Modelling of microstructure and its evolution in shape-memory-alloy single-crystals, in particular in CuAlNi

Meccanica

Volumn 40, Issue 4-6 SPEC. ISS., 2005, Pages 389-418

  Kružík, Martin ^a,b   Mielke, Alexander ^c,d   Roubíček, Tomáš ^a,e  

^a INSTITUTE OF INFORMATION THEORY AND AUTOMATION   (Czech Republic)

^b CZECH TECHNICAL UNIVERSITY IN PRAGUE   (Czech Republic)

^c WEIERSTRASS INSTITUTE FOR APPLIED ANALYSIS AND STOCHASTICS   (Germany)

^d HUMBOLDT UNIVERSITY   (Germany)

^e CHARLES UNIVERSITY   (Czech Republic)

Author keywords

Cubic to orthorhombic martensitic transformation; Energetic formulation; Laminates; Rateindependent evolution; Space time discretization; Young measures

Indexed keywords

APPROXIMATION THEORY; COMPUTER SIMULATION; CONTINUUM MECHANICS; COPPER COMPOUNDS; LAMINATES; MATHEMATICAL MODELS; SHAPE MEMORY EFFECT; SINGLE CRYSTALS;

ENERGETIC FORMULATION; RATEINDEPENDENT FORMULATION; SPACE-TIME DISCRETIZATION; YOUNG MEASURES;

MICROSTRUCTURE;

EID: 29144470595     PISSN: 00256455     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11012-005-2106-1     Document Type: Article

References (82)

1. Abeyaratne, R., Chu, C. and James, R.D., 'Kinetics of materials with wiggly energies: Theory and application to the evolution of twinning microstructures in a Cu-Al-Ni shape memory alloy', Phil. Mag. A 73 (1996) 457-497.
2. Abeyaratne, R. and Knowles, J.K., 'On the propagation of maximally dissipative phase boundaries in solids', Q. Appl. Math. 50 (1992) 149-172.
3. Arndt, M., Upscaling from Atomistic Models to Higher Order Gradient Continuum Models for Crystalline Solids. PhD.Thesis, Inst. für Numer. Simulation, Universität Bonn, 2004.
4. Aubri, S., Fago, M. and Ortiz, M., A constrained sequential-lamination algorithm for the simulation of sub-grid microstructure in martensitic materials', Comp. Meth. Appl. Mech. Engr. 192 (2003) 2823-2843.
5. Auld, B.A., Acoustic Fields and Waves in Solids. Vol I. Wiley, New York, 1973.
6. Auricchio, F. and Petrini, L., A three-dimensional model describing stress-temperature induced solid phase transformations: solution algorithm and boundary value problems', Int. J. Numer. Methods Engrg. 61 (2004), 807-836.
7. Auricchio, F., Taylor, R.L. and Lubliner, J., 'Shape-memory alloys: macromodelling and numerical simulations of the superelastic behaviour', Comp. Meth. Appl. Mech. Engr. 146 (1997) 281-312.
8. Ball, J.M., Chu, C. and James, R.D., 'Hysteresis during stress-induced variant rearrangement', J. de Physique IV (C8) 5 (1995) 245-251.
9. Ball, J.M., Holmes, P.J., James, R.D., Pego, R.L. and Swart P.J., 'On the dynamics of fine structure', J. Nonlinear Sci. 1 (1991) 17-70.
10. Ball, J.M. and James, R.D., 'Fine phase mixtures as minimizers of energy', Archive Rat. Mech. Anal. 100 (1988) 13-52.
11. Ball, J.M. and James, R.D., 'Proposed experimental tests of a theory of fine microstructure and the two-well problem', Phil. Trans. Royal Soc. Lond. A 338 (1992) 389-450.
12. Bhattacharya, K., Microstructure of Martensite. Why it Forms and How it Gives Rise to the Shape-Memory Effect, Oxford University Press, New York, 2003.
13. Bhattacharya, K., Li, B. and Luskin, M., 'Uniqueness and stability of the simply laminated micro structure for martensitic crystals that undergo a cubic to orthorhombic phase transformation', Archive Rat. Mech. Anal. 149 (1999) 123-154.
14. Bhattacharya, K., Purohit, P. and Craciun, B., 'Mobility of twin and phase boundaries', Journal de Physique IV 112 (Proc. ICOMAT-02) (2003) 163-166.
15. Byrd, R.H., Lu, P., Nocedal J. and Zhu, C., A limited memory algorithm for bound constrained optimization', SIAM J. Sci. Comput. 16 (1995) 1190-1208.
16. Duggin, M.J. and Rachinger, W.A., 'The nature of the martensite transformation in a copper-nickel-aluminium alloy', Acta. Metal 12 (1964) 529.
17. Eve, R.A., Reddy, B.D. and Rockafellar, R.T., An internal variable theory of elastoplasticity based on the maximum plastic work inequality', Quarterly Appl. Math. 48 (1990) 59-83.
18. Falk, F. and Konopka, P., 'Three-dimensional Landau theory describing the matrensitic phase transformation of shape-memory alloys', J. Condens. Matter 2 (1990) 61-77.
19. Frémond, M., Non-Smooth Thermomechanics, Springer, Berlin, 2002.
20. Frémond, M. and Miyazaki, S., Shape Memory Alloys, Springer, Wien, 1996.
21. Goldstein, G.H., 'The effective energy and laminated microstructure in martensitic phase transformations', J. Mech. Phys. Solids, 49 (2001) 899-925.
22. Govindjee, S. and Miehe, C., 'A multi-variant martensitic phase transformation model: formulation and numerical implementation', Comp. Met. Appl. Mech. Eng. 191 (2001) 215-238.
23. Govindjee, S., Mielke, A. and Hall, G.J., 'Free-energy of mixing for n-variant martensitic phase transformations using quasi-convex analysis', J. Mech. Phys. Solids 50 (2002) 1897-1922.
24. Govindjee, S., Mielke, A., Hall, G.J. and Miehe, C., Application of notions of quasi-convexity to the modeling and simulation of martensitic and shape memory phase transformations', in: Mang, H.A., Rammerstorfer, F.G. and Eberhardsteiner, J. (eds) Proceeding 5th World Congress on Computational Mechanics, Vienna University of Technology, Austria, (2002).
25. Hackl, K. and Hoppe, U., 'On the calculation of microstructure for inelastic materials using relaxed energies', in: Miehe, Ch. (ed), IUTAM Symposium Comput. Mech. of Solid Materials at Large Strains Kluwer, Dordrecht, 2003, pp. 77-86.
26. Hall, G.J. and Govindjee, S., Application of the relaxed free energy of mixing to problems in shape memory alloy simulation', J. Intelligent Mater. Systems & Struct., in print.
27. Hill, R., A variational principle of maximum plastic work in classical plasticity', Q. J. Mech. Appl. Math. 1 (1948) 18-28.
28. Huo, Y. and Müller, I., 'Nonequilibrium thermodynamics of pseudoelasticity', Continuum Mech. Thermodyn. 5 (1993) 163-204.
29. James, R.D. and Hane, K.F., 'Martensitic transformations and shape-memory materials', Acta Mater. 48 (2000) 197-222.
30. James, R.D. and Zhang, Z., A way to search for multiferroic materials with "unlikely" combination of physical properties', in Manoza, L. et al. (eds) Interplay of Magnetism and Structure in Functional Materials, Springer, Berlin, 2004.
31. Kristensen, J., 'On the non-locality of quasiconvexity', Ann. Inst. H. Poincaré Anal. Non Linéaire 16 (1999) 1-13.
32. Kružík, M., 'Numerical approach to double-well problem', SIAM J. Numer. Anal. 35 (1998) 1833-1849.
33. Kružík, M. and Luskin, M., 'The computation of martensitic microstructure with piecewise laminates', J. Sci. Comp. 19 (2003) 293-308.
34. Kružík, M. and Roubíček, T., Mesoscopic model of microstructure evolution in shape memory alloys with applications to NiMnGa. Preprint IMA No.2003, University of Minnesota, Minneapolis, November 2004.
35. Landa, M., Plešek, J., Urbánek, P. and Novák, V., 'Evaluation of anisotropic elastic properties by ultrasonic methods', in: Proceedings 40th Intl. Conf. Experimental Stress Anal., Prague, June 3-6, 2002, pp. 141-146.
36. Levitas, V.I., 'The postulate of realizibility: formulation and applications to postbifurcational behavior and phase transitions in elastoplastic materials', Int. J. Eng. Sci. 33 (1995) 921-971.
37. Lexcellent, C., Moyne, S., Ishida, A. and Miyazaki, S., 'Deformation behaviour associated with the stress-induced martensitic transformation in Ti-Ni thin films and their thermodynamical modelling', Thin Solid Films, 324 (1998) 184-189.
38. Lubliner J., A maximum dissipation principle in generalized plasticity', Acta Mech. 52 (1984) 225-237.
39. Mainik, A. and Mielke, A., 'Existence results for energetic models for rate-independent systems', Calc. Var. 22 (2005) 73-99.
40. Mielke, A., 'Energetic formulation of multiplicative elastoplasticity using dissipation distances', Cont. Mech. Thermodyn. 15 (2003) 351-382.
41. Mielke, A., 'Evolution of rate-independent inelasticity with microstructure using relaxation and Young measures', in: Miehe, C. (ed) IUTAM Symp. Comput. Mech. of Solid Mater, at Large Strains Kluwer, Dordrecht, 2003, pp. 33-44.
42. Mielke, A., 'Evolution of rate-independent systems', in: Dafermos, C. and Feireisl, E. (eds.) Handbook of Differential Equations: Evolutionary Diff. Eqs., North-Holland, Amsterdam, 2005, in press.
43. Mielke, A. and Roubíček, T., 'Rate-independent model of inelastic behaviour of shape-memory alloys', Multiscale Modeling Simul. 1 (2003) 571-597.
44. Mielke, A. and Theil, F., A mathematical model for rate-independent phase transformations with hysteresis', in Alder, H.-D., Balean, R. and Farwig, R. (eds.) Models of Continuum Mechanics in Analysis and Engineering, Shaker Verlag, Aachen, 1999, pp. 117-129.
45. Mielke, A. and Theil, F., 'On rate-independent hysteresis models', Nonlin. Diff. Eg. Appl. 11 (2004) 151-189.
46. Mielke, A., Theil, F. and Levitas, V.I., 'A variational formulation of rate-independent phase transformations using an extremum principle', Archive Rat. Mech. Anal. 162 (2002) 137-177.
47. Müller, I. and Xu, H., 'On the pseudoelastic hysteresis', Acta Mettal. Mater. 39 (1991) 261-271.
48. Müller, S., 'Variational models for microstructure and phase transitions', Hildebrandt, S. et al. (eds) Lectures Notes in Mathematics 1713 (1999), Springer, Berlin, pp. 85- 210.
49. Novák, V, Šittner, P., Vokoun, D. and Zá rubová, N., 'On the anisotropy of martensitic transformation in Cu-based alloys', Mater. Sci. Eng. A273-275 (1999) 280-285.
50. Nicolaides, R.A. and Walkington, N.J., 'Computation of microstructure utilizing Young measure representations', in Rogers, C.A. and Rogers, R.A. (eds) Recent Advances in Adaptive and Sensory Materials and their Applications. Technomic Publiction, Lancaster, 1992, pp.131-141.
51. Otsuka, K. and Shimizu, K., 'Morphology and crystallography of thermoelastic Cu-Al-Ni martensite analyzed by the phenomenological theory', Trans. Japan Inst. Metals 15 (1974) 103-113.
52. Patoor, E., Eberhardt A. and Berveiller, M., 'Micromechanical modelling of shape memory alloys behaviour', Arch. Mech. 40 (1988) 775-794.
53. Pedregal, P., Parametrized Measures and Variational Principles, Birkäuser, Basel, 1997.
54. Pitteri, M. and Zanzotto, G., Continuum Models for Phase Transitions and Twinning in Crystals, Chapman & Hall, Boca Raton, 2003.
55. Plecháč, P. and Roubíček, T., 'Visco-elasto-plastic model for martensitic phase transformation in shape-memory alloys', Math. Methods Appl. Sci. 25 (2002) 1281-1298.
56. Rajagopal, K.R., and Roubíček, T., 'On the effect of dissipation in shape-memory alloys', Nonlin. Anal, Real World Appl. 4 (2003) 581-597.
57. Rajagopal, K.R., and Srinivasa, A.R., 'On the inelastic behaviour of solids - Part 1: Twinning. Int. J. Plasticity 11 (1995), 653-678.
58. Ren, X. and Truskinovsky, L., 'Finite scale microstructures in nonlocal elasticity', J. Elasticity 59 (2000) 319-355.
59. Rogers, R. and Truskinovsky, L., 'Discretization and hysteresis', Physica B 233 (1997) 370-375.
60. Roubíček, T., A note on an interaction between penalization and discretization', in: Kurzhanski, A. and Lasiecka, I. (eds) Modelling and Inverse Problems of Control for Distributed Parameter Systems, L.N. in Control and Inf. Sci. 154, Springer, Berlin, 1991, pp.145-150.
61. Roubíček, T., Relaxation in Optimization Theory and Variational Calculus, W. de Gruyter, Berlin, 1997.
62. Roubíček, T., 'Dissipative evolution of microstructure in shape memory alloys', in: Bungartz, H.-.T., Hoppe, R. H. W. and Zenger, C. (eds) Lectures on Applied Mathematics, Springer, Berlin, 2000, pp.45-63.
63. Roubíček, T., 'Evolution model for martensitic phase transformation in shape-memory alloys', Interfaces Free Boundaries 4 (2002), 111-136.
64. Roubíček, T., 'Models of microstructure evolution in shape memory materials', in: Ponte Castaneda, P., Telega, J.T. and Gambin, B. (eds) NATO Workshop Nonlinear Homogenization and its Appl. to Composites, Polycrystals and Smart Mater, NATO Sci. Series 11/170, Kluwer, Dordrecht, 2004, pp.269-304.
65. Roubíček, T. and Kružík, M., 'Mesoscopic model of microstructure evolution in shape memory alloys, its numerical analysis and computer implementation', in: Miehe, C. (ed) 3rd GAMM Seminar on microstructures, GAMM Mitteilungen, J.Wiley, in press.
66. Sedlák, P., Seiner, H., Landa, M., Novák, V., Sittner, P. and Manosa, LI., 'Elastic constants of bcc austenite and 2H orthorhombic martensite in CuAINi shape memory alloy', Acta Mat. (2005).
67. Šilhavý, M., 'On the hysteresis in martensitic transformations', in: Podio-Guidugli, P. and Brocato, M. (eds.), Rational Continua, Classical and New, Springer, Berlin, 2003, pp.151-168.
68. Simo, J.C., A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition', Camp. Math. Appl. Mech. Engrg. 66 (1988) 199-219,
69. Simo, J.C., A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition', Camp. Math. Appl. Mech. Engrg. 68 (1988) 1-31.
70. Šittner, P., Hashimoto, K., Kato, M. and Tokuda, M., 'Stress induced martensitic transformations in tension/torsion of CuAlNi single crystal tube', Scripta Mater. 48 (2003), 1153-1159.
71. Souza, A.C., Mamiya, E.N. and Zouain, N. Three-dimensional model for solids undergoing stress-induced phase transitions', Eur. J. Mech. A/Solids 15 (1998) 789-806.
72. Stupkiewicz, S. and Petryk, H., 'Modelling of laminated microstructures in stress-induced martensitic transformations', J. Mech. Phys. Solids 50 (2002) 2303-2331.
73. s-point', Scr. Metall. 10 (1976) 789-792.
74. Šverák, V., 'Rank-one convexity does not imply quasiconvexity', Proc. R. Soc. Edinb. 120 A (1992) 185-189.
75. Thamburaja, P. and Anand, L., 'Thermomechanically coupled superelastic response of initiallytextured TiNi sheet', Acta Mater. 51 (2003), 325-338.
76. Truskinovsky, L., 'Transition to detonation in dynamic phase changes', Archive Rat. Mech. Anal. 125 (1994) 375-397.
77. Vainchtein, A. and Rosakis, P., 'Hysteresis and stick-slip motion of phase boundaries in dynamic models of phase transitions', J. Nonlin. Sci. 9 (1999) 697-719.
78. Vivet, A. and Lexcelent, G, 'Micromechanical modelling for tension-compression pseudoelastic behaviour of AuCd single crystals', Euro Phys. J. A.P.4 (1998) 125-132.
79. Wilmanski, K., 'Symmetric model of stress-strain hysteresis loops in shape memory alloys', Int. J. Engr. Sci. 31 (1993) 1121-1138.
80. Xiangyang, Z., Qingping, S. and Shouwen, Y., 'A non-invariant plane model for the interface in CuAlNi single crystal shape memory alloys', J. Mech. Phys. Solids 48 (2000) 2163-2182.
81. Yasunaga, M., Funatsu, Y., Kojima, S., Otsuka, K. and Suzuki, T., 'Measurement of ellastic constants', Scr. Metall. 17 (1983) 1091.
82. Zhang, X.Y., Brinson, L.C. and Sun, Q.P., 'The variant selection criteria in single-crystal CuAlNi shape memory alloys', Smart Mater. Struct. 9 (2000) 571-581.