Development of local material properties in Al 99.7 and AlMg0.5Si after severe plastic deformation by ECAP;Lokale Eigenschaftsentwicklung von Al99,7 und AlMg0,5Si nach hochgradig plastischer Verformung durch ECAP

Materialpruefung/Materials Testing

Volumn 47, Issue 10, 2005, Pages 601-609

  Meyer, Lothar W ^a,b   Hockauf, Matthias ^a,b   Krüger, Lutz ^a,c  

^a TU Chemnitz ^*

^b CHEMNITZ UNIVERSITY OF TECHNOLOGY   (Germany)

^c Nordmetall GmbH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRON MICROSCOPY; LOADS (FORCES); METAL PRESSING; PLASTIC DEFORMATION; STRENGTH OF MATERIALS; THERMAL EFFECTS;

CONTACT FRICTION; HARDENING CAPABILITY; MATERIAL PROPERTIES; ROOM TEMPERATURE;

ALUMINUM ALLOYS;

EID: 27544436208     PISSN: 00255300     EISSN: None     Source Type: Journal    
DOI: 10.3139/120.100694     Document Type: Review

References (31)

1. Yamazaki, D.; Karato, S. I.: High pressure rotational apparatus to 15 GPa, Review of Scientific Instruments 72 (2001), Nr. 11, S. 4207-4211
2. Tsuji, N.; Saito, Y.; Lee, S. H.; Minamino, Y.: ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials, Adv. Eng. Mater. 5 (2003), S. 338-344
3. Huang, J. Y.; Zhu, Y. T.; Jiang, H.; Lowe, T. C.: Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening, Act. Mater. 49 (2001), S. 1497-1505
4. Saito, Y.; Utsunomiya, H.; Suzuki, H.; Sakai, T.: Improvement in the R-Value of Aluminum strip by a continuous shear deformation process, Scr. Mater. 42 (2000), S. 1139-1144
5. Han, J. H.; Seok, H. K.; Chung, Y. H.; Shin, M. C.; Lee, J. C.: Texture evolution of the strip cast 1050 Al alloy processed by continuous confined strip shearing and its formability evaluation, Mater. Sci. Eng. A 323 (2002), S. 342-347
6. Raab, G. J.; Valiev, R. Z.; Lowe, T. C.; Zhu, Y. T.: Continuous processing of ultra-fine grained Al by ECAP-conform, Mater. Sci. Eng. A 382 (2004), S. 30-34
7. Segal, V. M.; Reznikov, V. I.; Drobyshevskiy, E. A.; Kopylov, V. I.: Plastic working of metals by simple shear, Russian Metallurgy 1 (1981), S. 99-105
8. Iwahashi, Y.; Wang, J.; Nemoto, M.; Horita, Z.; Langdon, T. G.: Principle of equal channel angular pressing for the processing of ultra-fine grained materials, Scr. Mater. 35 (1996), S. 143-146
9. Baik, S. C.; Estrin, Y.; Kim, H. S.; Jeong, H. T.; Hellmig, R. J.: Calculation of Deformation Behavior and Texture Evolution During Equal Channel Angular Pressing of If Steel Using Dislocation Based Modeling of Strain Hardening, Textures of Materials Parts 1 and 2 (2002), S. 697-702
10. Estrin, Y.; Baik, S. C.; Kim, H. S.; Hellmig, R. J.: Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing, Mater. Sci. Eng. A 351 (2003), S. 86-97
11. Blank, C.; Kopylov, V. I.; Schneider, M.: Licht- und elektronenmikroskopische Untersuchung an hochverformtem Nickel mit submikrokristallinem Gefüge, Prakt. Metallogr. 41 (2004), S. 589-604
12. Han, H. J.; Huh, M. Y.; Suh, J. Y.; Lee, J. C.: Controlling the textures of the Al alloy sheet via dissimilar channel angular pressing, Mater. Sci. Eng. A 394 (2005), S. 60-65
13. Li, S.; Beyerlein, I. J.; Bourke, M. A. N.: Texture formation during equal channel angular extrusion of fee and bee materials: comparison with simple shear, Mater. Sci. Eng. A 394 (2005), S. 66-77
14. Chung, C. S.; Kim, J. K.; Kim, H. K.; Kim, W. J.: Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing, Mater. Sci. Eng. A 337 (2002), S. 39-44
15. Höppel, H. W.; Zhou, Z. M.; Mughrabi, H.; Valiev, R. Z.: Microstructural Study of the Parameters Governing Coarsening and Cyclic Softening in Fatigued Ultrafine-Grained Copper. Phil. Mag. A 82 (2002), S. 1781-1794
16. Park, K. T.; Lee, H. J.; Lee, C. S.; Nam, W. J.; Shin, D. H.: Enhancement of high strain rate superplastic elongation of a modified 5154 Al by subsequent rolling after equal channel angular pressing, Scr. Mater. 51 (2004), S. 479-483
17. Chuvil'deev, V. N.; Nieh, T. G.; Gryaznov, M. Yu.; Sysoev, A. N.; Kopylov, V. I.: Low-temperature superplasticity and internal friction in microcrystalline magnesium alloys processed by ECAP, Scr. Mat. Vol. 50 (2004), Nr. 6, S. 861-865
18. Ma, A. et al.: Impact toughness of an ultra-fine-grained Al-11mass%Si alloy processed by rotary-die equal-channel angular pressing, Act. Mater. 53 (2005), S. 211-220
19. Höppel, H. W.; May, J.; Göcken, M.: Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bonding, Adv. Eng. Mat. 6 (2004), Nr. 4, S. 219-222
20. Lee, S. W.; Yeh, J. W.; Liao, Y. S.: Premium 7075 Aluminium alloys produced by reciprocating extrusion, Adv. Eng. Mat. (2004) 6, Nr. 12, S. 936-943
21. Kim, W. J.; Hong, S. I.; Kim, Y. S.; Min, S. H.; Jeong, H. T.; Lee, J. D.: Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing, Act. Mater. 51 (2003), S. 3293-3307
22. Chang, J. Y.; Shan, A.: Microstructure and mechanical properties of AlMgSi alloys after equal channel angular pressing at room temperature, Mater. Sci. Eng. A 347 (2003), S. 165-170
23. Shin, D. H.; Ki, J.; Oh, Y. J.; Park, K. T.: Bulk nanostructured steels (BCC), Al alloys (FCC) and pure Ti (HCP) processed by equal channel angular pressing, Mater. Sci. Forum 426-4 (2003), S. 2801-2806
24. Suh, J. Y.; Kim, H. S.; Park, J. W.; Chang, J. Y.: Finite element analysis of material flow in equal channel angular pressing, Scr. Mater. 44 (2001), S. 677-681
25. Beyerlein, I. J.; Lebensohn, R. A.; Tomé, C. N.: Modeling texture and microstructural evolution in the equal channel angular extrusion process, Mater. Sci. Eng. A 345 (2003), S. 122-138
26. Kim, H. S.; Hong, S. I.; Seo, M. H.: Effects of strain hardenability and strain-rate sensitivity on the plastic flow and deformation homogeneity during equal channel angular pressing, J. Mater. Res.16 (2001), S. 856-864
27. Pei, Q. X.; Lu, C.: Couplet thermo-mechanical analysis of severe plastic deformation for producing bulk nanostructured materials, Adv. Eng. Mat. 6 (2004), Nr. 12, S. 933-936
28. Werenskiold, J. C.; Roven, H. J.: Strain measurement in the ECAP process, Zeheth-bauer, M.; Valiev, R. Z. (Hg.): Proc. of the Conference"Nanomaterials by Severe Plastic Deformation" NANOSPD2, Wien (2002), S. 591-596
29. Furukawa, M.; Horita, Z.; Langdon, T. G.: Factors influencing the shearing patterns in equal-channel angular pressing, Mater. Sci. Eng. A 332 (2002), S. 97-109
30. Chang, S. Y.; Lee, J. G.; Park, K. T.; Shin, D. H.: Microstructures and mechanical properties of equal channel angular pressed 5083 Al alloy, Mater. Trans. 42 (2001), S. 1074-1080
31. Barber, R. E.; Dudo, T.; Yasskin, P. B.; Hartwig, K. T.: Product yield for ECAE processing, Scr. Mater. 51 (2004), S. 373-377