Mode-II fracture in E-glass-polyester composite

Journal of Composite Materials

Volumn 39, Issue 19, 2005, Pages 1747-1768

  Szekrényes, András ^a   Uj, József ^a  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

Author keywords

Crack tip deformation; Delamination; End loaded split; Over notched flexure; Strain energy release rate; Transverse shear

Indexed keywords

CALIBRATION; DATA REDUCTION; FRACTURE; GLASS; POLYESTERS; STRAIN RATE;

CRACK TIP DEFORMATION; END-LOADED SPLIT; OVER-NOTCHED FLEXURE; STRAIN ENERGY RELEASE RATE; TRANSVERSE SHEAR;

COMPOSITE MATERIALS;

EID: 27544507926     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/0021998305051120     Document Type: Article

References (34)

1. Schuecker, C. and Davidson, B.D. (2000). Evaluation of the Accuracy of the Four-point Bend End-notched Flexure Test for Mode II Delamination Toughness Determination, Composites Science and Technology, 60: 2137-2146.
2. Todo, M., Takamura, T. and Takahashi, K. (1999). Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites Under Static and Dynamic Loading Conditions, Journal of Reinforced Plastics and Composites, 18: 1415-1427.
3. Tsai, J.L., Guo, C. and Sun, C.T. (2001). Dynamic Delamination Fracture Toughness in Unidirectional Polymeric Composites, Composites Science and Technology, 61: 87-94.
4. Stevanovic, D., Jar, P.-Y.B., Kalyanasundaram, S. and Lowe, A. (2000). On Crack-initiation Conditions for Mode I and Mode II Delamination Testing of Composite Materials, Composite Science and Technology, 60: 1879-1887.
5. Aksoy, A. and Carlsson, L.A. (1992). Interlaminar Shear Fracture of Interleaved Graphite/epoxy Composites, Composites Science and Technology, 43: 55-69.
6. Davies, P., Casari, P. and Carlsson, L.A. (2005). Influence of Fiber Volume Fraction On Mode II Interlaminar Fracture Toughness of Glass/epoxy Using the 4ENF Specimen, Composites Science and Technology, 65: 295-300.
7. Davies, P., Ducept, F., Brunner, A.J., Blackman, B.R.K. and de Morais, A.B. (1996). Development of a Standard Mode II Shear Fracture Test Procedure, In: Proceedings of the 7th European Comference on Composite Materials (ECCM-7), London, May 1996, Vol. 2, pp. 9-15.
8. Hashemi, S., Kinloch, J. and Williams, J.G. (1990). The Effects of Geometry, Rate and Temperature on Mode I, Mode II and Mixed-mode I/II Interlaminar Fracture Toughness of Carbon-fibre/Poly(Ether-Ether Ketone) Composites, Journal of Composite Materials, 24: 918-956.
9. Hashemi, S., Kinloch, J. and Williams, J.G. (1990). Mechanics and Mechanisms of Delamination in a Poly(Ether Sulphone)-Fibre Composites, Composites Science and Technology, 37: 429-462.
10. Wang, H. and Vu-Khanh, T. (1996). Use of End-loaded-split (ELS) Test to Study Stable Fracture Behaviour of Composites Under Mode-II Loading, Composite Structures, 36: 71-79.
11. Tanaka, K., Yuasa, T. and Katsura, K. (1998). Continuous Mode II Interlaminar Fracture Toughness Measurement by Over Notched Flexure Test, In: Proceedings of the 4th European Conference on Composites: Testing and Standardization, pp. 171-179.
12. Wang, W.-X., Takao, Y. and Nakata, M. (2003). Effects of Friction on the Measurement of the Mode II Interlaminar Fracture Toughness of Composite Laminates, In: Proceedings of the 14th International Conference on Composite Materials, San Diego, California, USA, July 14-18.
13. Qiao, P., Wang, J. and Davalos, J.F. (2003). Analysis of Tapered ENF Specimen and Characterization of Bonded Interface Fracture Under Mode-II Loading, International Journal of Solids and Structures, 40: 1865-1884, Corrigendum, 40: 4091.
14. Wang, J. and Qiao, P. (2003). Fracture Toughness of Wood-wood and Wood-FRP Bonded Interfaces Under Mode-II Loading, Journal of Composite Materials, 37: 875-898.
15. Ozdil, F., Carlsson, L.A. and Davies, P. (1998). Beam Analysis of Angle-ply Laminate End-notched Flexure Specimens, Composites Science and Technology, 58: 1929-1938.
16. Carlsson, L.A., Gillespie, J.W. and Pipes, R.B. (1986). On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing, Journal of Composite Materials, 20: 594-604.
17. Olsson, R. (1992). A Simplified Improved Beam Analysis of the DCB Specimen, Composites Science and Technology, 43: 329-338.
18. Ozdil, F. and Carlsson, L.A. (1999). Beam Analysis of Angle-ply Laminate DCB Specimens, Composites Science and Technology, 59: 305-315.
19. Chatterje, S.N. (1991). Analysis of Test Specimens for Interlaminar Mode II Fracture Toughness, Part 1. Elastic Laminates, Journal of Composite Materials, 25: 470-493.
20. Ding, W. and Kortschot, M.T. (1999). A Simplified Beam Analysis of the End Notched Flexure Mode II Delamination Specimen, Composite Structures, 45: 271-278.
21. Wang, J. and Qiao, P. (2004). Novel Beam Analysis of the End Notched Flexure Specimen for Mode-II Fracture, Engineering Fracture Mechanics, 71: 219-231.
22. Wang, J. and Qiao, P. (2004). Interface Crack Between two Shear Deformable Elastic Layers, Journal of the Mechanics and Physics of Solids, 52(4): 891-905.
23. Qiao, P. and Wang, J. (2004). Mechanics and Fracture of Crack-tip Deformable Bimaterial Interface, International Journal of Solids and Structures, 41(26): 7423-7444.
24. Wang, Y. and Williams, J.G. (1992). Corrections for Mode II Fracture Toughness Specimens of Composite Materials, Composites Science and Technology, 43: 251-256.
25. Bao, G., Ho, S., Suo, Z. and Fan, B. (1992). The Role of Material Orthotropy in Fracture Specimens for Composites, International Journal of Solids and Structures, 29: 1105-1116.
26. Davies, P., Kausch, H.H., Williams, J.G., Kinloch, A.J., Charalambides, M.N., Pavan, A., Moore, D.R., Prediger, R., Robinson, I., Burgoyne, N., Friedrich, K., Wittich, H., Rebelo, C.A., Torres Marques, A., Ramsteiner, F., Melve, B., Fischer, M., Roux, N., Martin, D., Czarnocki, P., Neville, D., Vepoest, I., Goffaux, B., Lee, R., Walls, K., Trigwell, N., Partridge, I.K., Jaussaud, J., Andersen, S., Giraud, Y., Hale, G. and McGrath, G. (1992). Round-robin Interlaminar Fracture Testing of Carbon-fibre-reinforced Epoxy and PEEK Composites, Composites Science and Technology, 43: 129-136.
27. Schön, J. (2000). Coefficient of Friction of Composite Delamination Surfaces, Wear, 237: 77-89.
28. Yang, Z. and Sun, C.T. (2000). Interlaminar Fracture Toughness of a Graphite/epoxy Multidirectional Composite, Journal of Engineering Materials and Technology, 122: 428-433.
29. Davidson, B.D. and Sundararaman, V. (1996). A Single Leg Bending Test for Interfacial Fracture Toughness Determination, International Journal of Fracture, 78: 193-210.
30. Davidson, B.D. and Koudela, K.L. (1999). Influence of the Mode Mix of Precracking on the Delamination Toughness of Laminated Composites, Journal of Reinforced Plastics and Composites, 18: 1408-1414.
31. Polaha, J.J., Davidson, B.D., Hudson, R.C. and Pieracci, A. (1996). Effects of Mode Ratio, Ply Orientation and Precracking on the Delamination Toughness of a Laminated Composite, Journal of Reinforced Plastics and Composites, 15: 141-173.
32. de Morais, A.B., Rebelo C.C., de Castro, P.M.S.T., Marques, T. and Davies, P. (2004). Interlaminar Fracture Studies in Portugal: Past, Present and Future, Fatigue and Fracture of Engineering Materials and Structures, 27: 767-773.
33. Thamm, F. (1985). Strength of Plastic Materials II. Budapest Coursebook Publisher, Budapest (in hungarian).
34. Dahlen, C. and Springer, G.S. (1994). Delamination Growth in Composites Under Cyclic Loads, Journal of Composite Materials, 28: 732-781.