4.05 - Small Fatigue Cracks

Comprehensive Structural Integrity

Volumn 4, Issue , 2007, Pages 129-164

  Davidson, D ^a   Chan, K ^a   McClung, R ^a   Hudak, S ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

SMALL FATIGUE CRACKS;

FATIGUE OF MATERIALS;

EID: 84903431254     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/04073-8     Document Type: Chapter

References (109)

1. ASTM E647-00, 2002, Standard test method for measurement of fatigue crack growth rates. Annual Book of ASTM Standards, vol. 03.01.
2. Barenblatt G.I. On a model of small fatigue cracks. Eng. Fract. Mech. 1987, 28:623-626.
3. Bolingbroke R.K., King J.E. The growth of short fatigue cracks in titanium alloys IM1550 and IM1318. Small Fatigue Cracks 1986, 129-144. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
4. A. Boyd-Lee and J. E. King, 1993, In: "Fatigue Design," ESIS 16, eds. J. Solin et al., Mech. Engineering Publications, London, UK, pp. 283-296.
5. Boyd-Lee A., King J.E. Short fatigue crack path determinants in polycrystalline Ni-base superalloys. Fatigue Fract. Eng. Mater. Struct. 1994, 17:1-14.
6. Brown C.W., Taylor D. The effects of texture and grain size on the short fatigue crack growth rates in Ti-6Al-4V. Proceedings of the International Symposium on Fatigue Crack Growth Threshold Concepts 1984, 433-446. The Metallurgical Society of AIME, Philadelphia, PA. D.L. Davidson, S. Suresh (Eds.).
7. Chan K.S. Local crack-tip field parameters for large and small cracks theory and experiment. Small Fatigue Cracks 1986, 407-425. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
8. Chan K.S. Fatigue crack growth thresholds of TiAl alloys. Proceedings of the 2nd International Symposium on Gamma Titanium Aluminides 1999, 517-525. TMS, Warrendale, PA. Y.-W. Kim, D.M. Dimiduk, M.H. Loretto (Eds.).
9. Chan K.S. A microstructure-based fatigue crack initiation model for structural alloys. Proceedings of Fatigue 2002 2002, vol. 1:347-354. EMAS, West Midlands, UK.
10. Chan K.S., Lankford J. A crack tip strain model for the growth of small fatigue cracks. Scr. Metall. 1983, 17:529-532.
11. Chan K.S., Lankford J. The role of microstructural dissimilitude in fatigue and fracture of small cracks. Acta Metall. 1988, 36:193-206.
12. Chan K.S., Lankford J., Davidson D.L. A comparison of crack-tip field parameters for large and small fatigue cracks. ASME J. Eng. Mater. Technol. 1986, 108:206-213.
13. Chan K.S., Pan Y.-M., Davidson D., McClung R.C. Fatigue crack growth mechanisms in HSLA-80 steels. Mater. Sci. Eng. A 1997, A222:1-8.
14. Chan K.S., Shih D.S. Fatigue and fracture behavior of a fine-grained lamellar TiAl alloy. Metall. Mater. Trans. A 1997, 28A:79-90.
15. Chan K.S., Shih D.S. Fundamental aspects of fatigue and fracture in a TiAl sheet alloy. Metall. Mater. Trans. A 1998, 29A:73-87.
16. Chermahini R.G., Blom A.F. Variation of crack-opening stresses in three-dimensions: finite thickness plate. Theor. Appl. Fract. Mech. 1991, 15:267-276.
17. Chermahini R.G., Shivakumar K.N., Newman J.C. Three-dimensional finite-element simulation of fatigue crack growth and closure. Mechanics of Fatigue Crack Closure, ASTM STP 982 1988, 398-413. ASTM, Philadelphia, PA. J.C. Newman, W. Elber (Eds.).
18. Daeubler M.A., Thompson A.W. Microstructural effects on short fatigue cracks in eutectoid steels. Small Fatigue Cracks 1986, 157-164. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
19. Davidson D.L. The experimental mechanics of microcracks. Small-Crack Test Methods, ASTM STP 1149 1992, 81-91. ASTM.
20. Davidson D.L. Fatigue crack tip constraint and closure as a function of crack length. Small Fatigue Cracks 1999, 109-118. Elsevier, Oxford. K.S. Ravichandran, R.O. Ritchie, Y. Murakami (Eds.).
21. Davidson D.L. Mixed mode crack opening displacement measurements for small fatigue cracks growing in Astroloy at 20°C. Fatigue Fract. Eng. Mater. Struct. 2000, 23:445-452.
22. Davidson D.L., Campbell J.B. New Techniques for Characterizing Corrosion and Stress Corrosion 1996, 163-174. The Metallurgical Society, Warrendale, PA. R.H. Jones, D.R. Baer (Eds.).
23. Davidson D.L., Chan K.S., McClung R.C. Cu-bearing high-strength low-alloy steels: The influence of microstructure on the initiation and growth of small fatigue cracks. Metall. Trans. A 1996, 27:2540-2556.
24. Davidson D.L., Hudak S.J. The crack-tip mechanics and growth rates of small fatigue cracks in ASTROLOY. Metall. Mater. Trans. A 1995, 26:2247-2257.
25. de los Rios E.R., Mohamed H.J., Miller K.J. A micro-mechanics analysis for short fatigue crack growth. Fatigue Fract. Eng. Mater. Struct. 1985, 8:49-63.
26. Deshpande V.S., Needleman A., Van der Giessen E. Discrete dislocation plasticity modeling of short cracks in single crystals. Acta Mater. 2003, 51:1-15.
27. Doker H., Bachmann V., Marci G. Fatigue Thresholds 1982, vol. 1:45-57. EMAS, Warley, UK.
28. Dowling N.E. Crack growth during low-cycle fatigue of smooth axial specimens. Cyclic Stress-Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637 1977, 97-121. ASTM, Philadelphia, PA.
29. Dugdale D.S. Yielding of steel sheets containing slits. J. Mech. Phys. Solids 1960, 8:100-104.
30. El Haddad M.H., Dowling N.E., Topper T.H., Smith K.N. J-integral application for short fatigue cracks at notches. Int. J. Fract. 1980, 16:15-30.
31. El Haddad M.H., Smith K.N., Topper T.H. Fatigue crack propagation of short cracks. ASME J. Eng. Mater. Technol. 1979, 101:42-46.
32. N. A. Fleck and J. C. Newman, Jr., 1988, Analysis of crack closure under plane strain conditions. In: "Mechanics of Fatigue Crack Closure, ASTM STP 982," pp. 319-341.
33. Frost N.E., Marsh K.I., Pook L.P. Metal Fatigue in Engineering 1974, Wiley, New York.
34. Forth S.C., Newman J.C., Forman R.G. Generating fatigue crack growth thresholds with constant amplitude loads. Fatigue 2002 2002, Vol. 4:2337-2344. EMAS, West Midlands, UK.
35. Gangloff R.P. The criticality of crack size in aqueous corrosion fatigue. Res. Mech. Lett. 1981, 1:299-306.
36. Gangloff R.P. Oxygen inhibition model of the chemical crack size effect in corrosion fatigue. Embrittlement by the Localized Crack Environment 1984, 265-290. TMS-AIME, Warrendale, PA. R.P. Gangloff (Ed.).
37. Gangloff R.P. Crack size effects on the chemical driving force for aqueous corrosion fatigue. Metall. Trans. 1985, 16A:953-969.
38. Gangloff R.P., Slavik D.C., Piascik R.S., Van Stone R.H. Direct current electrical potential measurement of the growth of small cracks. Small-crack Test Methods, ASTM STP 1149 1992, 116-168. ASTM. J.M. Larsen, J.E. Allison (Eds.).
39. Gangloff R.P., Wei R.P. Small crack-environment interactions-the hydrogen embrittlement perspective. Small Fatigue Cracks 1986, 239-264. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
40. Hamm R.W., Johnson W.S. A unification of small- and large-crack growth laws. Fatigue Fract. Eng. Mater. Struct. 1999, 22:711-722.
41. max δK-decreasing fatigue crack growth procedures. Small-crack Test Methods, ASTM STP 1149 1992, 197-220. ASTM.
42. Hudak S.J. Small crack behavior and the prediction of fatigue life. ASME J. Eng. Mater. Technol. 1981, 103:26-35.
43. Hudak S.J., Chan K.S. In search of a driving force to characterize the kinetics of small crack growth. Small Fatigue Cracks 1986, 379-405. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
44. Hudak S.J., Chan K.S., Chell G.G., Lee Y.-D., McClung R.C. A damage tolerance approach for predicting the threshold stresses for high cycle fatigue in the presence of supplemental damage. Fatigue-David L. Davidson Symposium 2002, 107-120. TMS.
45. Hudak S.J., Davidson D.L. The dependence of crack closure on fatigue loading variables. Mechanics of Fatigue Crack Closure, ASTM STP 982 1988, 121-138. ASTM, Philadelphia, PA. J.C. Newman, W. Elber (Eds.).
46. James M.N., Sharpe W.N. Closure development and crack opening displacement in the short crack regime for fine and coarse grained A533B steel. Fatigue Fract. Eng. Mater. Struct. 1989, 12:347-361.
47. Kendall J.M., King J.E. Short fatigue crack growth behavior: data analysis effects. Int. J. Fatigue 1988, 10:163-170.
48. H. Kitagawa and S. Takahashi, 1967, In: "Proceedings of the 2nd International Conference on Mechanical Behavior of Materials, Boston, Massachusetts," pp. 627-631.
49. Lamba H.S. The J-integral applied to cyclic loading. Eng. Fract. Mech. 1975, 7:693-703.
50. Lankford J. The growth of small fatigue cracks in 7075-T6 aluminum. Fatigue Eng. Mater. Struct. 1982, 5:233-248.
51. Lankford J., Davidson D.L. Near-threshold crack tip strain and crack opening for large and small fatigue cracks. Fatigue Crack Growth Threshold Concepts 1984, 447-463. The Metallurgical Society, Warrendale, PA.
52. J. M. Larsen and J. E. Allison (eds.), 1992, In: "Small-crack Test Methods, ASTM STP 1149," American Society for Testing and Materials.
53. J. M. Larsen, J. R. Jira and K. S. Ravichandran, 1992, Measurement of small cracks by photomicroscopy-experiments and analysis. In: "Small-crack Test Methods, ASTM STP 1149," ASTM, pp. 57-80.
54. McClung R.C. The influence of applied stress, crack length, and stress intensity factor on crack closure. Metall. Trans. A 1991, 22:1559-1571.
55. McClung R.C. A simple model for fatigue crack growth near stress concentrations. J. Pres. Ves. Technol. 1991, 113:542-548.
56. R. C. McClung, 1996, In: "Proceedings of Fatigue 96: The 6th International Fatigue Congress, Berlin, Germany," vol. 1, pp. 113-130.
57. McClung R.C. Analysis of fatigue crack closure during simulated threshold testing. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372 2000, 209-226. ASTM. J.C. Newman, R.S. Piascik (Eds.).
58. McClung R.C., Chell G.G., Russell D.A., Orient G.E. A practical methodology for elastic-plastic fatigue crack growth. Fatigue and Fracture Mechanics: 27th Volume, ASTM STP 1296 1997, 317-337. ASTM. R.S. Piascik, J.C. Newman, N.E. Dowling (Eds.).
59. McClung R.C., Davidson D.L. High resolution numerical and experimental studies of fatigue cracks. Eng. Fract. Mech. 1991, 39:113-130.
60. McClung R.C., Davidson D.L. Near-tip and remote characterization of plasticity-induced fatigue crack closure. Advances in Fatigue Crack Closure Measurement and Analysis: Second Volume, ASTM STP 1343 1999, 106-127. ASTM, West Conshohocken, PA. R.C. McClung, J.C. Newman (Eds.).
61. McClung R.C., Sehitoglu H. Closure and growth of fatigue cracks at notches. J. Eng. Mater. Technol. 1992, 114:1-7.
62. McClung R.C., Thacker B.H., Roy S. Finite element visualization of fatigue crack closure in plane stress and plane strain. Int. J. Fract. 1991, 50:27-49.
63. McDowell D.L. Basic issues in the mechanics of high cycle metal fatigue. Int. J. Fract. 1996, 80:103-145.
64. Miller K.J. The behaviour of short fatigue cracks and their initiation: Part II. General summary. Fatigue Fract. Eng. Mater. Struct. 1987, 10:93-113.
65. Miller K.J. Materials science perspective of metal fatigue resistance. Mater. Sci. Technol. 1993, 9:453-462.
66. Miller K.J. The three thresholds for fatigue crack propagation. Fatigue and Fracture Mechanics: 27th Volume, ASTM STP 1296 1997, 267-286. ASTM. R.S. Piascik, J.C. Newman, N.E. Dowling (Eds.).
67. K. J. Miller and E. R. De Los Rios (eds.), 1986, "The Behavior of Short Fatigue Cracks," European Group on Fracture, Publication No. 1.
68. K. J. Miller and E. R. De Los Rios (eds.), 1992, "Short Fatigue Cracks," European Structural Integrity Society, Publication 13, Mechanical Engineering Publications, London.
69. NASGRO™, 2002, Reference Manual, Version 4.01, Southwest Research Institute.
70. Navarro A., de los Rios E.R. An alternative model of the blocking of dislocations at grain boundaries. Phil. Mag. 1988, 57:37-42.
71. J. C. Newman, Jr., 1983, Nonlinear fracture mechanics approach to the growth of small cracks. In: "Behaviour of Short Cracks in Airframe Components, AGARD CP-328," ed. H. Zocher, pp. 6.1-6.26.
72. Newman J.C. A crack opening stress equation for fatigue crack growth. Int. J. Fract. 1984, 24:R131-R135.
73. Newman J.C. A review of modeling small-crack behavior and fatigue-life predictions for aluminum alloys. Fatigue Fract. Eng. Mater. Struct. 1994, 17:429-439.
74. Newman J.C. Fatigue-life prediction methodology using a crack-closure model. J. Eng. Mater. Technol. 1995, 117:433-439.
75. J. C. Newman, Jr., 2002, Advances in finite-element modeling of fatigue-crack growth and fracture. In: "Proceedings of Fatigue 2002," ed. A. F. Blom, West Midlands, UK, vol. 1, pp. 55-70.
76. Newman J.C., Swain M.H., Phillips E.P. An assessment of the small-crack effect for 2024-T3 aluminum alloy. Small Fatigue Cracks 1986, 427-452. The Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
77. Nisitani H., Kawagoishi N., Goto M. Handbook of Fatigue Crack Propagation in Metallic Structures 1994, 733-778. Elsevier, Amsterdam, The Netherlands. A. Carpinteri (Ed.).
78. Pearson S. Initiation of fatigue cracks in commercial aluminum alloys and the subsequent propagation of very short cracks. Eng. Fract. Mech. 1975, 7:235-247.
79. Petit J. Influence of environment on small fatigue crack growth. Small Fatigue Cracks: Mechanics, Mechanisms, and Applications 1999, 167-178. Elsevier. K.S. Ravichandran, R.O. Ritchie, Y. Murakami (Eds.).
80. R. S. Piascik, 1999, The growth of small corrosion fatigue cracks in alloy 7050. In: "Proceedings of FATIGUE '99 Conference Volume IV," eds. X.-R. Wu and Z.-G. Wang, pp. 2237-2242.
81. Piascik R.S., Willard S.A. The growth of small corrosion fatigue cracks in alloy 2024. Fatigue Fract. Eng. Mater. Struct. 1994, 17:1247-1259.
82. Ravichandran K.S., Larsen J.M. Behavior of small and large fatigue cracks in Ti-24Al-11Nb-effects of crack shape, microstructure and closure. Proceedings of Fracture Mechanics: 22nd Symposium, ASTM STP 1131 1992, vol. I:727-748. ASTM, Philadelphia, PA.
83. Small Fatigue Cracks: mechanics, Mechanisms, and Applications 1999, Elsevier, Oxford, UK. K.S. Ravichandran, R.O. Ritchie, Y. Murakami (Eds.).
84. W. T. Riddell, R. S. Piascik, M. A. Sutton, W. Zhao, S. R. McNeill and J. D. Helm, 1999, Determining fatigue crack opening loads from near-crack-tip displacement measurements. In: "Advances in Fatigue Crack Closure Measurement and Analysis, ASTM STP 1343," 157-174.
85. Small Fatigue Cracks 1986, Metallurgical Society, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
86. Ritchie R.O., Peters J.O. Small fatigue cracks: Mechanics, mechanisms, and engineering applications. Mater. Trans. 2001, 42:58-67.
87. Ritchie R.O., Suresh S. Some considerations on fatigue crack closure at near-threshold stress intensities due to fracture surface morphology. Metall. Trans. A 1982, 13:937-940.
88. Ritchie R.O., Yu W. Short crack effects in fatigue-a consequence of crack tip shielding. Small Fatigue Cracks 1986, 167-189. TMS, Warrendale, PA. R.O. Ritchie, J. Lankford (Eds.).
89. Sehitoglu H., Sun W. Modeling of plane strain fatigue crack closure. ASME, J. Eng. Mater. Technol. 1991, 113:31-40.
90. Shih C.F., Hutchinson J.W. Fully plastic solutions and large scale yielding estimates for plane stress crack problems. AMSE Trans., J. Eng. Mater. Technol. 1976, 98:289-295.
91. Suresh S. Fatigue crack deflection and fracture surface contact: micromechanical models. Metall. Trans. A 1985, 16A:249-260.
92. Suresh S. Fatigue of Materials 1998, Cambridge University Press, Cambridge. 2nd ed.
93. Suresh S., Ritchie R.O. A geometric model for fatigue crack closure induced by fracture surface roughness. Metall. Trans. A 1982, 13A:1627-1631.
94. Suresh S., Ritchie R.O. The propagation of short fatigue cracks. Int. Metals. Rev. 1984, 29:445-476.
95. Swain M.H. Monitoring small-crack growth by the replication method. Small-Crack Test Methods, ASTM STP 1149 1992, 34-56. ASTM.
96. Tanaka K. The cyclic J-integral as a criterion for fatigue crack growth. Int. J. Fract. 1983, 22:91-104.
97. K. Tanaka, 1985, Short-crack fracture mechanics in fatigue conditions. In: "Current Research on Fatigue Cracks," Materials Research Series, eds. T. Tanaka, M. Jono and K. Komai, The Society of Materials Science, Japan, vol. 1, pp. 79-100.
98. Tanaka K., Nakai Y., Yamashita M. Fatigue growth threshold of small cracks. Int. J. Fract. 1981, 17:519-532.
99. Taylor D., Clancy O.M. The fatigue performance of machined surfaces. Fatigue Fract. Eng. Mater. Struct. 1991, 14:329-336.
100. Tokaji K., Ogawa T., Osako S. The growth of microstructurally small fatigue cracks in a ferritic-pearlitic steel. Fatigue Fract. Eng. Mater. Struct. 1988, 11:331-342.
101. Topper T.H., El Haddad M.H. Fatigue strength prediction of notches based on fracture mechanics. Fatigue Thresholds: Fundamentals and Engineering Applications 1981, 777-798. Engineering Materials Advisory Services, Warley, UK. J. Bäcklund, A.F. Blom, C.J. Beevers (Eds.).
102. Turnbull A. A theoretical evaluation of the influence of mechanical variables on the concentration of oxygen in a corrosion fatigue crack. Corr. Sci 1982, 22:877-893.
103. Ueno A., Kishimoto H. Proceedings of the International Conference on Fatigue in the Very High Cycle Regime 2001, 111-117. University of Agricultural Sciences, Vienna, Austria. S. Stanzl-Tschegg, H. Mayer (Eds.).
104. Vaidya W.V. Fatigue threshold regime of a low alloy ferritic steel under closure-free testing conditions: Part II. Hysteresis in near-threshold fatigue crack propagation: An experimental assessment. J. Test. Eval. 1992, 20:168-179.
105. Wagner L., Gregory J.K., Gysler A., Luetjering G. Propagation behavior of short cracks in a Ti-8.6Al alloy. Small Fatigue Cracks 1986, 117-128. The Metallurgical Society. R.O. Ritchie, J. Lankford (Eds.).
106. Wang C.H. Effect of stress ratio on short fatigue crack growth. J. Eng. Mater. Technol. 1996, 118:362-366.
107. Wang C.H., Hutchinson J.W. Interactions of fatigue cracks with elastic obstacles. Int. J. Fract. 2001, 109:263-283.
108. Wilkinson A.J., Roberts S.G., Hirsch P.B. Modelling the threshold conditions for propagation of stage 1 fatigue cracks. Acta Mater. 1998, 46:379-390.
109. Williams D.R., Davidson D.L., Lankford J. Fatigue crack tip plastic strains by the stereoimaging technique. Exp. Mech. 1980, 20:134-139.