Advantages of SiC Hi-nicalon or NLM 202 fibers in SiC f-SiBC composites

Journal of the American Ceramic Society

Volumn 88, Issue 7, 2005, Pages 1967-1972

  Darzens, Severine ^a,c   Chermant, Jean Louis ^b,c   Sangleboeuf, Jean Christophe ^b,d  

^a CNRS   (France)

^b UNIVERSITÉ DE RENNES 1   (France)

^c AMERICAN CERAMIC SOCIETY   (United States)

^d PRINCETON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP RESISTANCE; MICROGRAPHS; OPERATING TEMPERATURE; STRESS LEVEL;

ARGON; COMPOSITE MATERIALS; CREEP TESTING; FIBERS; SCANNING ELECTRON MICROSCOPY; STRAIN RATE; TENSILE TESTING;

SILICON CARBIDE;

EID: 27644495825     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2005.00241.x     Document Type: Article

References (39)

1. Nippon Carbon: Nicalon Fiber Information (1998).
2. Ube: Tyranno Fiber Information (1997).
3. J. Lipowitz, J. A. Rabe, A. Zangvil, and Y. Xu, "Structure and Properties of SYLRAMIC™ Silicon Carbide Fiber - A Polycrystalline, Stoichiometric β-SiC Composition," Ceram. Eng. Sci. Proc., 18 [3] 147-57 (1997).
4. J. A. DiCarlo, H. M. Yun, and J. C. Goldsby, "Creep and Rupture of Advanced SiC Fibers;" pp. 315-22 in Proceedings of ICCM-10, Vol. VI, Whistler, BC, Canada. Edited by A. Poursartip and K. Street. Woodhouse Publ. Ltd., Whistler, British Columbia, Canada, August 1995.
5. L. A. Giannuzzi, K. L. Rugg, and R. E. Tressler, "High Temperature Strength and Creep Behavior of Carborundum Alpha Silicon Carbide Fibers," Ceram. Trans., 38, 655-66 (1995).
6. P. Le Coustumer, M. Monthioux, and A. Oberlin, "Understanding Nicalon Fibre," J. Eur. Ceram. Soc., 11, 95-103 (1993).
7. f-SiBC;" Thèse de Doctorat of the University of Caen, 2000.
8. C. Laffon, A. M. Flank, P. Lagarde, M. Laridjani, R. Hagège, P. Olry, J. Cotteret, J. Dixmier, J. L. Miquel, H. Hommel, and A. P. Legrand, "Study of Nicalon-Based Ceramic Fibers and Powders by EXAFS Spectrometry, X-Ray Diffractometry and Some Additional Methods," J. Mater. Sci., 24, 1503-12 (1989).
9. T. Shimoo, J. Tsukada, T. Seguchi, and K. Okamura, "Thermal Stability of Low SiC Fiber (Hi-Nicalon) Treated in a Hot Isostatic Press," J. Am. Ceram. Soc., 82 [12] 3508-12 (1999).
10. M. Takeda, J. Sakamoto, A. Saeki, Y. Imai, and H. Ichikawa, "High Performance Silicon Carbide Fiber Hi-Nicalon for Ceramic Matrix Composites," Ceram. Eng. Sci. Proc., 16 [5] 37-44 (1995).
11. H. Ichikawa, K. Okamura, and T. Seguchi, "Oxygen-Free Ceramic Fibers from Organosilicon Precursors and E-Beam Curing," Ceram. Trans., 58, 65-76 (1995).
12. M. H. Berger, N. Hochet, and A. R. Bunsell, "Microstructure and Thermo-Mechanical Stability of a Low-Oxygen Nicalon Fibre," J. Microsc., 177 [3] 230-41 (1995).
13. T. Shimoo, F. Toyoda, and K. Okamura, "Thermal Stability of Low-Oxygen Silicon Carbide Fiber (Hi-Nicalon) Subjected to Selected Oxidation Treatment," J. Am. Ceram. Soc., 83 [6] 1450-6 (2000).
14. M. H. Berger, N. Hochet, and A. R. Bunsell, "Properties and Microstructures of Small-Diameter SiC-Based Fibers;" pp. 231-90 in Fine Ceramic Fibers, Edited by A. R. Bunsell and M. H. Berger. Marcel Dekker Inc., New York, 1999.
15. H. Serizawa, C. A. Lewinsohn, G. E. Youngblood, R. H. Jones, D. E. Johnston, and A. Kohyama, "High Temperature Properties and Creep Resistance of Near-Stoichiometric SiC Fibers," Ceram. Eng. Sci. Proc., 20 [4] 443-50 (1999).
16. N. Hochet, M. H. Berger, and A. R. Bunsell, "Microstructural Evolution of the Latest Generation of Small-Diameter SiC-Based Fibres Tested at High Temperatures," J. Microsc., 185 [part 2] 243-58 (1997).
17. A. R. Bunsell and M. H. Berger, "Fine Diameter Ceramic Fibres," J. Eur. Ceram. Soc., 20 [13] 2249-60 (2000).
18. M. Takeda, J. Sakamoto, A. Saeki, and H. Ichikawa, "Mechanical and Structural Analysis of Silicon Carbide Fiber Hi-Nicalon Type S," Ceram. Eng. Sci. Proc., 17 [4] 35-42 (1996).
19. H. Ichikawa, "Recent Advances in Nicalon Fibres Including Hi-Nicalon Type S," Ann. Chim. Sci. Mater., 25, 523-8 (2000).
20. F. Christin, R. Naslain, and C. Bernard, "A Thermodynamic and Experimental Approach of Silicon Carbide CVD. Application to the CVD-Infiltration of Porous Carbon-Carbon Composites;" pp. 499-514 in Proceedings of the 7th International Conference on CVD, Edited by T. O. Sedwick and H. Lydtin. The Electrochemical Society, Princeton, 1979.
21. S. Goujard and L. Vandenbulcke, "Deposition of Si-B-C Materials from the Vapor Phase for Applications in Ceramic Matrix Composites," Ceram. Trans., 46, 925-35 (1994).
22. W. E. Luecke and S. M. Wiederhorn, "Interlaboratory Verification of Silicon Nitride Creep Properties," J. Am. Ceram. Soc., 80, 831-8 (1997).
23. W. E. Luecke, "Results of an International Round-Robin for Tensile Creep Rupture of Silicon Nitride," J. Am. Ceram. Soc., 85 [2] 408-14 (2002).
24. G. Boitier, H. Cubero, and J. L. Chermant, "Some Recommendations for Long Term High Temperature Tests;" pp. 309-12 in High Temperature Ceramic Matrix Composites, HT-CMC3, CSJ Series, Vol. 3, The Ceramic Society of Japan. Trans Tech Publications Ltd, Uetikon-Zuerich, Osaka, Japan, 1999.
25. G. Boitier, H. Maupas, H. Cubero, and J. L. Chermant, "Sur les Essais de Traction à Longs Termes à Haute Température, " Rev. Comp. Mat. Avancés, 7, 143-72 (1997).
26. M. G. Jenkins, S. M. Wiederhorn. and R. K. Shiffer, Creep Testing of Advanced Ceramics, pp. 171-222. Marcel Dekker, New York, 1998.
27. B. Marshall and A. G. Evans, "Failure Mechanisms in Ceramic-Fiber/Ceramic Matrix Composites," J. Am. Ceram. Soc., 68, 225-31 (1985).
28. M. D. Thouless, O. Sbaizero, L. S. Sigl, and A. G. Evans, "Effect of Interface Mechanical Properties on Pullout in a SiC-Fiber-Reinforeed Lithium Aluminum Silicate Glass-Ceramic," J. Am. Ceram. Soc., 72 [4] 525-32 (1989).
29. F. W. Zok and C. L. Hom, "Large Scale Bridging in Brittle Matrix Composites," Acta Metall. Mater., 38, 1895-904 (1990).
30. L. Kachanov, "Rupture Time Under Creep Conditions," Izv Akad Nauk SSR, 8, 26-31 (1958).
31. M. Rabotnov, Creep Problem in Structural Members. North-Holland, Amsterdam, 1969.
32. f-SiBC Composites," Scripta Mater., 47 [7] 433-9 (2002).
33. G. Boitier, S. Darzens, L. Chermant, M. Coster, and J. L. Chermant, "Damage Quantification of CMCs by Image Analysis;" pp. 511-6 in High Temperature Ceramic Matrix Composites, HT-CMC4, Edited by W. Krenkel, R. Naslain, and H. Schneider. Wiley-VCH, Weinhein, Germany, 2001.
34. N. Hochet, "Evolution en Température des Proprié tés Mécaniques et de la Microstructure de Fibres de Dernière Génération à Base de Carbure de Silicium;" Thèse de Doctorat of the Ecole Nationale Supérieure des Mines of Paris, 1996.
35. P. Carrère, "Comportement Thermomécanique d'un Composite de Type SiC/SiC;" Thèse de Doctorat of the University of Bordeaux I, 1996.
36. R. Bodet, "Comportement à la Rupture à Chaud et en Fluage, Évolution Microstructurale de Fibres Issues de Précurseurs Organosiliciés;" Thèse de Doctorat of the University of Bordeaux I, 1993.
37. J. L. Chermant, "Creep Behavior of Ceramic Matrix Composites," Sil. Ind., 60, 261-73 (1995).
38. J. L. Chermant, G. Boitier, S. Darzens, G. Farizy, J. Vicens, and J. L. Sangleboeuf, "Ceramic Composites for High Temperature Applications: Creep Point of View," J. Eur. Ceram. Soc., 22 [14-15] 2443-60 (2002)
39. (in Structural Ceramics and Ceramic Composites for High Temperature Applications, Euro Conference, Sevilla, Spain, Oct. 7-12, 2001).