Probabilistic micromechanical modeling of fatigue-life variability in an α + β Ti alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 10, 2005, Pages 2621-2631

  Chan, Kwai S ^a   Enright, Michael P ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; FATIGUE OF MATERIALS; GRAIN SIZE AND SHAPE; MATHEMATICAL MODELS; METALLOGRAPHIC MICROSTRUCTURE;

FATIGUE LIFE VARIABILITY; HIGH CYCLE FATIGUE; PROBABILISTIC MICROMECHANICAL MODELING;

TITANIUM ALLOYS;

EID: 27144503385     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0260-7     Document Type: Article

References (52)

1. S.K. Jha and K.S. Ravichandran: Scripta Mater., 2003, vol. 48, pp. 1207-12.
2. S.K. Jha, J.M. Larsen, A.H. Roseberger, and C. Annis: in Materials Damage Prognosis, James M. Larsen, Leo Christodoulou, Jeffrey R. Calcaterra, Michael L. Dent, Mark M. Derriso, William J. Hardman, J. Wayne Jones, and Stephan M. Russ, eds., TMS, Warrendale, PA, 2004, pp. 143-50.
3. C.J. Szczepanski, A. Shyam, S.K. Jha, J.M. Larsen, C.J. Torbert, S.J. Johnson, and J.W. Jones: in Materials Damage Prognosis, James M. Larsen, Leo Christodoulou, Jeffrey R. Calcaterra, Michael L. Dent., Mark M. Derriso, William J. Hardman, J. Wayne Jones, and Stephan M. Russ, eds., TMS, Warrendale, PA, 2004, pp. 315-20.
4. Y. Furuya and S. Matsuoka: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3421-31.
5. Small Fatigue Cracks, R.O. Ritchie and J. Lankford, eds., TMS, Warrendale, PA, 1986.
6. K. Tanaka and Y. Akinwa: in Comprehensive Structural Integrity, R.O. Ritchie and Y. Murakami, eds., Elsevier, Boston, MA, 2003, vol. 4, pp. 165-90.
7. D.L. Davidson, K.S. Chan, R.C. McClung, and S.J. Hudak, Jr.: in Comprehensive Structural Integrity, R.O. Ritchie and Y. Murakami, eds., Elsevier, Oxford, United Kingdom, 2003, vol. 4, pp. 129-64.
8. K.S. Chan, M.P. Enright, and J.S. Kung: in Materials Damage Prognosis, James M. Larsen, Leo Christodoulou, Jeffrey R. Calcaterra, Michael L. Dent., Mark M. Derriso, William J. Hardman, J. Wayne Jones, and Stephan M. Russ, eds., TMS, Warrendale, PA, 2005, pp. 135-42.
9. Design Assessment of Reliability with Inspection® (DARWIN) Software Package, v. 5.1, Southwest Research Institute, San Antonio, TX, 2004.
10. K. Tanaka and T. Mura: J. Appl. Mech., ASME, 1981, vol. 48, pp. 97-103.
11. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117-23.
12. K.S. Chan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 43-58.
13. K.S. Chan and M.P. Enright: in Fatigue 2003, M.R. Bache et al., eds., Engineering Integrity Society, Sheffield, United Kingdom, 2003, pp. 39-48.
14. K.S. Chan: Metall. Trans. A, 1993, vol. 24A, pp. 2473-86.
15. S.D. Antolovich, A. Saxena, and G.R. Chanani: Eng. Fract. Mech., 1975, vol. 7, pp. 649-52.
16. L.F. Coffin, Jr.: Trans. ASME, 1954, vol. 76, pp. 931-50;
17. S.S. Manson and M.H. Hirschbert: Fatigue: An Inter-Disciplinary Approach, Syracuse University, Syracuse, NY, 1964, pp. 133-78.
18. A. Saxena, S.J. Hudak, Jr., and G.M. Jouris: Eng. Fract. Mech., 1979, vol. 12, pp. 103-15.
19. K.S. Chan and M.P. Enright: Proc. Modeling the Performance of Engineering Structure Materials III, T. Srivatsan, D. Lesuer, and E. Taleff, eds., TMS, Warrendale, PA, 2002, pp. 135-42.
20. M.P. Enright and K.S. Chan: J. ASTM Int., 2004, vol. 1 (8), article JAI11566;
21. also K.S. Chan and M.P. Enright: 2005 ASME Turbo Expo, 2005, article GT2005-68983.
22. K.S. Chan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3721-35.
23. J.C. Newman, Jr.: Int. J. Fract, 1984, vol. 24, pp. R131-R135.
24. S. Suresh: Metall. Trans. A, 1985, vol. 16A, pp. 249-60.
25. S. Suresh and R.O. Ritchie: Scripta Metall., 1983, vol. 17, pp. 575-80.
26. S.J. Hudak, Jr. and R.A. Page: Corrosion, 1983, vol. 39, pp. 285-90.
27. K.S. Chan, Y.-D. Lee, D.L. Davidson, and S.J. Hudak, Jr.: International J. Fract., 2001, vol. 112, pp. 299-330.
28. M.H. El Haddad, K.N. Smith, and T.H. Topper: J. Eng. Mater. Technol., ASME Trans., 1979, vol. 101, pp. 42-46.
29. K.S. Chan and T.-Y. Torng: J. Eng. Mater. Technol., ASME Trans., 1996, vol. 118, pp. 379-86.
30. M.P. Enright and Y.T. Wu: Proc. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., Non-Deterministic Approaches Forum, Atlanta, GA, 2003, AIAA article 2000-1647.
31. G.R. Leverant: Final Report No. DOT/FAA/AR-00/64, Federal Aviation Administration, Washington, DC, 2000.
32. Y.T. Wu, M.P. Enright, and H.R. Millwater: AIAA J., 2002, vol. 40 (5), pp. 937-46.
33. L. Huyse and M.P. Enright: Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., Non-Deterministic Approaches Forum, Norfolk, VA, 2003, 2003, Article 2003-1838.
34. M.P. Enright. L. Huyse, R.C. McClung, and H.R. Millwater: Proc. 9th Biennial ASCE Aerospace Division Int. Conf. on Engineering, Construction and Operations in Challenging Environments-Earth & Space 2004, R.B. Malla and A. Maji, eds., ASCE, Houston, TX, 2004, pp. 453-60.
35. J.W. Sheldon, K.R. Bain, and J.K. Donald: Int. J. Fatigue, 1999, vol. 21, pp. 733-41.
36. G. Marci: Int. J. Fatigue, 1994, vol. 16, pp. 409-12.
37. H.D. Döker and G. Marci: Int. J. Fatigue, 1983, vol. 4, pp. 187-91.
38. B.L. Boyce and R.O. Ritchie: Eng. Fract. Mech., 2001, vol. 68, pp. 129-47.
39. Damage Tolerant Design Handbook, Purdue University, West Lafayette, IN, 1994, vol. 3, WL-TR-94-4043.
40. M.D. Raizenne: Fatigue Crack Growth Rate Data for AGARD TX114 Engine Disc, Cooperative Test Programme, Laboratory Memorandum ST-479, National Aeronautical Establishment, Ottawa, Sept. 1987.
41. A.J.A. Mom and M.D. Raizenne: AGARD Report No. 766, AGARD, NATO, Neuilly-Sur-Seine, France, Aug. 1988.
42. Stress Intensity Factors Handbook, Y. Murakami, ed., Pergamon Press, London, 1981, vol. 2, pp. 654-56.
43. S.G. Ivanova, F.S. Cohen, R.R. Biederman, and R.D. Sisson, Jr.: in Fatigue Behavior of Titanium Alloys, R.R. Boyer, D. Eylon, and G. Lütjering, eds., TMS, Warrendale, PA, 1999, pp. 39-46.
44. S.G. Ivanova, R.R. Biederman, and R.D. Sisson, Jr.: J. Mater. Eng. Performance, 2002, vol. 11 (2), pp. 226-31.
45. R.S. Bellows, S. Muju, and T. Nicholas: Int. J. Fatigue, 1999, vol. 21, pp. 687-97.
46. R. Bellows: UDRI Final Report to AFOSR No. F33615-96-C-5269, University of Dayton Research Institute, Dayton, OH, 2001, ch. 3, app. 3C.
47. R. Bellows: UDRI Final Report to AFOSR No. F33615-96-C-5269, University of Dayton Research Institute, Dayton, OH, 2001, ch. 3, app. 3F.
48. C.W. Brown and D. Taylor: Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., TMS-AIME, Philadelphia, PA, 1984, pp. 433-46.
49. K.S. Chan: in Proc. 2nd Int. Symp. on Gamma Titanium Aluminides, Y.-W. Kim, D.M. Dimiduk, and M.H. Loretto, eds., TMS, Warrendale, PA, 1999, pp. 517-25.
50. M.D. Chapetti: Int. J. Fatigue, 2003, vol. 25, pp. 1319-26.
51. D.L. Davidson and K.S. Chan: Acta Metall., 1989, vol. 37 (4), pp. 1089-97.
52. K. Le Biavant, S. Pommier, and C. Prioul: Fat. Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 527-45.