Assessment of amorphous carbon coating for artificial joints application

Tribology and Lubrication Technology

Volumn 61, Issue 10, 2005, Pages 40-48

  Ajayi, Oyelayo O ^a   Soppet, M J ^a   Erdemir, Ali ^a   Fenske, George R ^a   Shi, Bing ^b   Liang, Hong ^b  

^a ARGONNE NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF ALASKA FAIRBANKS   (United States)

Author keywords

Carbon coatings; Ceramics; Friction; Hip implant; UHMWPE; Wear

Indexed keywords

AMORPHOUS MATERIALS; CARBON; CERAMIC COATINGS; DURABILITY; HIP PROSTHESES; IMPLANTS (SURGICAL); INTERFACES (MATERIALS); RELIABILITY; SURGERY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS; WEAR RESISTANCE;

AMORPHOUS COATING; BOVINE SERUM; CARBON COATINGS; OSTEOLYSIS;

TRIBOLOGY;

WEAR RESISTANCE;

EID: 27744541320     PISSN: 00247154     EISSN: None     Source Type: Trade Journal    
DOI: None     Document Type: Article

References (27)

1. Dowson, D. (1992), "Friction and Wear of Medical Implants and Prosthetic Devices," ASM International Handbook, Vol. 18, Friction, Lubrication and Wear Technology, Ed. Blau, P.J., ASM International, Materials Park, Ohio, pp. 656-664.
2. Unsworth, A., Dowson, D. and Wright, V. (1975), "Friction Behavior of Human Synovial Joints-Natural Joints," J. Lub. Tech. Trans. ASME, 97, pp. 360-376.
3. Greenwald, A.S., Bauer, T.W. and Ries, M.D., (2001), "New Polys for Old: Contribution or Caveat," J. Bone Joint Surg Am.,83, Suppl. 2, pp. 27-31.
4. Goater, J.J., O'Keefe, R.J., Rosier, R.N., Puzas, J.E. and Schwarz, E.M. (2002), "Efficiency of Ex-Vivo OPG Gene Therapy in Preventing Wear Debris Induced Osteolysis," J. Ortho. Res., 20, pp. 169-173.
5. Sauer, W.L. and Anthony, M.E. (1998), "Predicting the Clinical Wear Performance of Orthopaedic Bearing Surfaces," Alternative Bearing Surfaces in Total Joint Replacement, Jacobs, J.J. and Craig, T.L. ASTM.
6. McGee, M.A., Howie, D.W., Coste, K., Haynes, D.R., Wildenaver, C.I.,Pearcy, M.J. and McLean, J.D. (2000), Ιmplant Retrieval Studies of the Wear and Loosening of Prosthetic Joints: A Review," Wear, 241, pp. 158-165.
7. Jacobs, J.J., Roebuck, K.A., Archibeck, M., Hallab, N.J. and Glant, T.T. (2001), "Osteolysis: Basic Science," Clim-Orthop Rel. Res., 393, pp. 71-77.
8. Harris, W.H. (2001), "Wear and Periprosthetic Osteolysts," Clin. orthop. Rel. Res., 393, pp. 66-70.
9. Glant, T.T. and Jacobs, J.J. (1994), "Response of Three Murine Macrophage Populations to Particulate Debris: Bone Resorption in Organ Cultures," J. Orthop. Res., 12, pp. 720-731.
10. Shanbhag, A.S., Jacobs, J.J. and Black, J. (1995), "Human Monocyte Response to Particulate Biomaterial Generated in Vivo and in Vitro," J. Orthop. Res., 13, pp. 792-801.
11. Wang, A. (2001), "A Unified Theory of Wear for UHMWPE in Multi-directional Sliding, " Wear, 248, pp. 38-47.
12. McKellop, H.A., Campbell, P., Park, S.H., Schmalzried, T.P., Grigoris, P., Amstutz, H.C. and Sarmiento, A. (1995), "The Origin of Submicron Polyethylene Wear Debris in Total Hip Arthroplasty," Clin. Orthop. Rel. Res., 311, pp. 3-20.
13. Nusbaum, H.J., Rose, R.M., Paul, L, Crugnola, A.M. and Radin, E.L. (1979), "Wear Mechanisms for UHMWPE in Total Hip Prostheses, " J. Appl. Polym. Sci, 23, pp.777-789.
14. Oonishi, H., Ishimaru, H. and Kato, A. (1996), "Effect of Cross-Linkage by Gamma Radiation in Heavy Doses to Low Wear Polyethylene in Total Hip Prostheses," J.Mater. Sci. in Med., 7, pp. 753-763.
15. Muratoglu, O.K., Bragdon, C.R., O'Conner, D.O., Jasty, W.J., Gul, M.R. and McGarry, F. (1999), "Unified Wear Model for Highly Crosslinked UHMWPE," Biomaterials, 20,pp. 1463-1470.
16. Shen, F.W., McKellop, H.A. and Salovey, R. (1998), "Improving the Resistance to Wear and Oxidation of Acetabular Cups of UHMWPE by Gamma Radiation Crosslinking and Remelting," in Trans. 23rd Society Congress on Biomaterials, p. 3.
17. Bizot, P., Nizard, R., Hamadouche, M., Hannouche, D. and Sedel, L. (2001), "Prevention of Wear and Osteolysis," Clin. Orthop. Rel. Res., 393, pp. 85-93.
18. Dorr, L.D., Wau, Z., Longjohn, D.B., Dubois, B. and Murken, R. (2GOO), "Total Hip Arthroplasty with Use of the Metalon-Metal Articulation," J. Bone and Joint Surg., 82-A, pp. 789-798.
19. Archiback, M.J., Jacobs, J.J and Black, J. (2000), "Alternate Bearing Surfaces in Total Joint Arthroplasty," Clin. Orthop. Rel. Res., 379, pp. 12-21.
20. Jazrawi, L.M., Kummer, F.J. and Dicesare, P.E. (1998), "Alternative Bearing Surfaces for Total Joint Arthroplasty, J. Am. Acad. Orthop. Surg. 6, pp. 198-203.
21. Evans, C.H,, Ghirizzavi, S.C., Kang, R., Muzzonigro, T., Wasko, M.C. and Herdon, J.H. (1999), "Gene Therapy for Rheumatic Diseases," Arthritis Rheum., 42, pp. 1-16.
22. Haynes, D.R., Rogers, S.D. and Howie, D.W. (1996), "Drug Intribution of the Macrophage Response to Metal Wear Particles in Vitro," Clin. Orthop., 323, pp. 316-326.
23. Erdemir, A., Eryilmaz, O.L. and Fenske, G.R. (2000), "Synthesis of Diamod-like Carbon Films with Superlow Friction and Wear Properties," J. Vac. Sci. Tech., A18, pp. 1987-1992.
24. Erdemir, A., Eryilmaz, O.L., Nilufer, I.B. and Fenske, G.R. (2000), "Synthesis of Super Low Friction Carbon Films from Highly Hydrogenated Methane Plasmas," Surf. Coat. Techno., 133-134, pp. 448-454.
25. Wang, A., Polineni, V.K., Essner, A., Sokol, M., Sun, D.C., Stark, C.and Dumbleton, J.H. (1997),"The Significance of Nonlinear Motion in Wear Screen of Orthopaedic Implant Materials," J. Testing and Evaluation, 25, pp. 239-245.
26. Saikko, V. and Keranen, J. (2002), "Wear Simulation of Aluminaon-Alumina Prosthetic Hip Joints Using a Multidirectional Motion Pin-on-Disc Device," J. Am. Ceram. Soc. 85, pp. 2785-2791.
27. Brodbeck, W.G., Patel, J., Voskerician, G., Clinstenson, E., Shive, M.S., Nakayama, Y., Matsuda, T., Ziats, N.P. and Anderson, J.M. (2002), "Biomaterial Adherent Macrophage Apoptosis is Increased by Hydrophilic and Anionic Substrates In Vivo," Proc. Nat. Acad. Sci., 99, pp. 10287-10292.