The effect of total hip arthroplasty cup design on polyethylene wear rate

Journal of Arthroplasty

Volumn 20, Issue SUPPL. 3, 2005, Pages 63-72

  Hamilton, William G ^a   Hopper Jr , Robert H ^a   Ginn, Stuart D ^a   Hammell, Neil P ^a   Engh Jr , C Anderson ^a   Engh, Charles A ^a  

^a ANDERSON ORTHOPAEDIC RESEARCH INSTITUTE   (United States)

Author keywords

Clinical outcome; Effect of implant characteristics and cup design; Effect of patient demographics; Polyethylene wear; Primary porous coated total hip arthroplasty

Indexed keywords

CHROMIUM; COBALT; POLYETHYLENE;

ACETABULAR CUP; AGED; AVASCULAR NECROSIS; COMPOSITE MATERIAL; COMPUTER AIDED DESIGN; CONFERENCE PAPER; FEMALE; FEMUR HEAD; GAMMA IRRADIATION; HIP ARTHROPLASTY; HIP DYSPLASIA; HIP FRACTURE; HUMAN; INSTRUMENT STERILIZATION; MAJOR CLINICAL STUDY; MALE; MATERIAL COATING; MULTIPLE REGRESSION; OSTEOARTHRITIS; RHEUMATOID ARTHRITIS; TOTAL HIP PROSTHESIS;

ACETABULUM; ADULT; AGED; AGED, 80 AND OVER; ARTHROPLASTY, REPLACEMENT, HIP; FEMALE; HIP PROSTHESIS; HUMANS; MALE; MATERIALS TESTING; MIDDLE AGED; POLYETHYLENE; PROSTHESIS DESIGN;

EID: 26444433856     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arth.2005.05.007     Document Type: Conference Paper

References (32)

1. P.A. Devane, and J.G. Horne Assessment of polyethylene wear in total hip replacement Clin Orthop 369 1999 59
2. P.A. Devane, J.G. Horne, and K. Martin Three-dimensional polyethylene wear of a press-fit titanium prosthesis. Factors influencing generation of polyethylene debris J Arthroplasty 12 1997 256
3. A. Joshi, T. Ilchmann, and L. Markovic Socket wear in bilateral simultaneous total hip arthroplasty J Arthroplasty 16 2001 117
4. T.P. Schmalzried, F.J. Dorey, and C.D. McClung Factors contributing to the variability of short-term radiographic wear rates in total hip replacement Orthop Trans 22 1998 81
5. T.H. Eickmann, D. Green, and T. Donaldson Backside wear in retrieved Hylamer liners Presented at the 16th Annual Symposium of the International Society for Technology in Arthroplasty, San Francisco, CA, September 2003
6. J.P. Collier, L.C. Sutula, and B.H. Currier Overview of polyethylene as a bearing material: comparison of sterilization methods Clin Orthop 333 1996 76
7. G. Digas, J. Kärrholm, and B. Nivbrant Increased femoral head penetration using polyethylene sterilized with ethylene oxide Presented at the European Federation of National Associations of Orthopaedics and Traumatology, Rhodes Congress, Greece; June 2001
8. T. Donaldson, P.A. Williams, and I.C. Clarke Radiographic wear analysis of Hylamer cups. Differences with sterilization and storage methods Presented at the 16th Annual Symposium of the International Society for Technology in Arthroplasty, San Francisco, CA, September 2003
9. R.H. Hopper Jr., A.M. Young, and K.F. Orishimo Effect of terminal sterilization with gas plasma or gamma radiation on wear of polyethylene liners J Bone Joint Surg Am 85 2003 464
10. Z.M. Jin, D. Dowson, and J. Fisher A parametric analysis of the contact stress in ultra-high molecular weight polyethylene acetabular cups Med Eng Phys 16 1994 398
11. T.A. Maxian, T.D. Brown, and D.R. Pedersen The Frank Stinchfield Award. 3-Dimensional sliding/contact computational simulation of total hip wear Clin Orthop 333 1996 41
12. H. McKellop, B. Lu, and S. Li Wear of acetabular cups of conventional and modified UHMW polyethylene compared on a hip joint simulator Presented at the Ann Meet Orthop Res Soc 1992
13. H. McKellop, F.W. Shen, and B. Lu Development of an extremely wear-resistant ultra high molecular weight polyethylene for total hip replacements J Orthop Res 17 1999 157
14. H. McKellop, F.W. Shen, and B. Lu Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene. A hip-simulator study J Bone Joint Surg Am 82 2000 1708
15. C.J. Sychterz, C.A. Engh Jr., and A.M. Young Comparison of in vivo wear between polyethylene liners articulating with ceramic and cobalt-chrome femoral heads J Bone Joint Surg Br 82 2000 948
16. C.J. Sychterz, K.F. Orishimo, and C.A. Engh Sterilization and polyethylene wear: clinical studies to support laboratory data J Bone Joint Surg Am 86 2004 1017
17. B.K. Vaughn, T.B. Dameron Jr., and T.W. Bauer Early osteolysis following total hip arthroplasty with use of a Hylamer liner in combination with a modular ceramic femoral head. A case report J Bone Joint Surg Am 81 1999 1446
18. K. Yamauchi, Y. Hasegawa, and S. Iwasada Head penetration into Hylamer acetabular liner sterilized by gamma irradiation in air and in a nitrogen atmosphere J Arthroplasty 16 2001 463
19. M. Kligman, H. Michael, and M. Roffman The effect of abduction differences between cup and contralateral acetabular angle on polyethylene component wear Orthopedics 25 2002 65
20. A.P.D. Elfick, S.L. Smith, and A. Unsworth Variation in the wear rate during the life of a total hip arthroplasty J Arthroplasty 15 2000 901
21. J. Fisher, P. Firkins, and E.A. Reeves The influences of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene Proc Inst Mech Eng [H] 209 1995 263
22. K.F. Orishimo, R.H. Hopper Jr., and C.A. Engh Long-term in vivo wear performance of porous-coated acetabular components sterilized with gamma irradiation in air or ethylene oxide J Arthroplasty 18 2003 546
23. J.M. Martell, and S. Berdia Determination of polyethylene wear in total hip replacements with the use of digital radiographs J Bone Joint Surg Am 79 1997 1635
24. P.A. Devane, R.B. Bourne, and C.H. Rorabeck Measurement of polyethylene wear in metal-backed acetabular cups. I. Three-dimensional technique Clin Orthop 319 1995 303
25. C.J. Sychterz, C.A. Engh Jr., and A.M. Yang Analysis of temporal wear patterns of porous-coated acetabular components: distinguishing between true wear and so-called bedding-in J Bone Joint Surg Am 81 1999 821
26. E.J. Pedhazur Multiple regression in behavioral research: explanation and prediction 1997 Harcourt Brace Philadelphia
27. C.D. McClung, C.A. Zahiri, and J.K. Higa Relationship between body mass index and activity in hip or knee arthroplasty patients J Orthop Res 18 2000 35
28. T.P. Schmalzried, E.S. Szuszczewicz, and M.R. Northfield Quantitative assessment of walking activity after total hip or knee replacement J Bone Joint Surg Am 80 1998 54
29. C.J. Sychterz, A.M. Young, and C.A. Engh Effect of radiographic quality on computer-assisted head penetration measurements Clin Orthop 386 2001 150
30. A.J. Hui, R.W. McCalden, and J.M. Martell Validation of two and three-dimensional radiographic techniques for measuring polyethylene wear after total hip arthroplasty J Bone Joint Surg Am 85 2003 505
31. R.H. Hopper Jr., A.M. Young, and C.A. Engh Jr. Assessing the pattern of femoral head penetration after total hip arthroplasty J Arthroplasty 19 Suppl 2 2004 22
32. R.H. Hopper Jr., C.A. Engh Jr., and L.B. Fowlkes The pros and cons of polyethylene sterilization with gamma irradiation Clin Orthop 429 2004 54