A rate-independent model for inelastic behavior of shape-memory alloys

Multiscale Modeling and Simulation

Volumn 1, Issue 4, 2003, Pages 571-597

  Mielke, Alexander ^a   Roubíček, Tomáš ^b,c  

^a UNIVERSITY OF STUTTGART   (Germany)

^b CHARLES UNIVERSITY   (Czech Republic)

^c INSTITUTE OF INFORMATION THEORY AND AUTOMATION   (Czech Republic)

Author keywords

Dissipation distance; Energetic formulation; Gradient Young measures; Martensitic transformation

Indexed keywords

ENERGY DISSIPATION; VOLUME FRACTION;

ENERGETIC FORMULATIONS; EXTERNAL FORCING; GRADIENT YOUNG MEASURES; HYSTERETIC RESPONSE; INELASTIC BEHAVIOR; RATE INDEPENDENTS; SHAPE-MEMORY; YOUNG MEASURE;

MARTENSITIC TRANSFORMATIONS;

EID: 85018392517     PISSN: 15403459     EISSN: 15403467     Source Type: Journal    
DOI: 10.1137/S1540345903422860     Document Type: Article

References (68)

1. E. Aranda and P. Pedregal, On the computation of the rank-one convex hull of a function, SIAM J. Sci. Comput., 22 (2001), pp. 1772-1790.
2. M. Arndt, M. Griebel, V. Novák, T. Roubíček, and P. Šittner, Martensitic/ Austenitic Transformation in NiMnGa: Simulation and Experimental Approaches, manuscript.
3. M. Arndt, M. Griebel, and T. Roubíček, Modelling of cubic to tetragonal martensitic transformation in shape memory alloys, Contin. Mech. Thermodyn., 2003, in print.
4. S. Aubri, M. Fago, and M. Ortiz, A constrained sequential-lamination algorithm for the simulation of sub-grid microstructure in martensitic materials, Comput. Methods Appl. Mech. Engrg., 192 (2003), pp. 2823-2843.
5. J. M. Ball, A version of the fundamental theorem for Young measures, in PDEs and Continuum Models of Phase Transitions, Lecture Notes in Phys. 344, M. Rascle, D. Serre, and M. Slemrod, eds., Springer, Berlin, 1989, pp. 207-215.
6. J. M. Ball and R. D. James, Fine phase mixtures as minimizers of energy, Arch. Rational Mech. Anal., 100 (1987), pp. 13-52.
7. J. M. Ball and R. D. James, Proposed experimental tests of a theory of fine microstructure and the two-well problem, Phil. Trans. Roy. Soc. London Ser. A 338 (1992), pp. 389-450.
8. M. Brokate and J. Sprekels, Hysteresis and Phase Transitions, Springer, New York, 1996.
9. P. Colli, M. Frémond, and A. Visintin, Thermo-mechanical evolution of shape memory alloys, Quart. Appl. Math., 48 (1990), pp. 31-47.
10. P. Colli and J. Sprekels, Global existence for a three-dimensional model for the thermo-mechanical evolution of shape memory alloys, Nonlinear Anal., 18 (1992), pp. 873-888.
11. P. Colli and A. Visintin, On a class of doubly nonlinear evolution equations, Comm. Partial Differential Equations, 15 (1990), pp. 737-756.
12. C. Collins and M. Luskin, The computation of austenitic-martensitic phase transition, in PDEs and Continuum Models of Phase Transitions, Lecture Notes in Phys. 344, M. Rascle, D. Serre, and M. Slemrod, eds., Springer, Berlin, 1989, pp. 34-50.
13. J. Ericksen, Constitutive theory for some constrained elastic crystals, Internat. J. Solids Structures, 22 (1986), pp. 951-964.
14. R. A. Eve, B. D. Reddy, and R. T. Rockafellar, An internal variable theory of elastoplasticity based on the maximum plastic work inequality, Quart. Appl. Math., 48 (1990), pp. 59-83.
15. F. Falk, Model free energy, mechanics and thermodynamics of shape memory alloys, Acta Metallurgica, 28 (1980), pp. 1773-1780.
16. F. D. Fischer, E. R. Oberaigner, K. Tanaka, and F. Nishimura, Transformationinduced plasticity revised, an updated formulation, Internat. J. Solids Structures, 35 (1998), pp. 2209-2227.
17. I. Fonseca, S. Müller, and P. Pedregal, Analysis of concentration and oscillation effects generated by gradients, SIAM J. Math. Anal., 29 (1998), pp. 736-756.
18. M. Frémond, Matériaux à mémoire de forme, C.R. Acad. Sci. Paris Ser. II, 304 (1987), pp. 239-244.
19. M. Frémond, Non-Smooth Thermomechanics, Springer, Berlin, 2002.
20. M. Frémond and S. Miyazaki, Shape Memory Alloys, Springer, Wien, 1996.
21. S. Govindjee, A. Mielke, and G. J. Hall, Free-energy of mixing for n-variant martensitic phase transformations using quasi-convex analysis, J. Mech. Phys. Solids, 50 (2002), pp. 1897-1922.
22. P. Germain, Q. S. Nquyen, and P. Suquet, Continuum thermodynamics, J. Appl. Mechanics (Trans. ASME), 50 (1983), pp. 1010-1020.
23. W. Han and B. D. Reddy, Plasticity (Mathematical Theory and Numerical Analysis), Springer, New York, 1999.
24. R. Hill, A variational principle of maximum plastic work in classical plasticity, Quart. J. Mech. Appl. Math., 1 (1948), pp. 18-28.
25. K.-H. Hoffmann, M. Niezgódka, and Z. Songmu, Existence and uniqueness of global solutions to an extended model of the dynamical development in shape memory alloys, Nonlinear Anal., 15 (1990), pp. 977-990.
26. R. D. James, Hysteresis in Phase Transformations, in ICIAM 95 (Hamburg, 1995), Math. Res. 87, Akademie Verlag, Berlin, 1996, pp. 135-154.
27. D. Kinderlehrer and P. Pedregal, Characterizations of Young measures generated by gradients, Arch. Rational Mech. Anal., 115 (1991), pp. 329-365.
28. D. Kinderlehrer and P. Pedregal, Weak convergence of integrands and the Young measure representation, SIAM J. Math. Anal., 23 (1992), pp. 1-19.
29. D. Kinderlehrer and P. Pedregal, Gradient Young measures generated by sequences in Sobolev spaces, J. Geom. Anal., 4 (1994), pp. 59-90.
30. P. Krejčí, J. Sprekels, and U. Stefanelli, Phase-field models with hysteresis in one-dimensional thermoviscoplasticity, SIAM J. Math. Anal., 34 (2002), pp. 409- 434.
31. J. Kristensen, Lower Semicontinuity of Variational Integrals, Ph.D. Thesis, Technical University of Denmark, Lungby, 1994.
32. M. Kružík, Numerical approach to double well problem, SIAM J. Numer. Anal., 35 (1998), pp. 1833-1849.
33. J. Lubliner, A maximum dissipation principle in generalized plasticity, Acta Mech., 52 (1984), pp. 225-237.
34. J. Lubliner, Plasticity Theory, Macmillan, New York, 1990.
35. M. Luskin, On the computation of crystalline microstructure, Acta Numerica, 5 (1996), pp. 191-257.
36. A. Mainik and A. Mielke, Existence Results for Energetic Models for Rate- Independent Systems, preprint, 2003.
37. G. A. Maugin, The Thermomechanics of Plasticity and Fracture, Cambridge University Press, Cambridge, UK, 1992.
38. G. A. Maugin, The Thermomechanics of Nonlinear Irreversible Behaviors, World Scientific, Singapore, 1999.
39. A. Mielke, Estimates on the mixture function for multiphase problems in elasticity, in Multifield Problems, A.-M. Sändig, W. Schiehlen, and W. L.Wendland, eds., Springer, Berlin, 2000, pp. 96-103.
40. A. Mielke, Deriving evolution equations for microstructures via relaxation of variational incremental problems, Comput. Methods Appl. Mech. Engrg., 2002, submitted.
41. A. Mielke, Energetic formulation of multiplicative elasto-plasticity using dissipation distances, Contin. Mech. Thermodyn., to appear.
42. C. Miehe and M. Lambrecht, Analysis of microstructure development in shearbands by energy relaxation of incremental stress potentials: Large-strain theory for generalized standard solids, Internat. J. Numer. Methods Engrg., 58 (2003), pp. 1-41.
43. A. Mielke and F. Theil, A mathematical model for rate-independent phase transformations with hysteresis, in Models of Continuum Mechanics in Analysis and Engineering, H.-D. Alder, R. Balean, and R. Farwig, eds., Shaker Verlag, Aachen, 1999, pp. 117-129.
44. A. Mielke and F. Theil, On rate-independent hysteresis models, NoDEA Nonlinear Differential Equations Appl., to appear.
45. A. Mielke, F. Theil, and V. I. Levitas, A variational formulation of rate- independent phase transformations using an extremum principle, Arch. Rational Mech. Anal., 162 (2002) pp. 137-177.
46. Müller, A model for a body with shape-memory, Arch. Rational Mech. Anal., 70 (1979), pp. 61-77.
47. S. Müller, Variational models for microstructure and phase transitions, in Calculus of Variations and Geometric Evolution Problems, S. Hildebrandt et al., eds., Springer, Berlin, 1999, pp. 85-210.
48. I. Müller and S. Seelecke, Thermodynamic aspects of shape memory alloys, Math. Comput. Modelling, 34 (2001), pp. 1307-1355.
49. I. Müller and K. Wilmański, A model for phase transitions in pseudoelastic bodies, Il Nuovo Cimento, 57B (1980), pp. 283-318.
50. M. Ortiz, E. Repetto, and L. Stainier, A theory of subgrain dislocation structures, J. Mech. Phys. Solids, 48 (2000), pp. 2077-2114.
51. P. Plecháč and T. Roubíček, Visco-elasto-plastic model for martensitic phase transformation in shape-memory alloys, Math. Methods Appl. Sci., 25 (2002), pp. 1281-1298.
52. K. R. Rajagopal and T. Roubíček, On the effect of dissipation in shape-memory alloys, Nonlinear Anal. Real World Appl., 4 (2003), pp. 581-597.
53. K. R. Rajagopal and A. R. Srinivasa, On the inelastic behavior of solids - Part I: Twinning, Int. J. Plasticity, 11 (1995), pp. 653-678.
54. K. R. Rajagopal and A. R. Srinivasa, Inelastic behavior of materials - Part II: Energies associated with twinning, Int. J. Plasticity, 13 (1997), pp. 1-35.
55. K. R. Rajagopal and A. R. Srinivasa, Mechanics of inelastic behavior of materials, Part I, Int. J. Plasticity, 14 (1998), pp. 945-968.
56. K. R. Rajagopal and A. R. Srinivasa, Mechanics of inelastic behavior of materials, Part II, Int. J. Plasticity, 14 (1998), pp. 969-998.
57. X. Ren and L. Truskinovsky, Finite scale microstructures in nonlocal elasticity, J. Elasticity, 59 (2000), pp. 319-355.
58. R. Rogers and L. Truskinovsky, Discretization and hysteresis, Phys. B, 233 (1997), pp. 370-375.
59. T. Roubíček, Relaxation in Optimization Theory and Variational Calculus, W. de Gruyter, Berlin, 1997.
60. T. Roubíček, Dissipative evolution of microstructure in shape memory alloys, in Lectures on Applied Mathematics, H-J. Bungartz, R. H. W. Hoppe, and C. Zenger, eds., Springer, Berlin, 2000, pp. 45-63.
61. T. Roubíček, Evolution model for martensitic phase transformation in shapememory alloys, Interfaces Free Bound., 4 (2002), pp. 111-136.
62. T. Roubíček and M. Kružík, Numerical treatment of microstructure evolution modeling. in ENUMATH 97, H. G. Bock et al., eds., World Scientific, River Edge, NJ, 1998, pp. 532-539.
63. J. C. Simo, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition, Part I, Comput. Methods Appl. Mech. Engrg., 66 (1988), pp. 199-219.
64. J. C. Simo, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition, Part II, Comput. Methods Appl. Mech. Engrg., 68 (1988), pp. 1-31.
65. J. C. Simo, Computational Inelasticity, Springer, New York, 1998.
66. J. Svoboda and I. Turek, On diffusion-controlled evolution of closed solid-state thermodynamic systems at constant temperature and pressure, Philosoph. Mag. B, 64 (1991), pp. 749-759.
67. P. Thamburaja and L. Anand, Thermo-mechanically coupled superelastic response of initially-textured Ti-Ni sheet, Acta Materialia, 51 (2003), pp. 325-338.
68. F. Theil, Relaxation of rate-independent evolution problems, Prof. Roy. Soc. Edinburgh Sect. A, 132 (2002), pp. 463-481.