An anisotropic damage-based plastic yield criterion and its application to analysis of metal forming process

International Journal of Mechanical Sciences

Volumn 47, Issue 12, 2005, Pages 1897-1922

  Shen, W ^a   Peng, L H ^a   Tang, C Y ^b  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

Continuity tensor; Damage equivalent stress; Erichsen cupping test; Metal forming process; Plastic yield criterion

Indexed keywords

ANISOTROPY; CONTINUUM MECHANICS; CRACKS; FINITE ELEMENT METHOD; PLASTIC DEFORMATION; PLASTICITY; STRESS ANALYSIS; TENSORS;

CONTINUITY TENSORS; DAMAGE EQUIVALENT STRESS; ERICHSEN CUPPING TEST; METAL FORMING PROCESS; PLASTIC YIELD CRITERION;

METAL FORMING;

EID: 27744604431     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2005.07.007     Document Type: Article

References (47)

1. R. Hill A theory of the yielding and plastic flow of anisotropic materials Proceedings of the Royal Society of London A193 1948 281 297
2. Z. Marciniak, and K. Kuczynski Limit strains in the process of stretch-forming sheet metal International Journal of Mechanical Sciences 9 1967 609 620
3. Z. Marciniak, K. Kuczynski, and T. Pokora Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension International Journal of Mechanical Sciences 15 1973 789 797
4. S. Storen, and J.R. Rice Localized necking in thin sheets Journal of Mechanics and Physics of Solids 23 1975 421 441
5. J.W. Hutchinson, and K.W. Neale Sheet necking II, time-independent behavior, mechanics of sheet metal forming 1978 Plenum Press New York p. 127-32
6. S. Imatani, M. Teraura, and T. Inoue An anisotropic yield function accounting for history effects J.P. Boehler Yielding and failure of anisotropic solids 1990 Mechanical Engineering Publications Limited London 729 745
7. A. Graf, and W.F. Hosford Calculations of forming limit diagrams Metallurgical Transactions A 21A 1990 87 94
8. R. Hill A user-friendly theory of orthotropic plasticity in sheet metals International Journal of Mechanical Sciences 35 1993 19 25
9. W.M. Sing, K.P. Rao, and K. Swaminathan Influence of limit stress states and yield criteria on the prediction of forming limit strains in sheet metals Metallurgical and Materials Transactions A 28A 1997 2323 2333
10. M. Gotoh A theory of plastic anisotropic based on a yield function of fourth order 1 and 2 International Journal of Mechanical Sciences 19 1977 505 515
11. F. Barlat, and J. Lian Plastic behavior and stretchability of sheet metal, part 1: a yield function for orthotropic sheets under plane stress conditions International Journal of Mechanical Sciences 5 1989 51 58
12. C. Ferron, R. Makkouk, and J. Morreale A parametric description of orthotropic plasticity in metal sheet International Journal of Plasticity 10 1994 431 439
13. J. Savoie, M. Jain, A.R. Carr, P.D. Wu, K.W. Neale, and Y. Zhou Predictions of forming limit diagrams using crystal plasticity models Materials Science Engineering A257 1998 128 133
14. F.A. McClintock A criterion for ductile fracture by the growth of holes Journal of Applied Mechanics 35 1968 363 368
15. J.R. Rice, and D.M. Tracey On the ductile enlargement of voids in triaxial stress fields Journal of Mechanics and Physics of Solids 17 1969 201 217
16. A.K. Ghosh A criterion for ductile fracture in sheets under biaxial loading Metallurgical Transactions A 7A 1976 523 533
17. M. Jain, J. Allin, and D.J. Lloyd Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet International Journal of Mechanical Sciences 41 1999 1273 1288
18. H. Lee, K. Peng, and J. Wang An anisotropic damage criterion for deformation instability and its application to forming limit analysis of metal plates Engineering Fracture Mechanics 21 1985 1031 1054
19. C.L. Chow, and J. Wang An anisotropic theory of elasticity of continuum damage mechanics International Journal of Fracture 33 1987 3 16
20. C.L. Chow, L.G. Yu, and M.Y. Demeri An unified damage mechanics for ductile facture ASME Journal of Engineering Materials and Technology 119 1997 346 353
21. W.H. Tai Plastic damage and ductile fracture in mild steel Engineering Fracture Mechanics 37 1990 853 880
22. W.B. Lee, W.H. Tai, and C.Y. Tang Damage evolution and forming limit predictions of an Al2024-T3 aluminum alloy Journal of Materials Processing Technology 63 1997 100 104
23. C.Y. Tang, W. Shen, and T.C. Lee Fracture limit prediction of aluminum alloy sheet by damage mechanics approach A.M.S. Hamouda Advances in materials processing and technologies vol. 2 1998 638 644
24. Tang CY, Shen W, Lee TC, Fung LC. Development of an anisotropic elasto-plastic damage model for fracture limit prediction. In: Proceedings of the eighth international manufacturing conference. Singapore, 1998. p. 55-60.
25. C.Y. Tang, W. Shen, and T.C. Lee A damage-based criterion for fracture prediction in metal forming processes: a case study in Al 2024T3 sheet Journal of Materials Processing Technology 1999 79 83
26. C.Y. Tang, C.L. Chow, W. Shen, and W.H. Tai Development of a damage-based criterion for ductile fracture prediction in sheet metal forming Journal of Materials Processing Technology 91 1999 270 277
27. C.Y. Tang, W. Shen, L.C. Fung, and T.C. Lee Second-order continuity tensor and stiffness degradation of aluminum alloy 2024T3 under large strain at room temperature International Journal of Mechanical Sciences 42 2000 87 105
28. C.Y. Tang, W. Shen, K.C. Chan, and T.C. Lee A damage model for fracture prediction of super-plastic aluminum composite sheet Journal of Materials Processing Technology 2002 301 307
29. L.M. Kachanov Time of the rupture process under creep conditions Izvestiya Akademic Nauk SSSR Otdelenie Technicheskikh Nauk 8 1958 26 31
30. Z.H. Lu, and D. Lee Prediction of history-dependent forming limits by applying different hardening models International Journal of Mechanical Sciences 29 2 1987 123 137
31. M. Gotoh Improvements of J2-deformation theory and their application to FEM analysis of large elastic-plastic deformation JSME International Journal Series I 33 1990 209 219
32. E. Nakamachi Sheet-forming process characterization by static-explicit anisotropic elastic-plastic finite element simulation Journal of Materials Processing Technology 50 1995 116 132
33. T. Yoshida, T. Kayayama, and M. Usuda Forming-limit analysis of hemispherical punch stretching using the three-dimensional finite element method Journal of Materials Processing Technology 50 1995 226 237
34. N. Boudeau, and J.C. Gelin Prediction of the localized necking in 3D sheet metal forming process from FE simulations Journal of Materials Processing Technology 45 1994 229 235
35. M. Oyane, T. Sato, K. Okimoto, and S. Shima Criteria for ductile fracture and their applications Journal of Mechanical Working Technology 4 1980 65 81
36. H. Takuda, K. Mori, N. Takakura, and K. Yamaguchi Finite element analysis of limit strains in bi-axial stretching of sheet metals allowing for ductile fracture International Journal of Mechanical Sciences 42 2000 785 798
37. H. Takuda, K. Mori, H. Fujimoto, and N. Hatta Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion Journal of Materials Processing Technology 60 1996 291 296
38. B.P.P.A. Gouveia, J.M.C. Rodrigues, and P.A.F. Martins Fracture predicting in bulk metal forming International Journal of Mechanical Sciences 38 4 1996 361 372
39. Z. Tourki, A. Zeghloul, and G. Ferron Sheet metal forming simulations using a new model for orthotropic plasticity Computational Materials Science 5 1996 255 262
40. L.M. Kutt, A.B. Pifko, J.A. Nardiello, and J.M. Papazian Slow-dynamic finite element simulation of manufacturing process Computers and Structures 66 1 1998 1 17
41. S.W. Lee, J.W. Yoon, and D.Y. Yang A stress integration algorithm for plan stress elasto-plasticity and its application to explicit finite element analysis of sheet metal forming process Computers and Structures 66 2-3 1998 301 311
42. C.L. Chow, and W.H. Tai Damage based formability analysis of sheet metal with LS-DYNA International Journal of Damage Mechanics 9 2000 241 254
43. J. Lemaitre Coupled elasto-plasticity and damage constitutive equations Computational Methods in Applied Mechanics and Engineering 51 1985 31 49
44. J. Lemaitre A course on damage mechanics 2nd ed 1992 Springer Berlin
45. J.P. Boehlers Anisotropic localization of plastic deformation 1991 Elsevier Applied Science Amsterdam
46. L.H. Peng, W. Shen, C.L. Chow, and A. Asundi Damage field and its evolution in a glass-fiber cloth/epoxy composite plate with a central hole Engineering Fracture Mechanics 39 1991 259 268
47. C.Y. Tang, L.H. Peng, C.C. Li, W. Shen, and C.P. Tsui Experimental study on stable growth of crack and craze damage in HIPS under tension at room temperature Polymer Testing 20 2001 241 251