A strategy driven business process modelling approach

Business Process Management Journal

Volumn 11, Issue 6, 2005, Pages 628-649

  Nurcan, Selmin ^a   Etien, Anne ^a   Kaabi, Rim ^a   Zoukar, Iyad ^a   Rolland, Colette ^a  

^a UNIVERSITÉ PARIS 1 PANTHÉON SORBONNE   (France)

Author keywords

Business process re engineering; Modelling; Process management

Indexed keywords

EID: 27844585847     PISSN: 14637154     EISSN: None     Source Type: Journal    
DOI: 10.1108/14637150510630828     Document Type: Article

References (53)

1. Anton, A.I. (1996), "Goal based requirements analysis", Proceedings of the 2nd International Conference on Requirements Engineering ICRE'96, Colorado Springs, CO, pp. 136-44.
2. Antón, A.I., McCracken, W.M. and Potts, C. (1994), "Goal decomposition and scenario analysis in business process reengineering", Proceedings of the 6th International Conference on Advanced Information Systems Engineering (CAiSE '94), Utrecht, pp. 94-104.
3. Armenise, P., Bandinelli, S., Ghezzi, C. and Morzenti, A. (1993), "A survey and assessment of software process representation formalisms", International Journal of Software Engineering and Knowledge Engineering, Vol. 3 No. 3, pp. 410-26.
4. Arsanjani, A. and Alpigini, J. (2001), "Using grammar-oriented object design to seamlessly map business models to component-based software architectures", Proceedings of the International Symposium of Modelling and Simulation, Pittsburgh, PA, pp. 186-91.
5. Bandinelli, S., Fugetta, A. and Grigoli, S. (1993), "Process modelling in the large with SLANG", Proceedings of the 2nd International Conference on Software Process, Berlin, pp. 75-93.
6. Ben Achour, C. and Ncube, C. (2000), "Engineering the PORE method for COTS selection and implementation with the MAP process meta-model", Proceedings of the 6th International Workshop on Requirements Engineering Foundations of Software Quality (REFSQ'2000), Stockholm.
7. Boehm, B. (1976), "Software engineering", IEEE Transactions on Computers, Vol. C-25 No. 12, pp. 1226-41.
8. Bubenko, J. (1994), "Enterprise modeling", Ingénierie des Systèmes d'Information, Vol. 2 No. 6.
9. Bubenko, J., Rolland, C., Loucopoulos, P. and De Antonellis, V. (1994), "Facilitating 'fuzzy to formal' requirements modelling", Proceedings of the IEEE 1st Conference on Requirements Engineering, ICRE'94, Colorado Springs, CO and Taipei, pp. 154-8.
10. Cockburn, A. (2000), Writing Effective Use Cases, Addison-Wesley, New York, NY.
11. Dardenne, A., van Lamsweerde, A. and Fickas, S. (1993), "Goal directed requirements acquisition", Science of Computer Programming, Vol. 20 Nos 1/2, pp. 3-50.
12. Decker, S., Daniel, M., Erdmann, M. and Studer, R. (1997), "An enterprise reference scheme for integrating model based knowledge engineering and enterprise modeling", Proceedings of the 10th European Workshop on Knowledge Acquisition, Modeling and Management, EKAW'97, Springer-Verlag, Heidelberg, Lecture Notes in Artificial Intelligence, LNAI 1319.
13. Dik, S.C. (1989), The Theory of Functional Grammar, Foris Publications, Dodrecht.
14. D'Souza, D.F. and Wills, A.C. (2001), Objects, Components, and Frameworks with UML - The Catalysis Approach, Object Technology Series, Addison-Wesley, New York, NY.
15. ELEKTRA Consortium (1997), Esprit Program 7.1, Technologies for business processes, best business practice pilots. Elektra: Electrical Enterprise Knowledge For Transforming Applications Project No. 22927, available at: www.singular.gr/elektra, January 1997 to June 1999.
16. Eriksson, H-E. and Penker, M. (2000), Business Modeling with UML - Business Patterns at Work, Wiley, New York, NY.
17. Fillmore, C.J. (1968), "The case for case", in Bach, E. and Harms, R.T. (Eds), Universals in Linguistic Theory, Holt, Rinehart and Winston, Inc., San Diego, CA, pp. 1-88.
18. Hammer, M. (1990), "Reengineering work: don't automate obliterate", Harvard Business Review, Boston, MA, pp. 104-11.
19. Hammer, M. and Champy, J. (1993), Re-engineering the Corporation: A Manifesto for Business Revolution, Harper Collins Publishers, Inc., New York, NY.
20. Harel, D. (1990), "Statemate: a working environment for the development of complex reactive systems", IEEE Transactions on Software Engineering, Vol. 16 No. 4, pp. 403-14.
21. Jacobson, I., Christerson, M., Jonsson, P. and Overgaard, G. (1992), Object Oriented Software Engineering - A Use Case Driven Approach, Addison-Wesley, New York, NY.
22. Jackson, M. (1995), Software Requirements and Specifications, Addison-Wesley, New York, NY.
23. Jacobson, I., Booch, G. and Rumbaugh, J. (1999), Unified Software Development Process, Object Technology Series, Addison-Wesley, New York, NY.
24. Jarke, M. and Pohl, K. (1994), "Requirements engineering in 2001: managing a changing reality", IEEE Software Engineering Journal, Vol. 9 No. 6, pp. 257-66.
25. Jarzabek, S. and Ling, T.W. (1996), "Model-based support for business reengineering", Information and Software Technology, Vol. 38 No. 5, pp. 355-74.
26. Lee, J. (1991), "Extending the Potts and Bruns model for recording design rationale", Proceedings of the IEEE 13th International Conference on Software Engineering, Austin, TX, pp. 114-25.
27. McCarthy, D.R. and Sarin, S.K. (1993), "Workflow and transactions in inconcert", Bulletin of Technical Committee on Data Engineering, Vol. 16 No. 2, pp. 53-6.
28. Marca, D.A. and McGowan, C.L. (1993), IDEF0/SADT: Business Process and Enterprise Modeling, Eclectic Solutions, Inc., San Diego, CA.
29. Medina-Mora, R., Winograd, T., Flores, R. and Flores, F. (1992), "The action workflow approach to workflow management technology", Proceedings of the CSCW'92, ACM, Toronto, pp. 281-8.
30. Nurcan, S. and Rolland, C. (1997), "Meta-modelling for cooperative processes", Proceedings of the 7th European-Japanese Conference on Information Modelling and Knowledge Bases, Toulouse, pp. 361-77.
31. Nurcan, S. and Rolland, C. (2003), "A multi-method for defining the organisational change", Information and Software Technology, Vol. 45 No. 2, pp. 61-82.
32. Ould, M. (1995), Business Processes: Modelling and Analysis for Re-engineering and Improvement, Wiley, New York, NY.
33. Palermo, A.M. and McCready, S.C. (1992), "Workflow software: a primer", Proceedings of the Conference Groupware'92, Morgan-Kaufmann, San Mateo, CA, pp. 155-9.
34. Potts, C. (1997), "Fitness for use: the system quality that matters most", Proceedings of the Third International Workshop on Requirements Engineering: Foundation for Software Quality (REFSQ'97), Barcelona, pp. 15-28.
35. Prat, N. (1997), "Goal formalisation and classification for requirements engineering", Proceedings of the Third International Workshop on Requirements Engineering: Foundations of Software Quality REFSQ'97, Barcelona, pp. 145-56.
36. Ralyté, J. (2001), "Ingénierie des méthodes à base de composants", PhD thesis, University of Paris1, Panthéon-Sorbonne.
37. Ramesh, B. and Dhar, V. (1992), "Supporting systems development by capturing deliberations during requirements engineering", IEEE Transactions on Software Engineering, Vol. 18 No. 6, pp. 498-510.
38. Rolland, C. and Prakash, N. (2000), "Bridging the gap between organisational needs and ERP functionality", Requirements Engineering Journal, Vol. 5 No. 3, pp. 180-93.
39. Rolland, C. and Prakash, N. (2001), "Matching ERP system functionality to customer requirements", Proceedings of the 5th IEEE International Symposium on Requirements Engineering, Toronto, pp. 66-75.
40. Rolland, C., Nurcan, S. and Grosz, G. (1998c), "A unified framework for modelling co-operative design processes and co-operative business processes", Proceedings of the 31st Annual International Conference on System Sciences, Big Island, Hawaii, pp. 376-85.
41. Rolland, C., Salinesi, C. and Etien, A. (2003), "Eliciting gaps in requirements change", Requirements Engineering Journal.
42. Rolland, C., Souveyet, C. and Ben Achour, C. (1998b), "Guiding goal modelling using scenarios", IEEE Transactions on Software Engineering, Vol. 24 No. 12, pp. 1055-71.
43. Rolland, C., Loucopoulos, P., Grosz, G. and Nurcan, S. (1998a), "A framework for generic patterns dedicated to the management of change in the electricity supply industry", Proceedings of the 9th International DEXA Conference and Workshop on Database and Expert Systems Applications, Vienna, pp. 907-11.
44. Rolland, C., Loucopoulos, P., Kavakli, V. and Nurcan, S. (1999), "Intention based modelling of organisational change: an experience report", Proceedings of the Fourth CAISE/IFIP 8.1 International Workshop on Evaluation of Modeling Methods in Systems Analysis and Design (EMMSAD'99), Heidelberg.
45. Rumbaugh, J., Blaha, M., Premerlani, W., Eddy, F. and Lorensen, W. (1991), Object Oriented Modeling and Design, Prentice-Hall, New York, NY.
46. Rummler, G.A. and Brache, A.P. (1995), Improving Performance, Jossey-Bass Publishers, Indianapolis, IN.
47. Salinesi, C. and Presso, M.J. (2002), "A method to analyse changes in the realisation of business intentions and strategies for information system adaptation", Proceedings of the 6th IEEE International Enterprise Distributed Object Computing Conference (EDOC'02), Lausanne, pp. 84-95.
48. Salinesi, C. and Rolland, C. (2003), "Fitting business models to systems functionality exploring the fitness relationship", Proceedings of the 15th Conference on Advanced Information Systems Engineering (CAiSE'03), Klagenfurt/Velden, pp. 647-64.
49. Salinesi, C. and Wäyrynen, J. (2002), "A methodological framework for understanding IS adaptation through enterprise change", Proceedings of the 8th International Conference on Object-oriented Information Systems (OOIS'02), Montpellier, pp. 211-22.
50. Scheer, A.W., Jost, W. and Abolhassan, F. (2002), Business Process Excellence: Aris in Practice, Springer-Verlag, Berlin.
51. Van der AaLst, W. and Van Hee, K. (2002), Workflow Management: Models, Methods and Systems, MIT Press, Cambridge, MA.
52. Weidenhaupt, K., Pohl, K., Jarke, M. and Haumer, P. (1998), "Scenario usage in system development: a report on current practice", IEEE Software, Vol. 15 No. 2, CREWS Team, Best Paper Award at the 3rd International Conference on Requirements Engineering (ICRE'98), Colorado Springs, CO, pp. 33-45.
53. Yu, E.S.K. and Mylopoulos, J. (1994), "From E-R to 'A-R' - modelling strategic actor relationships for business process reengineering", Proceedings of the 13th International Conference on the Entity-Relationship Approach, Manchester, pp. 548-65.