C.B. Ponton, P.M. Marquis, and E.G. Butler, Electrophoretic deposition of silica/alumina colloids for the manufacture of CMC's, Cer. Eng. Sci. Proc. 15 (5) (1994) 1052-1059.
113. P. Colomban, E. Bruneton, J.L. Lagrange, and E. Mouchon, Sol-gel mullite matrix-SiC and - mullite 2D woven fabric composites with or without zirconia containing interphase: Elaboration and properties, J. Eur. Ceram. Soc. 16 (1996) 301-314.
114. R.S. Hay, M.D. Petry, K.A. Keller, M.K. Cinibulk, and J.R. Welch, Carbon and oxide coatings on continuous ceramic fibers, in Ceramic Matrix Composites - Advanced High Temperature Structural Materials, R.A. Lowden, et al., Editors. 1995, Materials Research Society. Warrendale, Pa
115. E.E. Boakye, R.S. Hay, and M.D. Petry, Continuous coating of oxide fiber tows using liquid precursors: Monazite coatings on Nextel 720, J. Am. Ceram. Soc. 82 (9) (1999) 2321-2331.
116. E.E. Boakye, T. Mah, C.M. Cooke, and K.A. Keller, Initial assessment of the weavability of monazite-coated oxide fibers, J. Am. Ceram. Soc. 87 (9) (2004) 1775-1778.
117. P.Y. Lee and T. Yano, A new route to prepare monazite coating on alumina fabric cloths for alumina/alumina composites, in Materials Processing for Properties and Performance, Vol. 2, K.A. Khor, et al., Editors. 2004, Institute of Materials: East Asia.
118. R.S. Hay, J.R. Welch, and M.K. Cinibulk, TEM specimen preparation and characterization of ceramic coatings on fiber tows, Thin Solid Films 308-309 (1997) 389-392.